What material is the blackboard made of? Slate chalk boards (and walls) - DIY in the kitchen

At a certain age - not very respectable, but already almost reasonable, everyone was mischievous and schoolchildren. Even inveterate honors students dreamed of conducting a smelly chemical experiment under the window of an athlete - so as not to force a scientist to hang out on a horizontal bar like a sausage. Having your inventive backbiters, you already have to ask the exact opposite question: How to eliminate the consequences of the actions of a household demon? Today, specifics are on the agenda: Do-it-yourself school board made or restored.

Today we will make a modern school board

Board materials and accessories

First you need to find out what the modern blackboard is made of? We will need:

• Chipboard for hard base. Sanded, 16 mm thick.
• Frosted glass front. You can take thin, but not less than 3 millimeters.
• U-shaped aluminum profile 25 mm wide (including 3 mm glass). The internal distance in such a profile is 20 mm - just right for our purposes.
• Matte enamel dark green or black. If you can buy paint with fine porcelain abrasive (used in machine tools and for painting outboard motors) - it will be just perfect. It will last ten years longer.
• High-quality insulating tape for the seal - so as not to reinvent the wheel.
• Sheds on the wall.
• Silicone sealant or glass adhesive.
• Self-tapping screws.

If you intend to make a swing board, in the manner of a trellis, you will need butterfly loops. But today the school will manage with the usual textbook measuring 2000x1350x25 mm.

Blackboard detailing

In any case, you will have to order glass cutting in the workshop. We recommend that you immediately pay for handling and shipping - to avoid injuries and accidents.

• Glass 1997x1347 mm.
• Chipboard 1999x1349 mm.
• 2002 mm - 2 pieces, upper and lower profile.
• 1347 mm - 2 pcs., side profiles.

All aluminum profiles are sawn at an angle of 45 degrees and the saw cut is processed with a small file or needle file.

Making a blackboard

Before you make a school board, you need to glue the main surfaces and process them. We used a table smaller than a blackboard and occupied it for three days.

Place chipboard on the table and carefully remove crumbs, sawdust, etc. from the surface with a damp cloth. Apply adhesive in strips parallel to the long side of the board, spaced approximately 50mm apart. Ask someone to help you, because it is almost impossible to carefully place the glass in a horizontal position on top of the adhesive base alone.

Glass needs to be “fidgeted” a little, pressing it over the entire surface. It is smaller than the base, so distribute the tolerances evenly and immediately grab the perimeter with electrical tape. The tape should not be wider than the grips of the aluminum profile.

The glue will dry for about a day, but after three hours you can start painting the glass. Enamel will lie well on frosted glass if you do not decide to apply it with a brush. For a spray gun, the paint must be diluted with an appropriate solvent in a ratio of 5:1. Two approaches with a break of a day were enough for us to achieve a uniform color and an acceptable surface.

We snap the aluminum profile only after the complete drying of the coating and glue. You can fix it in the ends of the chipboard with 4x16 self-tapping screws around the perimeter of the board. Since it does not carry any load, but serves only as a frame, this will be enough.

We figured out how to make a school board ourselves, or rather, for now, only a school board module. It can simply be hung on the wall by screwing elementary fasteners to the base, or it can be combined with mechanisms or fixtures.

So, taking a wider profile and gluing glass on both sides of the chipboard, we get a ready-made module for a turntable or hinged blackboard. Using a sheet of metal instead of glass (of course, not a three-millimeter thickness, 0.4 mm body sheet is quite enough), we get a magnetic board and so on.

It is not always convenient to leave messages to your relatives on the phone. Imagine such a situation, a mother left early for work, and she wants to give certain instructions to her child. By sending a message to the phone, she can wake him up.

And sometimes you forget what you wanted to say.

DIY slate board

Making a slate board is very exciting and it is not at all difficult to make it.

The instructions described in this material will give you the knowledge of how to make a slate board yourself.

Materials such as:

• one of the types of bases: a plywood board, a special sanded blank or a regular cutting board;
• glossy acrylic paint;
• a special powder that is used to grout tile joints;
• brush for painting medium hardness;
• a bowl for preparing paint for coloring the board.

The paint for the slate board is made according to a special recipe. If you start painting the board only with glossy acrylic paint without adding certain components, then all the work will be done in vain.

All because it is impossible to make inscriptions on this board. The recipe for making a coloring agent is as follows: in a bowl, mix the coloring agent with the mashing agent, observing the dosage - one share of the mashing agent for 1.5 cans of the coloring agent. Now you know how to paint the reminder board.

It is necessary to make paint strictly according to the instructions. Coloring should be done quickly and accurately. This is due to the fact that the paint with the above powder dries very quickly and bumps and lumps may remain.

After the board has been painted, it needs to dry thoroughly. Upon completion of drying, the board can be tested. Due to the fact that the surface of the board turned out to be rough, it is good to write on it with chalk. The inscriptions are quite clear and persistent. A do-it-yourself board can be many times superior to the store version.

When painting the board, you can safely experiment with the color palette, so you can get the following options:

• gray slate board;
• black slate board;
• green slate board;
• slate board white.

As you can see, it is not necessary to follow the classic black slate version.

How to make a magnetic chalkboard

Often, the store version of a magnetic slate board is much inferior in quality. Over time, it becomes more and more difficult to write on it with chalk.

The surface of the board deteriorates, as a result of which the chalk scratches the board and thus the inscriptions are harder to wash off.

Contrary to this, the situation can be corrected by making a magnetic board at home.

To make it, you will need materials such as:

1. The foundation. The basis can serve as materials such as: chipboard, plywood with a thin layer, PVC.
2. magnetic ground. It contains metallic particles.
3. Slate effect paint.

You can make your own paint with the effect of a slate board.

You'll need:

• latex paint - 1 glass;
• cement - 2 tablespoons;
• capacity;
• large mixing spoon

IMPORTANT!!! Pay attention to the fact that there is no sand in the cement.

Cooking method

Pour two tablespoons of cement into a mixing container and mix with one glass of latex paint. We mix everything well. Paint is ready!

As for the manufacturing process itself of the above board, at the initial stage the board must be covered with magnetic soil. It should be noted that the primer is applied to a degreased surface. Magnetic primer should be applied in four layers. The more layers, the better the magnets will stick. Now you need to leave the board to dry for a whole day.

Then you can paint it. You need to paint with a special roller or brush.

The paint usually dries within one day. Further, the board can be safely tested and various magnets can be attached to it.

Magnetic chalkboard for children will be a real entertainment and a way to learn something new for yourself.

A magnetic slate board on the refrigerator will allow you to leave up-to-date messages to the household.

To date, the use of a slate board in the interior is a rather creative solution that allows you to bring some zest to the home atmosphere!

It is appropriate to use a slate board not only in a children's room so that small children do not paint the walls, but in other rooms the board will look great.

For example, as a place for reminders, such an interior element will look great in the kitchen.

Also, the board will refresh the design of the bedroom or living room due to the fact that on the board there is an opportunity to leave drawings in addition to notes.

The board, as a home decoration, is convenient because you can change the drawings in connection with a change in taste, mood.

Slate board in the interior of the kitchen

Coming to cafes, bars and restaurants, we often notice that there is a board hanging behind the cash register where the menu or all possible promotional offers are written.

As a rule, such a board is somewhat reminiscent of the board that was within the walls of the school. To date, the slate board is one of the most original and beautiful ways to tell about new dishes, novelties and promotions.

Have you ever thought about the fact that this idea can be borrowed for your kitchen? Just imagine how convenient it is!

On such a board, you can write all possible reminders, wishes for a good day to your household. Also, you can write the menu on a slate board, write down current recipes and write to your husband about the purchases that he has to make in the supermarket. As you can see, there are a lot of advantages.

Also, shelves can be nailed to the slate board on which you can lay out jars of spices, exclusive homemade wines, and then sign the names of these products on the board. Looks very creative and beautiful! Also, on the board, you can leave drawings on culinary topics.

The slate board compactly fits into the interior of the kitchen, as it fills the wall space. In order to save space, the board can also be used as a hanger. You can nail special hooks to it and hang kitchen towels and a kitchen apron. As they say, beautiful and useful!

Also, the board can be diversified by attaching magnets and stickers. If you study the reviews on the Internet about the slate board in the kitchen, you can once again be convinced that this attribute is very convenient.

The board can be placed not only on the wall, but also on the refrigerator, on the kitchen door.

Slate board for kids

A slate board on the wall in your child's nursery will come in handy! This is a universal way to help kill two birds with one stone.

On the one hand, you instill a love for such art as drawing, and on the other hand, you will save a decent amount on repairs and thus make the interior of the room creative.

As for the design of the walls, you can decorate them either partially with a slate board or completely. If you decide to decorate all the walls with such a board, then choose a color of light colors.

The slate board in the interior of the nursery looks just great! The slate drawing board will delight them.

Such a board is also useful in that it can be used to awaken a child's interest in school and study. The child will be happy to play with you or other children in school.

In addition, when the child grows up a little and goes to study in the first grade, it will be much more interesting for him to learn lessons using a slate board. In addition, it is very convenient for parents, because it is much easier to explain on the board than in a notebook.

As mentioned above, the slate board can perfectly act as a decor for the interior of the house.

To date, there are a great many varieties of this board. The sizes are different. Also, there are planks in a frame, and without. They can be purchased both in a special supermarket and made by hand.

And most importantly: the board provides an opportunity to create, to show their creativity in any way.

A small slate board looks very nice as a picture in the living room or in the bedroom. On such a small board, you can create small pictures, funny illustrations that refresh any interior design.

A frameless slate board looks good in the kitchen.

There are curly slate boards.
Often, they decorate the living room, bedroom, children's room.

This type of plank can be placed above the fireplace, above the exquisite chest of drawers in the bedroom. It is worth noting that in addition to the children's room, you can completely decorate all the walls in the room with a slate board in the living room or in the office.

A certain charm and comfort of the room will be created.

Question answer:

How to remove chalk marker from chalkboard?
If the inscription that was made with a chalk marker is not erased from the slate board, then in this case it is necessary to use a melamine sponge.

How to remove chalk from a slate board?
You can erase chalk from a slate board with a regular sponge or with a felt sponge. Before you erase the chalk from the board, you need to make sure that the sponge is clean.

What kind of crayons can be used to draw on a slate board?
You can write on the board with thick crayons. It is desirable that they write softly and have a bright shade, so the inscription will be clearly visible.

What is the difference between a slate board and a chalk board?
The slate board differs from the chalk board in that it is processed with special paints and materials, due to which the inscription looks brighter, clearer and more beautiful.

How to make a beautiful inscription on a slate board?
In order to beautifully make an inscription on the board, you must use high-quality crayons or a chalk marker. The crayons should not crumble, but at the same time they should write softly.

Now you know how to properly make a slate board at home without spending extra money.

Now you can easily decorate your home interior and thereby surprise your family and friends.

Chalkboards are a fashion trend for useful and functional interior design. Having started in cafes and bars, now slate boards are often found in ordinary apartments. Some use them to work with children, others - to decorate the interior. If you want to make a drawing board yourself, then this does not require a lot of effort, you will need a minimum of tools and materials.

Step 1. Buy chalk film or slate paint.

Step 4. Finishing touches

Any framed board looks better its flat counterpart, gives the product a finished look, while the created field for writing with chalk will last longer. The frame can be made independently or to order in a framing workshop. Any color and material is selected, the main thing is that you are satisfied with the result. In choosing design options, our photos can come in handy so that you can make the perfect board for your child with your own hands.

As you can see, there is nothing complicated in making a chalkboard. You can easily make your own board and save money. If you want to save time - buy ready-made :) , for you we have prepared in size, color and budget.

The slate board in the interior is an extraordinary solution. If you want to follow the individuality to the end and, and not buy in a store, then you will most likely have a question: what to do with paint? Save money and make your own chalkboard paint.

Whatever surface it is applied to - furniture or a special board, slate paint is completely different from the green or black that is used in schools.

Our paint can cover completely different surfaces: the door of a kitchen cabinet or the head of a bed, turning an ordinary piece of furniture almost into an art object.

Materials:

primer for latex paint
latex paint of any color
mixing container
brush or roller
nozzle "mixer" for a drill

1. Mix latex paint with primer in a container. The ideal mix ratio for chalkboard paint is 1 part primer to 8 parts latex paint.

Stir well, otherwise the primer granules will be visible on the surface of the board. Therefore, it is better to mix with a mixer.

In order to get a blackboard paint of a beautiful slate color, and not a mourning color, black paint can be mixed with white, in a ratio of 2.2l: 0.2l (2.2 liters of black paint and 200 ml of white). Then add primer to the mixture.

2. Paint the surface with slate paint. The surface must be prepared in the same way as it is usually done before painting. The paint is applied in two layers.

The color range of paints for chalkboards is endless. You can choose any bright contrasting color.

3. We bring the board "to mind". In order for the board to become finally suitable for drawing, it must be sanded with chalk, then wipe off its traces with a dry cloth in a circular motion.

The chalk board is increasingly finding its use outside the walls of educational institutions. The strict rules for the design of a classic school board have blurred, in their place have come interesting forms and a decorative appearance. The chalkboard has become a part of the interior, allowing not only to decorate the room, but also to bring a useful component to it. Picking up on newfangled trends, designers began to widely use slate surfaces in their projects, photographers included chalk boards in the list of necessary props for photo shoots, calligraphers began to paint slate photo zones at weddings and presentations. Such a creative boom was due to a new look at the good old chalk board.

So I, imbued with this idea, decided to make a chalk board with my own hands. Only I could not find a special paint with the effect of a slate board. As often happens, if you light up some idea, you need to start implementing it on the same day. Patience is not enough, hands itch to get to work. I started looking for an alternative, as it turned out, there is a simple and budget option, which I will talk about in today's master class.

In order to make a slate board with our own hands, we need:

• Acrylic paint for wood;
• Matte black (or other to your taste) acrylic paint for the working surface of the board;
• White Spirit;
• Fugue for tiles (grout for filling tile joints);
• Drill;
• Electric jigsaw or hacksaw;
• Construction primer;
• Brush and foam roller for decorative paint;
• Sandpaper;
• Screw-ring, screws;
• Baguette frame;
• Twine (rope or lace).

Tip: To decorate a chalkboard, you need to find a base with a large flat surface on which we will apply paint. The basis can be a wall in a room, a kitchen cabinet door, a baguette frame with a back wall (back), a sheet of plywood or fiberboard.

An old baguette frame was found in the attic. According to the dimensions of the frame, the back wall is cut out of fiberboard (48x38 cm, thickness 0.5 cm). Since the baguette frame lost its pompous appearance from time to time, and the stucco molding partially fell off, it was decided to remove it and clean the frame of paint.

Gypsum stucco is well removed with a spatula, and old paintwork with sandpaper. We clean the plaster and paint, apply a primer to the cleaned surface. After the primer has dried, cover the frame with two layers of paint with an interval of 24 hours. It remains to decorate the frame itself. We take paint and a brush. With light strokes, without painting over completely, we apply paint to the surface of the frame.

After about forty minutes, we moisten the cotton wool with white spirit and erase with it those places that came out unsuccessfully when stained. You can also walk along the surface to be painted so that the unpainted areas acquire the shade of the decorated paint.

Leave the decorated frame to dry completely. Now it's time to work on the back wall, which will be the basis for the slate board. For reliable adhesion of the paint and the fiberboard sheet, we clean its smooth surface with sandpaper. Then we cover with a primer, after about an hour, we apply a base coat of matte acrylic paint.

We apply homemade slate paint on top of the base layer. In order to make a paint with a slate effect, we need the acrylic matte paint itself and a fugue (tile grout). We take 3 parts of paint and one part of the fugue (3: 1) and mix with each other until smooth.

Tip: In order to minimize the formation of lumps, add the fugue gradually while stirring the paint at the same time. Paint color can be chosen to your taste. If the paint is not light, then the chalk on it will also be clearly visible.

After the mixture of paint and fugue is ready, we roll it out with a foam roller on the surface of the future board. Roll out the paint evenly and in one direction with a roller. The roller needs to be pressed a little when rolling on the fiberboard in order to roll out small lumps and press the fugue particles into the paint. If you want the chalkboard to last for a long time, then cover the base of the board with at least 3 layers.

After the paint on the frame and on the base of the slate board has dried, we combine the frame and the back wall together and fix them together with clamps. On the reverse side, we mark the markings with a pencil, along which we will fasten the frame to the back wall with screws. We take a drill with a drill of a smaller diameter of the screw thread, drill holes and wrap the screws in them.

Tip: By screwing the frame to the fiberboard, we will get a gap between the frame and the fiberboard sheet. Chalk dust will fall into the gap (where glass is usually inserted), which will prevent everything around from being stained with chalk.

Having decided in what position the board will hang (horizontally or vertically), we drill holes for fastening the screw-ring. A ring screw is a screw that has a ring instead of a head. Through this ring, you can thread a rope and hang the board on the wall. According to the thickness of the frame and fiberboard, we measure the length of the screw-ring so that when twisting it does not crawl out onto the front side of the baguette frame.

We clamp the ring screw in a vise along the measured length and bend it. Then we wrap the screw with the ring into the holes until the fold. We insert the rope into the rings and tie it - the chalk board is ready! With proper decoration of the baguette frame, the made coated board can fit into any interior.

Tip: To extend the life of your chalkboard, use soft crayons or a chalk marker.

In the way considered in today's article, if necessary, you can paint any objects and surfaces. With the help of colored crayons, you can create unique props for photo zones, wedding photo shoots and signs for messages to your loved one. If you cover a metal surface with homemade slate paint, then magnets can be attached to the chalkboard. Such a slate-magnetic board will be a great alternative to the refrigerator door. Housewives will appreciate the slate surface in their kitchen.

The chalkboard is great for a kid's room. On it, you can learn the alphabet, train to draw letters with chalk, draw and develop creative abilities in a child.

Such a useful recording tool will become an indispensable assistant in the workshop. It doesn’t matter whether it is sewing or locksmith, there is always a need to make a drawing that will always be in sight when doing work. The most important thing is that at any time you can make changes, erase everything and draw again.

The chalk board fits well into our interior and has become a good helper for organizing time and affairs. In addition, the home organizer from time to time becomes a message board.

The other day I got a large baguette frame from the attic, which I also plan to remake and hang in the room. What will come of this, you will find out in the next article. Subscribe to site updates, join groups on social networks, and you will be aware of new publications!

About the author:

Greetings, dear readers! My name is Maxim. I am convinced that almost everything can be done at home with your own hands, I am sure that everyone can do it! In my free time, I like to craft and create something new for myself and my loved ones. You will learn about this and much more in my articles!