Do-it-yourself wooden hanging swing for children. Outdoor children's swing for giving: types, materials, manufacturing

Site arrangement 23.06.2020

Site arrangement

To take a break from everyday life in a quiet and cozy environment, as well as to please your children, we suggest you build a swing with your own hands. After all, they not only play the role of an element of relaxation, but also have a positive effect on family relationships.

Kinds

All swings can be classified according to the number of rotation axes:

With one axis of rotation. Such swings are easy to perform and are the easiest option. The movement of the seat occurs exclusively back and forth perpendicular to the beam on which the structure is placed. The minimum height from the ground to the seat in this case is 35 cm.

With multiple axes of rotation. In this case, the movement of the seat from side to side is added. Such a design is quite laborious. Suitable for older children. The distance from the seat to the ground is the same - 35 cm.

With one hanging point. The elements with which the swing is set in motion - a chain or a rope - converge at one point under the crossbar. In this case, the distance from the ground to the seat and from the seat to the supports of the structure will be 40 cm.

They are also divided by purpose:

Mobile. This version of the game building has a simple lightweight construct, making it easy to transfer from one place to another. For example, in any place convenient for the game: even in the house, even on the street in the shade.
Family. They have a huge heavy structure. At first glance, it is a bench without supporting elements with a large back. The whole family can fit on such a swing. For its fastening, a U-shaped design is used, and as a fixation, chains or cables that are distinguished by excellent strength are used. This type of play building can be covered with an awning or a roof over it - and ride even in the rain.
Baby. This category of swing is made in the form of boats or hanging chairs. Children will only be able to ride them when adults are near fastened seat belts.

Differentiation by type of construct:

Hammocks. Fastening takes place using a metal crossbar. It can, of course, be exchanged for a sturdy lower branch of the tree, provided it is fairly straight. The weight that the hammock structure can withstand is about two hundred kilograms. When using this construct, you can feel the flight above the ground. This option is very popular with book lovers.
Single. They have a variety of designs. No need to install an additional crossbar. Feature - ease of installation, so this type of swing can be installed anywhere. Various materials are used for the construction.
Sun loungers. Such a system accommodates three people: one child and two adults. The configuration of the swing is such that its fixation is necessary only at one point, so it can also be installed in an apartment. The strength of such a product, despite the apparent lightness, is quite high due to the metal alloy.
Suspended. The design of this version of the swing is usually made from a seat and several cables or strong chains. Cable elements are fastened from each side. The dimensions of such a product are varied: they depend on the materials used. Distinctive qualities of the design are strength, lightness and comfort.

7 photos

Required Tools

Before proceeding with the manufacture of the swing, you must first prepare the required tools and materials. So what we need:

File and sandpaper for metal.
Welding plant.
Electrodes.
Container for the preparation of the solution.
The components for the manufacture of the solution are crushed stone, water, cement, sand.
Fasteners - bolts, nuts.
Metal pipes.
Wrenches.
Shovel.
Grinding machine with discs on a metal surface.

We prepare drawings

After all the preparatory moments are completed, it is necessary to translate the idea on paper. To do this, you need to understand what swing design we will do.

Having decided on the design and type of the swing, mentally imagine it in reality, as if you are already swinging on it. And now it's time to draw them. After completing the sketch, we recommend looking for similar options on the Internet. After all, the drawings can be both unique and those on which work has already been completed. It’s better to “not reinvent the wheel”, but to take ready-made options - this way you will save time and effort.

Below are several options for the drawings, with which you can independently complete the construction in the form of a swing for the guys.

How to make an outdoor swing

from wood

For the manufacture of wooden swing elements, the following material will be required:

Glued laminated timber 8x8 or 10x10 cm.
Thicker plywood.
Solid wood.
Boards.
Chains, nuts, bolts, screws, self-tapping screws, studs.

Manufacturing process:

Using a drill, we pull out 2 holes 1-1.5 deep and 20 cm in diameter.
We make cases of pits from roofing material.
We throw the remains of bricks or large stones into the pits and fill them with concrete.
As soon as the concrete sets, we mount the metal corners for the installation of supports.
The above-ground component of concrete bases must be sanded and painted in a bright shade.
We tighten the base with screws (120 mm). To do this, first make a cut in the beam and install the studs. Using a hacksaw, we cut out the spacers and fasten them to the structure with the help of studs.
Using self-tapping screws, we make a seat from thick plywood. We cover with varnish and fasten on the sides of the chain.
We make cuts in the pillars and install them on the mounted corners.
We hang the seat.

You can learn how to make a wooden swing with your own hands from the following video.

Wooden swing is ready.

metal

In order to lay the supports we need:

74th metal pipe - 2 pcs.
Bearings - 2 pcs.
15th pipe - 1 pc.
cement mortar.
Shovel.
Sand.
Welding machine.
Iron strip 7 cm - 1 pc.

Support installation process:

In thick pipes we make special holes on top. This is necessary so that the crossbar lies on them.
We prepare cement mortar.
Digging holes for supports.
We dig in the pillars and concrete.
On the crossbar we install 2 bearings with steel strip limiters. They must be welded to limit the movement of the bearings from side to side.
We install the crossbar on the support. We also weld it.

The list of necessary materials and tools for organizing a seat for a new swing: Welding machine.

A hammer.
Screwdriver.
Angle grinder.
Pipe bender.
Roulette.
32nd pipe - 8m.
Chain - 6m.
Board 314x25 cm.
Steel strip 341 cm long.
Carabiner for chains - 2 pcs.
Bolts for carabiners - 2 pcs.
Coloring composition and water-repellent liquid.
Small screws - 42 pcs.

Seat manufacturing process:

We bend the pipes as necessary and cook the frame using a welding machine.
We process the wooden surface with a water-repellent liquid and paint with ordinary street paint.
We insert a wooden surface into the frame and fix it in such a way that it holds tightly. This can be done with a metal strip, welded in several places at the back of the seat: on the sides and horizontally along the seat.
We fasten chains with carbines with bolts.
Bearings and chains are also fastened with bolts through iron strips specially bent with a hammer for this purpose. The size of the strips is about 20 cm.

Suspended

The configuration of such a swing can be varied. Here are a few of them:

bungee is the simplest design. It is made from a rope tied at both ends. There should be a solid crossbar on top, and a plank or round crossbar on the bottom.
Tire swing- an option similar to the previous one. Can be hung both vertically and horizontally. From them you can create bizarre shapes, which gives impetus to the creative process of creating a unique swing design.
Another option - a plank or piece of canvas is hung symmetrically on both sides of the edges on two ropes or chains.
With wide seats. This option is usually attached with four ropes or chains. Instead of a wide seat, you can use old chairs without legs, pallets and even benches.
Soft swing. Their design resembles a hammock. They can also be made from a fabric base and wooden sticks, or woven from rope.

One of the hanging swing options will be discussed in the next section of our article.

on a spring

Manufacturing process:

We purchase a truck spring with a height of at least 35 cm at the metal market - this will be our spring.
Dig a hole for our spring.
We assemble the anchor: for this we need a cross (rebar with a diameter of 20 mm can be used) and a pipe 50-60 cm long. These two elements must be welded.
We fasten the anchor and spring with the help of the boss.
We lower the anchor into the pit, level it and fill it with concrete.
We weld the boss to the spring. This is necessary for attaching the swing body.
We take whatman paper and draw the necessary configuration of the body - everything here depends on your imagination. Do not forget about the handles that the baby will hold on to while riding.
We transfer the drawing to plywood and cut it out with a jigsaw.
We fasten the case to the boss using metal strips measuring 30x4 mm and bolts.
We paint the swing in bright colors.

You can also learn more about how to make a swing on a spring with your own hands from the video below.

Now the swing can be used.

We do for houses and apartments

Any homemade design that is used by children at home must meet some safety requirements. This also applies to swings made with your own hands.

7 photos

Requirements:

Material. It must be environmentally friendly. It is advisable to use natural materials. For example, a tree is perfect. And at home it is also a good microclimate that will positively affect the health of your children.
Order. After the child has ridden on the swing, they must be removed. Stay close to him while riding.
Elements of the swing should not be traumatic. Hands and feet should not be confused and stuck in them.
Manufacturing quality. The entire surface of the swing should be smooth - sand it in the best possible way and free it from knots.

Before proceeding with the manufacture, you need to decide on the space where the swing will be located, and prepare all the materials necessary for this.

Materials that we need to make a skating device:

Plywood (board) with dimensions of 400x400 mm for the manufacture of seats.
Limiting bars with dimensions 400x65x20 mm 5 pcs.
Copper tubes 4 pcs. with a diameter of 20 mm: two 65 mm long and 2 125 mm long.
Rope 6 m long.

Manufacturing process:

The seat board and planks must first be processed with a planer. Sharp and protruding parts must be removed.
We drill holes in 4 corners of the seat at a distance of 40 mm from the edges. The diameter of the holes should be 6-10 mm. The limiter bars also need to be drilled with the same distance to the edges. Recall that there are only 5 of them: 2 go to the back, 2 to the sidewalls and 1 to the front.
We collect the entire structure. To do this, we push the rope through all the holes and fix it with reliable knots.
We hang swings and paint.

The swing for the house is ready.

Child safety rules

Here are a few rules to keep your child safe while riding:

If the swing design implies one suspension point, then the fastening of its elements must be made in such a way that the rope or chain does not twist during the swing.
If a chain is used as a hanging component, then it should be sheathed. Unused garden hoses can come to the rescue. This is necessary so that the child's fingers do not get caught in the chain.
Placing two swinging devices on the frame is not allowed. In this case, collisions of children during swinging are possible.
Secure the landing area. Cut bark or sand will soften the blows in case of possible falls.
Make sitting easy. For this, plastic, rubber or wood are suitable.
The seat should be springy. The sides, beaten off with rubber, are quite an acceptable option. This is to protect children from swing hits.
The perimeter of the landing area must be free of plants that could harm the child.
Carefully process all wooden components with a planer, sand and apply varnish on them. So children will be warned against getting splinters and scratches.
Drive all protruding parts in the form of bolts and nails, as well as other metal parts, into the tree.
Of the safer swing designs, L- and A-shaped forms stand out. This is due to the fact that in this case the load on the structure is less than with other forms. The greater the distance between the vertical supports, the more reliable the design and the less wear of parts during the use of the swing.
Hanging swing carabiners tend to wear out quickly - they need to be changed once a year. Use carabiners with plastic inserts, so they will be reliably protected from wear.
Do not use hooks instead of carabiners. In the process of active rocking, they can break, and the child will suffer.
The place where the rope and the attachment point come into contact is best lubricated with machine oil. From this, its service life will increase.
The location of children's swing options must meet safety requirements. These should be places outside any vertical barriers: walls, fences, trees and all kinds of buildings. With a strong rocking, there is a high probability of injury to the child. Additionally, inspect the nearby area for the presence of sharp and cutting elements - they should not be.

Swings in the summer cottage are far from always fun for children. They are mainly used as a decorative element and complement the landscape design. What's more, they serve as a great way to unwind, rocking a little, after a hard day's work at sunset.

In the country, you can build a swing made of wood and metal with your own hands, and it is not at all necessary to buy a new product in a store for unreasonable money.

What are swings made from?

Mostly either wood or metal is used, but both are best, as the warmth of the wood is required as well as the strength of the metal.

This applies mainly to the support of the swing, but the seat can be made from completely different materials, for example, it can be plastic, timber, ropes, chairs or even armchairs. Look at the photo of the garden swing and you will see many options that you didn’t even know about before.

The basic rule of a swing is comfort and safety. The seat and support posts must be very strong in order to withstand several people at once.

To hide from the rays of the sun, you can make a small fabric canopy or from polycarbonate, wooden and roofing elements.

Swing with easy chair

Before you start building, you need to consider the purpose of the swing, namely who will use it, location, seasonality.

It will not be superfluous to choose such a model so that it is combined with the overall picture of the site, that is, with the house, bathhouse and garage.

mobile swing

Such a swing can be assembled and disassembled, as well as transferred to another place. Very handy if you have kids. Such swings can be either on a suspension or on special supports that are installed in the ground.

The best ideas on how to make a swing for kids are in the names of the swings themselves - it can be balance beams, a hammock or even a sofa.

Moreover, you can think about the construction of non-standard swings: in the form of chips, oval, which are hung on a special rack, in the form of various figures of animals and vehicles

Make such a swing for children, and they will spend all their free time without parting with them.

Instructions on how to make a hanging swing

For a hammock swing, a support frame is usually not provided. Only the seat itself is made, which is subsequently hung on a strong chain or rope to beams on the ceiling or massive tree branches on the street.

Tires

The easiest option to make such a swing is to take an old unnecessary tire that has not yet completely deteriorated. She is tied with a strong rope and hung under a tree. In addition to the rope, you can use a chain, which is fixed with a nut and screw.

Moreover, you can not just pass the mount through a hole in the tire, but make three holes in the plane of the rubber and fix the hook mounts there with the help of nuts and wide washers.

Wood

It is also very easy to make. It is necessary to take a strong board and drill four holes in it at the corners. A rope is threaded and also attached to a tree branch. Go ahead and use an old but reliable chair with sawn off legs instead of a board, so your swing will have a back.

Hoop

Be sure to use only a metal hoop, inside which a cobweb with small cells is woven with a rope. To increase the safety of such a swing, it is better to cover the metal frame with foam rubber and secure it. Such a swing is attached in the same way as all the previous ones.

canvas swing

We take a piece of strong tarpaulin, a few corners and riveting. It is important to fold the tarpaulin several times and stitch the layers together with high quality. The material is inserted into triangles along the edges and secured with rivets. With the help of a rope or chain, the swing is suspended from the branches of a tree or the ceiling.

Swing on racks

If you want to make a standard type wooden swing on support posts for the whole family, then you need to draw up the correct drawing and calculate all the dimensions of the future swing for reliable manufacture.

To make them, you will need some materials and tools - a very strong and thick rope, a lot of wooden products from which the seat will be assembled, possibly plywood, as well as fasteners. Do not use nails or self-tapping screws as they will not provide the same security as galvanized bolts.

To build a support, use a large beam that would withstand the required weight. The bars must be driven as deep into the ground as possible so that the swing does not go back and forth when swinging. It is also important to cover all wooden elements with an antiseptic so that the tree does not deteriorate over time.

When you make a garden swing with your own hands, use step-by-step instructions so as not to make mistakes in the construction steps. Keep in mind that swings are fun, but falling off them can be painful.

DIY swing photo

It is a mistake to think that swings are used only for children's entertainment. In addition to the usual children's swing, designed for light weight, there are many original options that can be an excellent design solution and a favorite vacation spot for adult family members.

What material is the swing made from?

The following items can serve as material for the mechanism of this wonderful:

Rope. In this case, the rope will help to build a semblance of a bungee. A thick, smooth log is placed at the end of the rope, which will serve as a seat;

Wood. This material is versatile and fits into any stylization of the site. It is impossible not to mention the cheapness and environmental friendliness of the material. However, wood is not a very durable material, and it is possible to extend the service life with the help of special impregnations;

Metal. Sturdy structures look very original, but the creation of metal structures requires additional skills in welding and blacksmithing. Such models can be welded and forged, in shape - collapsible, stationary and mobile;

Plastic. In order to create a children's summer swing made of plastic, it is enough to purchase ready-made plastic swings, draw a rope through special holes and hang them. Such models are not expensive, look attractive and do not require additional care.

However, such models do not fit into every interior, so they can disrupt the harmonious rural or vintage landscape.

Where to place a swing in the country?

When analyzing the issue of the location of the structure, it is necessary to take into account the features of the site and its styling. These factors affect the design, type and design of the swing.

Most often, structures are placed on playgrounds and recreation areas.

Suspended swings look good on the terrace and are included in the top country design ideas, in which case the roof of the building will reliably protect the decor element from the aggressive natural environment. Also, the suspension mechanism can be located under the arch.

Kind of swing

Before proceeding with the construction of the swing, it is necessary to determine some points:

purpose: fun for children, recreation for adults, or both. Children's swing is the best option for entertainment in the country.

Dimensions. It is necessary to take into account the size of the infield when determining the dimensions of the future swing.

seasonality. Swings made of some materials should not be left to winter in the open.

It is very important to choose the appearance of the structure so that it effectively emphasizes. Swings can be both portable and stationary. Portable models have a collapsible design that is installed on the ground, or suspended. The design can be both traditional and unusual.

Consider the simplest options that you can do with your own hands:

Tire swing

The simplest option is a tire tied with a rope. You can also use a chain and fix it with screws. Another option involves a horizontal arrangement of the tire. It is necessary to cut several holes in the tire (at least 3), insert metal hooks into them and thread chains or ropes.

For jacks of all trades, you can offer a version of a swing made according to a ready-made template (can be found on the Internet). A swing seat in the form of a bird or animal is cut out of the tire and hung on ropes or chains.

Pay special attention to the fixation of the swing elements to avoid injury during operation.

Wooden swing

Wooden swing for giving is a classic model. It is made of a wooden board and a strong rope. It is enough to drill four holes in the corners of the wide board and fix the ropes in them.

An old chair can also be used as a seat. You just need to saw off the legs and hang it on the ropes behind the back and seat.

Swing made from a hoop

It is necessary to braid the metal hoop with a strong rope so that a cobweb is formed in the center. She will act as a seat. To install the swing, you can use a strong rope or other suitable fasteners. You need to hang such a seat at least four points.

Swing made of durable fabrics

Another option for a safe hanging swing for a summer residence. For the seat, you can use a tarpaulin or other sufficiently durable material. The fabric is folded in several layers and stitched around.

The ropes can be attached to the seat with iron triangles and rivets. It remains only to hang the swing to the support (beam, branch, etc.)

Wooden swing on supports

This is perhaps the most interesting and convenient swing option for decorating a personal plot, but nevertheless, it is difficult to manufacture. Consider the algorithm of actions in detail.

To make it you will need:

strong rope;
boards;
material for the manufacture of the seat (fence or plywood);
fixture.

For this type of swing, it is best to use bolts made of galvanized material. Nails and screws are not the best option in this case.

To protect wood from damage and to preserve its natural look, all wooden parts of the structure must be treated with a special antiseptic.

The finished swing is mounted on a support with a transverse beam, for the manufacture of which it is necessary to use a wooden beam.

The ends of the racks that are dug into the ground must be treated with bitumen. To install them, it is enough to prepare a couple of holes with a depth of at least 1 meter. The supports are covered with sand or gravel for about 30 centimeters, and then poured with cement.

If possible, you can make special concrete pillars, and attach wooden supports to them. When choosing the second method, a waterproofing material must be laid at the junction of wood with concrete. For greater stability of the structure, it is necessary to support the racks with diagonal slats.

Step-by-step instructions for making a wooden swing

Now consider the detailed instructions for making the swing itself:

We prepare the supporting arcs. To do this, we need 22 mm boards and 12 mm plywood. We prepare the template and cut out 6 arcs.
Next, we make the core from wood. To do this, outline the plywood blanks. On the outer parts of the arcs, it is necessary to make holes for fastening the ropes.
Using waterproof glue, we connect the parts of the support. We clamp the supports in a vise and leave the glue to dry completely.
Using a grinder, we process the edges of the product, giving them a rounded shape.
It is necessary to cut circles from a wooden board for rope holders. It is best to do this with a special nozzle on a drill.
We cover the manufactured parts with a primer or special paint.
We connect the supports and round elements with metal rings, into which we then pass the rope and cover the element with acrylic paint.
Let's start making the seat itself. The fence needs to be leveled.
Now we will drill holes in each board for fasteners. In order to accurately make holes, you can apply a plywood corner with ready-made holes to each plank.
Next, attach the fence to the supports. In order for the distance between the planks to be the same, you can place the same planks between them.
We attach armrests made of picket fence to the seat. We screw the metal fasteners into the ends of the slats, and install a wooden circle between the support and the armrest.
We pass a strong rope through the rings and tie a strong knot. For greater strength, we wind a wire or a strong rope around the knot. Cut off the free end of the rope with a sharp knife.
We pass the rope through the hole in the armrest and fasten it to the lower corners of the seats in the same way. The armrest itself is supported by pads mounted on a rope.
It remains only to hang the swing to the support using a reliable carabiner and your swing is ready, you can test it and enjoy your vacation.

Features of care

Swings, like other elements of the landscape, require constant care. Try to avoid getting the swing wet. To do this, it is necessary to periodically impregnate the tree with special solutions, varnish or paint.

If you are a rattan owner, avoid getting the swing into sunlight or rain, and care may consist of cleaning the structure with a damp cloth. Owners of metal swings need to periodically restore the decorative layer of the model.

A swing in the country can become not only an amazing element of the interior, but also a joy for both children and adults. You can independently create a design that will cause joy for the whole family and comfort on the site. In addition, hand-made model creation will help you improve your welding skills.

Photo selection of beautiful country swing

In this case, it is important to ensure the convenience and safety of the structure. To do this, prepare the railings and fences. These devices will ensure the safety of the child, who can get carried away and lose attention during the game. Do not forget that all materials must be environmentally friendly, and the use of flammable objects is unacceptable. Wooden models are the most relevant, since in the hot season the metal is very hot, which can harm the child.

Why paint swings?

Painting is necessary to protect the tree from the aggressive action of external factors. Thus, the structure must be treated with a weather-resistant paint from time to time. Also, one should not forget about the aesthetic component of painting the material: the design can not only successfully fit into the styling of the site, but also become its real decoration. To do this, do not be afraid to experiment with painting: you can create beautiful patterns with paint, turning the swing into a work of art or a funny animal.

Ask your question

Do not mistakenly believe that swings in the country are made exclusively for children to have fun. In addition to swings designed for the weight of a child, there are a lot of quite interesting options that will become an excellent element of landscape design and a place of relaxation.

What to make a swing from?

Traditionally, swings are made of wood, metal, and a combination of these materials. However, a swing seat can be made of plastic, metal pipes, bars, a strong rope, an old chair or a chair without legs. Tires and other waste materials are often used.

The main thing is that it is comfortable and safe to sit on the swing, and the racks can withstand the loads exerted on them.

Often country swings are equipped with canopies made of fabric, polycarbonate, wood, roofing materials. Such a “roof” protects from bright sunlight, you can sit on a swing without the risk of burns.

What are the swings?

Soft swing chair

Before building a swing, you should think about their purpose (rolling for children or adults), location (oversized models are inappropriate in small areas), seasonality (it is not appropriate to leave a swing for the winter in the open air at all cottages). It is also important to choose a model that fits well into the overall picture of the country landscape.

Swings can be mobile (collapsible) and stationary.

In turn, mobile swings can be suspended or equipped with a prefabricated frame that is installed on the ground.

Do you want to make a children's swing in the country for a child?

A children's swing is a great idea on how to entertain a child in the country, and the portal site also offers you to get acquainted with the information on. If you already have a sandbox, then read the article about building a playground with your own hands -.

You can independently make a swing-balancer, swing-hammock, swing-sofa. Designs that are far from the classical representation of the swing design deserve special attention. Unusual swings can be:

And more recently, a swing for disabled children has appeared. The design with a platform for a wheelchair allows even those who, unfortunately, cannot move independently to ride.

Garden swing prices

Garden swing

We make a hanging swing with our own hands

A frame is not provided for such a swing. We will only make a seat, which we will later attach with chains or ropes to ceiling beams or thick branches.

Have you decided on the design of the swing?

Option 1. The simplest swing is an old tire tied with a rope and hung on a tree. You can also use a chain and fix it with a screw and nut.

Option 2. We place the tire horizontally. We cut 3 or 4 holes, insert metal hooks into them, which we fix with washers and nuts. We thread ropes or chains into the loops of hooks.

Option 3. This is the most difficult option, which will require the skill of owning an angle grinder. The tire should be cut according to a certain pattern, bent and fixed with long hairpins so that it looks like an animal or bird. One of the ways to make a country swing can be found below.

A swing from a board (a saw cut of a log, a wooden lattice, etc.) and ropes is a classic. It is enough to make 4 holes in the corners of a wide board and thread the ropes.

Instead of a board, you can use an old highchair by sawing off the legs and tying it with ropes.

A metal (steel or aluminum) hoop must be equipped with rope weaving so that a gossamer-seat forms in the center. It is advisable to wrap the edges of the hoop with foam rubber and sheathe it with a dense cloth. And in order to hang the swing, you will need several strong ropes, metal rings or other fasteners that must be fixed at least at four points around the circumference.

As one of the options, you can consider a swing-hoop, inside of which a metal basin is inserted. The edges of the pelvis should firmly hold on to the hoop. Subsequently, the design is easy to disassemble and retrain in a flower garden.

To make such a swing, you will need two wide metal triangles, rivets and the material itself - tarpaulin. We fold it in several layers, stitch it around the perimeter, insert triangles and fasten it with rivets. It remains only to hang the swing on a branch or beam.

To assemble a wooden swing on racks, we prepare the following:

We use galvanized bolts as fasteners for such swings. We refrain from simple screws and nails.

To further protect the material from damage and preserve its natural appearance, we use a glazing. We pre-cover them with all the wooden elements of the structure.

Ready swings are hung on a strong branch or fixed on racks with a cross beam laid on top of them. Use a wooden beam to assemble the supporting structure.

We process the lower ends of the wooden racks with bitumen. To fix the racks, it is enough to dig a couple of holes with a depth of about 1 m, install racks in them, fill 20-30 cm of the height of the hole with a mixture of sand and gravel, and then pour concrete.

If you wish, you can make concrete pillars separately and attach a wooden beam to them with anchor bolts. Do as you please. When using the second method, we must lay a moisture-proof material between metal and wood. To give the frame greater stability, we support the racks with braces.

Swing seat mounting options

We make the swing itself in accordance with the following step-by-step instructions.

First step. We make supporting arches-clubs. To do this, we use boards with a thickness of 22 mm (best of all from pine) and plywood with a thickness of 12 mm. In accordance with the scheme, we draw a template and cut out 6 clubs.

Second step. On blanks from plywood, we outline the outlines of the core. We make a layer in the middle from a glued shield. In the outer layers of the extreme sticks we create cutouts for the ends of the rope.

Third step. We fasten the parts of the support with waterproof glue. We tighten the support with clamps. We remove them only after the glue has completely dried.

Fourth step. We process the edges of the supports with a grinder, giving them a rounded shape.

Fifth step. We cut out circles for rope holders from a pine board. This is easiest to do with the appropriate drill bit.

Sixth step. We process supports and finished rounds with a primer or weatherproof paint.

Seventh step. We screw metal rope holders through the rounds into the supports, and then we cover the wooden elements

Eighth step. Let's move on to creating a seat for a homemade wooden swing. First of all, we align the picket fence.

Ninth step. Next, drill holes for the screws in each bar. In order for the holes to be made as accurately as possible, we put a corner on the edges of the shtaketin (can be made of plywood) according to the size of the planks with pre-made holes in the right places.

Tenth step. We screw the pickets to the supports. To ensure an even step, we place planks between the planks.

Eleventh step. We fix the armrests to the supports. We also make them from shtaketin. We screw the metal bolts into the end of the slats. We lay a wooden round between the support and the armrest.

Twelfth step. We pass the rope through the holes of the holders fixed in the swing support. We tie the rope on a marine knot, after which we wind a wire, a strong thread or a cord around it.

Thirteenth step. Cut off the free end of the rope with a knife.

Fourteenth step. We pass the rope through the oval hole in the armrests. We rely on the armrest itself on pads mounted on a pair of half rings tightened with bolts.

Fifteenth step. We wrap the rope around the thimble for cables and tie it with a rope.

In conclusion, it remains to hang the ring from the Alpine carabiner, fixed to the crossbar of the support or a thick tree branch. Your swing is ready!

Metal swings are also easy to make with your own hands.

First step. We cut blanks from pipes. You need to make 2 two-meter side racks, a 1.5-2-meter crossbar, as well as 4 pipes of arbitrary size for the base (2 pipes will go to each side).

Second step. We clean the pipes from burrs with a metal sandpaper or a file.

Third step. blanks for the base at a right angle.

Fourth step. We weld the racks to the finished base, and then weld the crossbar to the racks.

How to install a crossbar on a metal swing

Fifth step. Let's start earthworks. It is necessary to dig 4 holes with a depth of 80 cm.

Sixth step. We insert metal beams into the finished pits a little longer than the depth of the pits.

Seventh step. We fill the recesses with beams with concrete mortar. Concrete can be made independently from a part of cement, a part of crushed stone and two parts of sand. Add water to the dry mixture and mix thoroughly until a homogeneous mass is obtained.

Eighth step. We leave the concrete for about a week to gain strength.

Ninth step. We weld the hooks to the crossbar. Anchors can be used to make hooks.

Tenth step. We weld the swing frame to the metal beams.

Eleventh step. Attaching the seat.

On this homemade metal swing is ready. You can test and accept for permanent operation.

Video - Do-it-yourself swing for a summer residence

Video - Do-it-yourself children's swing

Many people remember the wonderful song from the movie "The Adventures of Electronics", which sings about swings. In almost every yard, there are always swings - either factory-made metal or home-made, with a wooden seat. And they are never empty, because many people like the feeling of flying. If you want to make a DIY swing for children, this article is for you.

Materials used

First you need to figure out what and how to build a swing. It all probably depends on your goals. If you want to build a structure that will last for generations, use metal. If you are going to hang a temporary swing in the country or in the yard, you can construct it from wood or plastic. Although wooden swings are strong and solid, even if they lose to metal ones in this. Plastic swings are usually built for the smallest toddlers under the age of 5 years.

Each material has its own advantages and disadvantages. If the wood is available, cheap, environmentally friendly, relatively safe, easy to work with; then the metal is durable, fireproof, the swing from it is quite compact. The plastic is light and the kids like its bright colors. The place for installing the swing should be selected based on the following factors:

you must not lose sight of the baby;
safety - you should not arrange flights near wires, water bodies, roads; if there is no choice, try to protect the place of children's games with at least a picket fence;
choose a place that is not too lit by the sun, but not completely in the shade;
if you want to build a swing made of wood, keep in mind that they will quickly deteriorate from excessive dampness;

protection from gusts of wind;
make sure that there are no thickets of toxic, prickly, melliferous, as well as plants that can cause allergies nearby;
the installation site of the swing should be relatively flat;
be sure to check the reliability of fastening of each node.

Varieties of designs

By type of design, swings are frame and suspended, there are even swings on a spring. A large number of variants of these types are presented. This is a swing-pendulum, and a bench-swing, and a "gazebo", and many others. If you have already chosen the material from which you will mount the swing, draw a sketch of the future design. Based on this sketch, draw detailed drawings with all dimensions. It should be noted that some designs may be portable. Usually these are metal swings, as those made of wood require the frame to be securely fixed to the ground.

There are several types of swing frames.

U-shaped- This is the most economical option, as it requires less material. But in order for the structure to be stable, concrete supports are required, therefore, this model belongs to the stationary ones. It is an ideal choice for suspended species installed on soft ground.
L-shaped. This design is more reliable than the previous one. It has 2 side supports on each side, installed at an angle and connected at the top with a jumper.
X-shaped- This is a subspecies of the L-shaped frame. The side supports are placed in such a way that at the top, 20–25 centimeters to the top, their crosshairs are formed, into which the transverse beam is laid. Please note that it is better to strengthen the structure with a side stop.
A-shaped- this is the most stable type of frame due to the use of a side jumper in the design.

The swing drawing includes the following data:

frame type;
swing dimensions;
place of attachment of reinforcing elements (props);
number and type of seats;
suspension type and length.

The dimensions of the swing are taken taking into account the age and height of the child. If you are going to make a swing for growth, then you should adhere to the following dimensions:

ideal width for the seat - 60 cm;
the seat should hang above the ground at a height of 50–55 cm;
the distance from the seat to the crossbar should be at least 1.6 m so that the child can comfortably swing while standing.

Swing suspensions must ensure the safety, reliability and comfort of the swing. As a suspension for self-construction, chains, ropes, even metal pipes can be used. Firms engaged in the production of swings use springs, hydraulic shock absorbers, and a lever system as a suspension. But these types of suspension are too expensive and complicated for do-it-yourself designs. Chains as a suspension are quite expensive, but when adding all the properties, they are the best option. They are durable, the wear points are immediately visible, they do not slow down with a small buildup, but they prevent excessive buildup (due to the friction of the links). But babies can pinch their little fingers, so small-link chains are used for children's swings or protective devices are put on the chains from scraps of rubber hoses.

Using ropes is the easiest and cheapest option., especially if you know the art of tying sea knots. But ropes of any thickness gradually stretch and sag, and spiral twine does not control sway. It is worth taking cross-layered ropes, and also try to use ropes for hanging the simplest swing designs. You should choose ropes made of artificial polymers, such as nylon. Rigid rods (metal pipes) are used, as a rule, using bearings. These swings move smoothly, but they require additional measures to ensure the safety of the child. If you make a swing with such a suspension in your area, take care of the fence and do not let children on them without the supervision of an adult. If such swings are installed in a common yard, they must have a swing height limiter.

How to make for the street?

If you are interested in how to make an outdoor swing for children, then first you should choose a place, material and design. After you have prepared the drawing, calculate the amount of materials and tools needed. Below, for your consideration, several swing options will be offered for installation on the street, in the yard or in the country.