Making a vibrating table yourself. Do-it-yourself vibrating table - various manufacturing options

The production of paving slabs is carried out using the vibrocasting method. For this, a special device is used - a vibrating table. There is nothing to replace it at home, so you have to make it yourself.

How to make a vibrating table for the manufacture of paving slabs? Let's consider this question in more detail.

The process of solidification of concrete, accompanied by small frequent fluctuations, proceeds with the release of air bubbles, compaction of the concrete structure and an increase in the density and strength of the material. To ensure this mode, a vibrating table is used.. It is a surface that makes frequent oscillatory movements (about 3000 / min).

Forms filled with concrete are installed on this surface and vibration treatment is performed. The mode significantly compacts the concrete structure, which significantly affects the quality of paving slabs, the operating conditions of which require great strength.

There are different types of devices, from large industrial ones with a hydraulic source of vibration for processing large concrete blocks, to smaller electric ones that create vibration using an eccentric mounted on an electric motor shaft. Since only the second option is available at home, we will not consider the hydraulic drive device.

Frequency and amplitude of vibrations- characteristics that determine the texture of the processed material. They are set up empirically, it is too difficult to calculate all the nuances in advance, because too many variables are involved in the process.

Therefore, the design of the table should provide for the possibility of some adjustment of the oscillation amplitude.

Find out on our website how to lay. Let's talk about the successive stages of the work performed.

And you will find a lot of useful information about preparing the site for laying paving slabs.

Materials and tools that will be required

The specifics of the device allows the use of only metal elements. All connections are welded or bolted. Accordingly, for the manufacture you need sheet metal with a thickness of 3 mm(the larger the area, the thicker the sheet will be required).

For the bed you need a corner or channel. Table movement is provided by springs, the size of which must correspond to the mass of the table plus the load from the installed molds.

To assemble a vibrating table for paving slabs with your own hands you will need a welding machine, an electric drill with a set of drills for metal. Cutting of metal parts is done by a grinder. You will need a measuring tool, a set of wrenches for threaded connections.

Table legs require secure anchoring to the floor, otherwise, during operation, he will run around the room. It is best to cement the legs into the recesses, for which sheet metal pads must be welded to the ends and deepened by 10-15 cm.

If possible, you should pour anchors into the floor and attach the table to them, this option will allow you to disconnect the device if necessary and move it to another location.

How to make a drawing

Manufacturing work you need to start by creating a drawing of the device. Random fabrication is not recommended, as it is difficult to remake a welded assembly.

All dimensions must be calculated, distances, engine mounting locations so that its location is as close as possible to the center of mass of the table. If the eccentric is located not on the motor shaft, but on a separate drive, then it is placed in the center. The creation of a drawing must begin with a bed.

Height, type of fastening to the floor is taken into account, the perimeter of the strapping of the bed in terms of repeats the outlines of the working surface. This is necessary because the springs are located at the corners and at the center points of the sides of the table.

How to choose the right engine

The table area is selected based on the engine power, which should not be too large. Usually, power up to 1 kW is sufficient.. A table with dimensions of 1500 by 800 mm is suitable for such an engine.

The dimensions are approximate, since the weight of the table and the speed of the motor shaft are not taken into account. In general, care should be taken not so much about power as about the condition of bearings or bushings.

They bear the entire load, and to ensure long-term operation, it is necessary to choose a motor with reliable bearings. If necessary, if the design allows it, engine can be upgraded by removing the bushings and replacing them with reinforced bearings.

If you plan to install an eccentric directly on the motor shaft, such a procedure will greatly extend the performance of the motor.

Manufacturing instructions

On this, the process of assembling a home-made vibrating table for paving slabs can be considered complete, it remains to start the device and adjust the amplitude of oscillations by changing the position of the eccentric.

Important nuances, error prevention

• Along the perimeter of the working surface of the table, a side is needed to prevent the form from slipping with concrete.
• If you use long bolts as guide rods for the springs, you can tighten the springs slightly by screwing on the nuts and washers to fix the table more securely and limit the vibration amplitude.
• Instead of a conventional electric motor, you can use a vibrator of the IV99 type or similar, with which you can more accurately control vibrations and get a high-quality result.

Security measures

All work should be carried out in a room designed for such actions. Welding work, as fire hazardous, must be carried out with the presence of fire extinguishing equipment.

Cutting, drilling and other work with metal is carried out in compliance with safety regulations. Attention should be paid to working with a grinder.

The first start is best done with the drive belt removed. to eliminate the consequences of incorrect connection or fastening of nodes.

Do not forget about protective grounding, which must be connected before the trial run.

In this video, see how you can make a vibrating table for the production of paving slabs with your own hands:

The assembly process of the vibrating table does not take much time, usually its installation is completed in one day.

Setting the mode can be done almost instantly, or drag on for some time, since the best option is found empirically.

The unit made in this way can serve for a long time, and can be used both for the production of paving slabs, and for other work with concrete, ceramics or other compositions that require vibration treatment.

Having a country house, a cottage or a dacha with a personal plot, it may be necessary to equip paths, gazebos, paving yard paving slabs. If you have minimal building skills, desire and interest, you can make tiles yourself. As a result, you can get products that differ in original design, as well as significantly save money.

General characteristics of the vibrating table

For the manufacture of paving slabs at home, you will need raw materials - cement, sand, water, dyes. As well as a device for forming tiles - a vibrating table. In hardware stores you can buy a ready-made mechanism, it will cost between 20 - 70 thousand rubles. Prices vary depending on engine power, configuration and manufacturer.

But if the goal of self-manufacturing paving slabs is to save money and small production volumes are planned, then it makes no sense to purchase a vibration mechanism, you can easily make it yourself.

Homemade vibrating table is a metal structure visually similar to a simple table. Its upper part is attached to the frame with springs or glasses, making a gap. Thanks to the engine fixed in the lower part, the table is subjected to wave oscillations - vibrations, due to this, the cement mass placed in the molds is evenly distributed and air is removed from it.

In principle, in the manufacture of paving slabs, you can do without a table, but in this case the quality of the finished products will be low, and the slabs will not last long. Due to the air inside the mass, the finished plate will be fragile and short-lived.

Necessary materials

For self-production of a vibrating table, you will need simple materials:

• metal corner or pipes;
• Metal sheet;
• springs;
• bolts;
• electric motor;

Metal pipes or corners are necessary to form the bed - a solid frame, support. The metal sheet will act as a countertop, so you should choose a sufficiently strong material with a minimum thickness of 8 mm. Springs are needed to provide a greater amplitude of vibration, they can be purchased from the aftermarket.

Moped springs are best, you will need two of them, they are large enough and you can cut each in half.

During the installation of the vibrating table, the following tools will be needed:

• Bulgarian;
• drill;
• welding machine

With the help of a grinder, pipes or corners are cut in accordance with previously prepared drawings.

A drill will be needed to drill holes when installing the motor. And with the help of a welding machine, the process of assembling all the details of the table into a monolithic structure is carried out.

Homemade vibrating table for paving slabs

How to choose an engine

In order to make a vibrating table for paving slabs with your own hands, you will need an engine. It can be the simplest, taken, for example, from a washing machine.

Power in this case is not the main indicator, it will be better if it is small. The main characteristic should be an eccentric - a device that provides vibration. If not, a household engine and the question of buying it becomes, it is better to buy a motor with an eccentric, for example, the IV-98 or IV-99 model. They are specially designed for installation on vibrating tables. You can buy such engines both new and used, they will cost 5 - 7 thousand rubles.

If you modify a household motor yourself, you will need a sleeve with a screw and a bolt that is attached to the threaded end. When fastening the bolt, it is necessary to ensure its mobility in the transverse direction.

Vibrating table assembly

Before starting the installation of the vibrating table, it is necessary to prepare drawings. Consider the height and length of the future table. In order for it to be convenient in operation, the height should not exceed 90 cm, length 1800 cm, width 700 - 1800 cm.

It is clear that the larger the area of ​​​​the table top, the more forms can be placed on it, but the larger the table, the more powerful the engine will be required. Another important point - you need to decide what the table will be - portable or stationary.

Portable is better to make small dimensions, since it will also be necessary to ensure its stability. If a stationary mechanism is planned, you can safely expand the area, and for stability, dig it into the ground or concrete it.

When the dimensions are determined, you can begin to prepare the details. Four legs must be cut out of the metal corners using a grinder, their length will be in accordance with the drawings, 70 mm. You will also need two segments equal to the length of the table and two segments equal to the width of the table. The bed will be formed from them. Four legs and frame elements are welded together using a welding machine.

The next step in the manufacturing process of the vibrating table is the installation of the tabletop. The top cover should be made of a sheet of durable steel, and the bottom should have attachments for the motor. The lid must be movable, therefore it is attached to the bed with the help of springs or glasses.

It is enough to place four springs at the corners of the table, if the surface is large, you will need two more springs placed in the center. If there is no spring, you can use glasses, you can make them from pipe scraps. Glasses or springs are welded on one side to the tabletop, on the other - to the frame.

Next, you need to install an electric motor. There are a few things to keep in mind when doing this step. If you place the motor horizontally, then the vibration will go in the vertical direction, by placing it straight you get horizontal waves.

Therefore, the most optimal is the location of the engine at an angle of 45o. in this case, the vibration will propagate in both planes. It is necessary to mount the engine securely, since there is a high probability of its displacement during operation, under the influence of vibration.
When preparing drawings and assembling the vibrating table, it is necessary to compare all the details of the future load.

The working surface must support the weight of the molds with the finished cement mass. And the engine power must correspond to the total weight of the table. All elements must be securely welded, the frame must be rigid and durable.

To start a successful activity in the manufacture of paving slabs, more forms will be needed. They can be made from various materials - metal, plastic, wood. Forms can be purchased ready-made, or you can make it yourself, using your imagination to get an original design.

Video: Homemade vibrating table paving slabs

Paving slabs, or paving stones, are a beautiful, durable material that is used for arranging and decorating garden paths, playgrounds and the interior of the yard. Everything would be fine, but, to my great regret, paving stones are not a cheap pleasure, but everyone wants to make their yard clean and pretty, so I had such a great desire. I could not buy paving stones in the required quantity - it turned out to be too expensive, but it was easy to make it myself. :) It is about how to make paving stones on my own that I will tell you in this article, fully illustrating the manufacturing process.

Actually, the technology for the production of paving stones, as well as its recipe, was found by me on the Internet, since there is more than enough information, and I set to work.

For the manufacture of such paving slabs, it is necessary to have cement, sand, a superplasticizer and, if desired, a dye.


In the store, I purchased several bags of cement grade 500 and a superplasticizer, it will increase the strength of the paving stones and increase its resistance to low temperatures.


Not a huge, of course, but quite a decent pile of sand, brought about a year ago from a local quarry, we left after the completion of the house.


And I decided not to buy a colorant-dye. To be honest, as for me, the difference between colored and gray paving stones is small, the color still turns out with a shade of gray!

As a vibrating table, without which the production of high-quality paving stones is simply impossible, it was decided to use an old Siemens washing machine, which has long served its time, but is still very much in working order. If anyone does not know what a vibrating table is for, I explain - with its help, the maximum compaction of the forms of any concrete elements is achieved, in our case paving stones, which become more homogeneous and, accordingly, strong.

I will tell you about the forms separately and in more detail. :)

When I shared the idea of ​​making paving stones on my own with my friends, some of them suggested that I make the molds myself. Some offered to put together forms from old wooden boards, the second advised to use unnecessary containers - trays, vessels, etc., others persuaded to make the forms themselves from a special polymer. Of course, I am a girl with “hands”, but I didn’t dare to do this, I decided to purchase ready-made forms, they are quite diverse, so you can choose a form with a beautiful pattern that will be printed on the surface of the finished product, giving it a special charm and chic.

Buying molds was also not an easy task, for a start it was necessary to decide which molds I needed: rubber, capable of withstanding about 500 castings - manufacturing cycles, plastic, which will last about 250 cycles, or polyurethane, the service life of which does not exceed 100 castings . Rubber and plastic turned out to be quite expensive, and, given that I was not 100% sure of a successful outcome, I purchased ordinary polyurethane molds for making paving stones in the amount of 10 pieces.


I started the production of paving stones back in May, since the weather turned out to be favorable, and I continue to this day, I need a lot of paving stones. :)

Now I will describe to you in detail the technology for the production of paving slabs - paving stones. For one casting, to fill 10 molds, I needed 10 kilograms of sand, 5 kg of cement and 30 grams of superplasticizer.


I thoroughly mixed all of the above components in the usual manual way in a large plastic bucket, and only after that I began to add water in small portions, stirring the mixture until smooth - so that the solution was viscous.


At this stage, the main thing is not to overdo it with water, its excess will reduce the strength of the finished product at times!

In addition to the components listed by me above, fine gravel or screenings can be added to the mixture for casting paving stones.

In addition to the fact that gravel will add even more strength to products, its inclusions will visually make paving stones more natural - “stone”. The ratio of the solution in this case will be as follows: 30 grams of superplasticizer, 2 parts of sand, gravel and cement.


Before pouring our solution into the mold, it must be lubricated with a special emulsion. There are a lot of emulsions on the market for these purposes, but I took the advice of my old friend and processed the forms with ordinary dishwashing liquid - you can use any. I applied the liquid with a small brush, carefully distributing it in a thin layer over the entire inner surface of each form.

After all forms have been processed, they must be slowly filled with a solution. I laid the forms directly on the top cover of the washing machine and, having filled them in half, turned on the machine in the spin mode.


To slightly increase the vibration, I first put an old blanket in the drum of the washing machine. As soon as the machine began to vibrate along with the forms, I added the remaining solution to them, filling them completely. Such an impromptu vibrating table copes with its task perfectly, and the quality of vibrocasting made me very happy.


Then I removed the forms from the washing machine and, having laid them out on racks in the garage, covered them with ordinary plastic wrap to prevent excess moisture from evaporating. Only two days later I removed the paving stones from the molds, it is not recommended to do this earlier because cracks quickly form on the molds during operation.


In order to remove the paving stones from the mold, I lowered them for a few seconds into water heated to 80 ° C, this contributes to the expansion of the mold, as a result, the paving stones are very easy to remove.


The vacated forms were filled with a new portion of the solution, and the paving stones were laid in rows on a pallet left over from the acquired blocks.


Finished products were stored for the first 10 days under plastic wrap, all in the same garage, and then moved outside and kept for another month to gain strength.

Naturally, it makes sense to make paving stones on your own only when you don’t need a lot of it, although the concept of “a lot” is different for each of us. :) But it was this method that turned out to be the most acceptable for me, especially since the work did not take me much time and I did it in the intervals between the main things and, most importantly, with great interest and pleasure.

To make paving stones with your own hands or not, everyone decides for himself, and I can only say that it is exciting, easy and profitable. I hope my little master class on making paving stones will be useful for you, try it and brag about your results.

But how to make a vibrating table (I feel sorry for the washing machine !!!)

How to make it yourself, make such a simple homemade vibrating table from tires. It is very simple and accessible to almost everyone, if you want to make such a vibrating table for home-made paving slabs and other concrete products, you do not need such large tires and such a large piece of metal. To do this, you can use car tires from a car, and if you don’t have such tires, then this is also not a problem, you can buy them for a penny at any vulcanization, there are always mountains of used tires and they will most likely just be presented to you. So we take three tires from a car and twist them together with bolts, three bolts for each connection of one tire to another. Then we need a piece of metal a little larger than the size of the tires, approximately as shown in the photo, such a piece of metal, if you don’t have it, you can buy it at scrap metal collection points, if they don’t have such a piece, then you can order it from them and they will give you it will be found in a few days and sold at the price at which the scrap metal itself is rented, at the rate of 1 kg. it is not very expensive and available to everyone. After you have found the ramps and a piece of metal, you need to weld a piece of the channel in the center to your piece of metal by welding, a piece of the channel can be bought there at the scrap metal collection point, as it was shown in the photo lesson above and drill four holes for attaching the vibration motor. Now you just have to find a used vibration motor, it can be not large, you can use a standard one, for example IV - 99E, such a used vibration motor can be bought at electric motor repair shops or ordered from them, they will find the vibration motor you need very quickly or you can look for such a used vibration motor on the Internet. After you find the vibration motor, you need to screw the vibrator to the mount, the channel that you welded to the metal sheet with bolts, it is best to find the old used bolts as well. they are much stronger and more reliable than new ones, also be sure to use a grower for the vibration motor mounting bolts, tighten the bolts well otherwise they will break. After that, it is necessary to connect a wire to the vibration motor, which must first be passed through a hole made in advance in one of the slopes, as shown in the photo of a home-made vibrating table. After you have connected the wire to the vibration motor, you can install your countertop on the ramps, with the vibration motor at the bottom, so that it goes inside the ramps. All Your vibrating table is ready to go. For even greater convenience, you can scald your countertop with a corner along the contour, you can use it so that the forms with concrete do not shrink or fall during vibration.

Here, as you can see from everything described, it follows that a home-made inexpensive vibrating table for home-made all kinds of concrete products can be made very quickly and
not very expensive. In the future, if you no longer need such a vibrating table, you can sell it to your neighbors and return the funds spent on it. We wish you good luck and for everything to work out for you, we are also always ready to help and advise you, visit our professional forum and we will answer all your questions. Sincerely, Spirit.

Making a vibrating table with your own hands is not as difficult as it might seem at first glance. You just need to stock up on everything you need for this and follow certain instructions. With them, I will introduce you further.

Some general information

What is a molding vibrating table in general and why is it needed on the farm? If you were looking for a similar article, then you already know the answers to these questions.

But for those who stumbled upon it by accident, I will explain:

1. The equipment in question is table, the top of which is fixed with a system of springs or suspensions. A vibration motor is installed at the bottom of the platform, which, when turned on, makes it vibrate;

1. Concrete is poured into special forms, which in turn are installed on the countertop. The transmitted vibrations remove air bubbles from the solution, thereby increasing its strength properties..

Using this method at home, you can make:

• paving slabs;

• Eurofence sections;

• window sills;
• monuments;
• Foam blocks.

Such equipment can be purchased in the store. But its price is quite high, and for a one-time use it is unprofitable to carry out such an expensive purchase.

But to make a vibrating table for paving slabs with your own hands will not be very expensive. So, if you set out to economically, but at the same time beautifully and practically ennoble your suburban area, then further information will come in handy for you.

Process description

Any business should always begin with the preparation of the necessary materials and tools. Assembling a vibrating table with your own hands is no exception in this matter, so let's get started:

Step 1: Prepare everything you need

You will need a certain set of materials:

And you can't do without tools either:

In addition to the above, you, of course, also need vibrating table drawings, which can be found in abundance on the Internet. It is according to the scheme you like most that further assembly work will be carried out.

Stage 2: base frame assembly

Now we proceed directly to the manufacture of the vibrating table.

Let's start by assembling the base frame:

1. We cut the corner with the help of "grinder" into four parts in accordance with the data in the drawing diagram. Most often, these are segments of 700 mm, but depending on the volume of your planned work, you can choose any other sizes. That is, the more you need to produce, for example, the larger the machine should be;

Be sure to wear safety glasses before cutting, otherwise you risk getting scale in your eye.

1. The resulting we collect the fragments into a square or rectangle and weld them to each other welding machine.

If you do not have a welding machine or you do not know how to use it, then as an alternative, you can connect the segments with bolts, having previously drilled them in the right places. This design will be collapsible, but less rigid.

Stage number 3: installation of legs

How to make legs?

To do this, we proceed as follows:

1. We take profile pipes or a pipe, depending on how long it is, and we cut it again with the help of a “grinder” into four absolutely equal parts. It is very important that all supports have the same height, since the slightest slope to one of the sides will lead to pouring the mixture out of the mold during the operation of the vibrating table.

In addition, you also need to pay attention to:

• The vibration motor, which will be attached to the tabletop, did not touch the ground;
• The operator of the machine did not lean during its operation, but could perform all operations in the most convenient position for him;

1. The resulting We weld the segments to the corners of the frame made earlier;
2. Now it is necessary to solve the problem of stabilization of the structure.

Here you can go two ways:

• Dig small holes under the legs, install them there and concrete. Ideal stability in this case is guaranteed, but the machine will also turn out to be stationary. If you plan to work exclusively on your suburban area, then this is the best option;

• Weld round or rectangular pieces of metal to the edges of the supports increasing their area of ​​contact with the ground. In this case, then it would be nice to additionally connect the legs to each other at the bottom with crossbars from the remnants of the corner. The design will turn out not as motionless as in the previous version, but it will have mobility;

Stage number 4: tabletop assembly

This is the most crucial stage at which it is necessary to adhere to the following algorithm of actions:

1. Preparing the springs. I deliberately did not include them in the materials, as I wanted to separately give additional recommendations on them. After all, most owners will be puzzled by the question of where to get them. So, the best option is to go to the car market and buy moped springs or springs from car shock absorbers there;

1. We cut them in half and fix them on each corner of the base frame.. If it looks like an elongated rectangle, then one spring must also be fixed in the middle of the large sides.

This is done in one of three ways:

• Welded at both ends to the base and to the tabletop;
• They are welded at one end to the base, and special glasses are installed on the countertop, into which they are inserted a third of their length;
• They are welded at one end to the countertop, and special glasses are installed on the base, into which they are inserted a third of their length;

Instead of glasses, pins can be welded. In this case, the springs will not be inserted, but put on them, which is also suitable for the normal operation of the vibrating table.

1. We apply a vibration motor to the tabletop in a place corresponding to the drawing, and make marks through the mounting grooves. At the received points drill holes for bolts, with which we fasten the engine. To prevent the bolts from protruding from the outside, you can first weld a small metal box at the place where the vibrator is fixed;

For countertops, it is better to choose a steel sheet with sides. This will prevent molds from slipping off its surface in the future.

1. We weld or lay the countertop on top of the base with springs and get a homemade universal vibrating table, ready to use.

Conclusion

In the article, you got acquainted with what a vibrating table is for, and how to make it at home on your own. The video in this article contains some additional material related to this topic. Any questions that arise as you read, please ask in the comments.

What can be done to save your budget when arranging the site, paths in the garden and make a beautiful and convenient entrance to the garage? One option is a homemade vibrating table. With it, you can make tiles of different sizes and colors.

A vibrating table is a so-called countertop, which, under the influence of an electric motor, vibrates and leads to vibration of the mold with a tile mortar.

If you decide to produce tiles only for yourself, then the vibrating table can be made in small sizes so that it does not take up much space.

Standard parameters of the vibrating table

The optimal size of the working surface of the vibrating table is 600x600 centimeters. As a table frame, you can use improvised strong metal sheets or an old tabletop.

In any case, use such material so that after the final preparation of the tile, it is useful to you for other work and does not gather dust on the sidelines idle.

It should be noted that the quality of your tiles will directly depend on the materials from which it will be made. Therefore, we recommend that you carefully calculate everything.

The number of tiles obtained is the sum of the number of molds purchased as blanks for tiles. Immediately after manufacturing, you will not be able to pull the finished product out of the mold; it needs to lie down thoroughly in its mold for about 24 hours.

That is, if you buy 50 molds, you can produce no more than 50 tiles per day.

Production of vibrating tables

So, what initial tasks need to be solved before starting work on the manufacture of a vibrating table:

You must determine the optimal height of the vibrating table yourself, depending on your height and build, as comfortable work will add efficiency and productivity in the manufacture of tiles. A height of up to one meter is usually recommended.

After you have decided on the dimensions, we begin to assemble the vibrating table, it is usually mounted on four legs, which are used pipes, but just remember that they should be similar in size with springs. The springs should be loosely seated in the pipes at the height of a couple of coils.

Or, corners welded together into a frame are used as legs. But in this case, the springs will need to be connected to the frame by welding, or cut out small sections from the pipes and insert the springs into them, and weld the pipes themselves to the frame.

In any case, the vibrating table must stand stably, not stagger or fall on its side. Here you already decide what quality you want to make a table and how much money you are willing to invest in it.

If making a vibrating table is not included in your plans, and you want to make a tile with your own hands, then we recommend buying a vibrating table for tiles according to an ad on Avito.

Thus, you will save your time and immediately begin the process of making tiles.

The classic vibrating table has the following frame dimensions:

• Width 0.5 m;
• Length 1 m;
• Height 1 m.

Important advice: more is not better! Do not think that if you design a huge table, you will produce a large volume of tiles.

The larger the table, the more difficult it is to achieve uniform vibration with a conventional motor. In such a situation, you will have to spend money and buy a powerful vibration motor.

Vibrating table from car tires

An interesting solution was to make a table from used car tires. Any driver will have such material. And you do not have to look for pipes or metal corners.

To make this type of vibrating table, you will need 3 tires. Connect them together in four places with bolts. We attach the motor to the bottom cover of the table, exactly in the middle. Thus, your design will be stable.

Let's summarize.

We have given you a few examples of the manufacture of vibrating tables. All available tools that are in your garage can be used: tires, bolts, an electric motor, car springs, pipe sections and metal corners.

After making tiles, you can use your vibrating table for other purposes, for example, as a machine for sawing boards and other materials.

The amount of work performed depends only on you and the volume of forms that you will acquire for your work. Install the table at the optimal height for your height, this contributes to the comfort and speed of creating tiles.