What renovation to do in the bedroom. Bedroom renovation based on type: technology, design, functionality

The bedroom is the place where every member of the family rests after a long day. Ideally, repairs in the bedroom should be done every 2-3 years, but since the room is used only at night, its untidy state occurs much less frequently. Where does the repair of the bedroom begin and what work needs to be done we will tell our readers in more detail.

First steps for beginners

First you need to decide what kind of repair in the bedroom to be. Conventionally, according to costs and complexity, repair work can be divided into:

• Cosmetic - the easiest option that you can do with your own hands. On the material side, it is also less expensive, but there will be no global changes in the bedroom. You just need to paste the wallpaper and freshen up the ceiling.
• Capital - more labor- and materially costly. You will have to remove all the old finishes, level the ceilings, walls and floors and make repairs.
• Global - everything changes, including the style of the bedroom. Costly and difficult option. It is more profitable to invite a designer and hire an experienced team, as some design ideas require experience to implement.

When you have decided on the work, we will begin to prepare the room for repair.
Photos increase, click!

The first step is to remove the old wallpaper, ceiling and floor.

Important! Wallpaper is easier to remove after wetting them with water. Spray a small area of ​​the wall with a spray bottle and wait 10-15 minutes. The wallpaper should get wet and start to move away from the wall. With a spatula, they are easily removed.

The second step is to remove the paint from the ceiling, also with a spatula. This stage of work depends on which ceiling is supposed to be in your repair. If you decide to install a suspended or false ceiling, then there is no point in removing the old coating.

We do the same with the floor, if it changes, then it is better to remove the old one.

Wall and ceiling preparation

The surface of the bedroom must be leveled before repair. To do this, use putty, plaster, cement-sand mixture or GKL, GVL.

Important! To work with mixtures, you need to decide which surface of the walls. They are selected individually for the wooden, brick or concrete walls of the bedroom. You should not save on mixtures, as inexpensive, little-known compositions may be of poor quality.

For work you will need:

• roller;
• spatulas of different sizes;
• primer;
• putty;
• skins of various grain sizes.

Alignment is carried out in stages:

1. Beacons are installed over the entire surface using a level.
2. Cracks and irregularities are putty.
3. If the transition on the surface is more than 2 mm, then you need to use a cement-sand mixture for leveling. You can buy it ready-made (price from 120 rubles) or make it yourself (1 part of moisture-resistant cement + 2 parts of sand + water).
4. Let the putty dry and level the seams with sandpaper. Sanding will be more convenient with a small bar. A sheet of skin is wound on it and we work. Sanding is laborious and slow work. The quality of sanding depends on how smooth the walls of the bedroom will be.
5. Primer. The composition can be taken inexpensive, most importantly, choose in accordance with the material from which the walls and ceiling are made. The primer will strengthen the bond between the material and the plaster.
6. We apply the plaster with a roller and brush in hard-to-reach places. The bedroom walls are ready for painting or wallpapering.

You can finish the bedroom GKL or GVL. For this, a crate is made according to the level and sheets are attached.
The seams between the sheets are puttied and sanded. The walls are smoother with less effort and time.
But the crate captures part of the area, so the bedroom will become a little smaller.

Repair of the bedroom where to start in each case, the owner decides. You can prepare the bedroom for repairs with your own hands, but if there is no experience in the work, then we recommend hiring specialists. The price of work on average starts from 200 rubles / m2, but you don’t have to deal with alteration. Without experience, you can spend extra material, and time is money!

We look at thematic photos:

Video footage:

How to make a do-it-yourself bedroom renovation, informative, see.

A comfortable sleep and mood for the next day will depend on how the bedroom is equipped. If you're considering a bedroom renovation, check out how to create your own personal oasis of peace that will last for years. See how to make informed decisions when choosing materials and finishes. And the analysis of the real estimate will help to present the estimated cost of this event.

Bedroom renovation - planning

This room actually has many functions. This is a place to sleep, and a place to store things and, often, a study. Therefore, when starting a bedroom renovation, it is necessary to think over the elements of design, placement and functionality in advance.

What to look for:

• decide what size the bed will be and where it will be located in order to correctly place the sockets for the bedside tables.
• you should immediately clearly know where the TV will be - in order to install 4-5 sockets there, and bring the TV cable
• if there is a desktop, you also need a block of sockets with an Internet cable under it

What to do the ceiling in the bedroom

All of course subjective and depends on personal preferences. To get an overall picture, let's look at all the most common modern ceiling options during a bedroom renovation.

Plaster with painting

Here, in my personal opinion, just plain, white stucco ceilings with painting are the best option for a bedroom. I think the ceiling in the bedroom should not focus on itself. In addition, he must "breathe." Therefore, the use of several levels, highlights, glossy surfaces does not seem entirely appropriate for this room.

From drywall

The use of a plasterboard ceiling structure when repairing an apartment is justified in several cases:

• when there are overlapping defects that are not advisable to level with plaster
• when there is a desire to make several levels of the ceiling, build in fixtures, conduct communications behind them (electrics, ventilation)

Drywall construction can be combined with a stretch ceiling.

See photos of successful examples of plasterboard ceilings in the bedroom.

Stretch

A stretch ceiling is a stretched on an aluminum frame or a plastic profile, a canvas made of vinyl film (PVC) or fabric.

Since this material is newer than the previous versions, I will dwell on it in more detail.

From user reviews follow such advantages and disadvantages of stretch ceilings

Advantages of stretch ceilings

• Subjectively like the view
• Durability (30 years or more)
• Creates a perfectly smooth surface
• Quickly mounted
• Glossy, visually increase the height of the room
• Cope with flooding from above (hold water)

Cons of stretch ceilings

• Road
• The first time there is a smell
• Seam - width of PVC tape (European) up to 2.7 m., if necessary, it is welded
• Chandeliers must be selected with reflectors
• Afraid of sharp objects

• If you decide to mount a stretch ceiling - take only high-quality material and normal installers;
• If the smell does not disappear for more than a week, then call the masters - let them change the film
• Check material certificates (fire and hygienic). There you can also see the country of the material manufacturer.
• The more corners and arcuate bends, the more expensive the stretch ceiling will be (30 percent)
• Matte PVC ceilings are more versatile for interior use.

View selected photos of the stretch ceiling in the bedroom

Walls in the bedroom decoration and decoration

• Light colors expand the space, dark colors do the opposite.
• Natural and natural colors are preferred
• More than 5-6 different colors in the room should not be used, a variegated effect will be created. This does not apply to shades of the same color - they can be used without restrictions.
• The more colors you use, the softer they should be.
• In order to choose the best interaction of colors with each other (including the interaction of walls with furniture, curtains, etc.) - use the color calculator

Consider color combinations such as in the photo:

What to do the floor in the bedroom

The load on the floor in the bedroom is low (significantly lower, for example, than in the hallway or kitchen), so there is no need to use the hardest flooring (tiles, laminate). Take a closer look at such natural coatings as cork board and parquet - they will add comfort.

What to look for when choosing coverage

• parquet is of course preferable to parquet board
• the parquet board may be prone to scratches. It is relevant when the family has small children or pets.
• hardwood flooring is better (ash, Canadian maple, oak)
• if a cork board, then only glued (not castle) and under varnish
• underfloor heating only makes sense during short periods of the off-season. The rest of the time in the bedroom it is not particularly used.

Dark floor or light

• The main disadvantage of a dark floor is that it is less practical than a light one.
• The main advantage of a dark floor is that it looks (subjectively) more beautiful.
• If the floor is dark, then it is not monotonous. To make the mote less visible. Better even with light variegation.
• Also with a dark floor, a robot vacuum cleaner has proven itself well.

After re-reading the forums, I can say that the reviews about the dark field are much worse. That is, people made one for themselves and many regretted it. Mainly due to the fact that any contamination (dust, crumbs, wool, stains) is easily noticeable on it, and therefore it is necessary to wash it often.

dark floor example

light floor example

The bedroom is a two-faced and even many-sided room. In the bedroom, functionality, aesthetics and psychophysiology are closely intertwined. When repairing a bedroom, respectively - technical and design techniques. Therefore, when starting a do-it-yourself bedroom renovation, you need to carefully consider all its stages, based on the type of bedroom, the degree and nature of its use, and even before starting work, imagine exactly what the renovated room will look like.

We will try to help the reader in this. For the bedroom, the choice of finishing materials is of particular importance, so enough attention will be paid to it. But all other types and stages of repair will also be covered properly. We will also try to give recommendations on how to make an inexpensive repair of a bedroom of any kind.

Bedroom types

Bedrooms can be divided into the following categories according to the totality of signs:

1. Parental (matrimonial) bedroom;
2. Children bedroom;
3. Bachelor's bedroom;
4. Bedroom in a one-room apartment (odnushka).

All types of bedrooms can be either simple in plan or with an alcove - a wall niche for a bed, with or without a balcony. Let's take it in order; bedrooms of couples or groups adhering to, so to speak, the exotic nature of the relationship, we do not touch.

matrimonial

Parents in the bedroom, since they have children, not only sleep. Perhaps they don’t sleep so much, but this is a matter of temperament, and from the point of view of the spouses in the bedroom, you need to create the required mood at the right moment. Transforming houses that capture the thoughts of their inhabitants so far exist only in science fiction, but modern construction and design technologies provide the necessary set of tools to create the desired psychedelic effect, and this can be achieved with your own hands and inexpensively.

Children's

In families for whom renovation is a problem and a reason for reflection, the children's bedroom and the children's room are one and the same. There are many questions here, especially if the kids have to share one room, so the nursery is the subject of a separate description.

Bachelor

As the unforgettable Lelik put it in The Diamond Hand, there is no married man who would not dream of being a bachelor for at least an hour. That is, in the life of bachelors there are romantic moments and they are visited by ladies. Hence, the same requirements as for the matrimonial bedroom, and in addition, bachelors rarely live in spacious multi-room apartments, so the bachelor’s bedroom should “be able” to transform into a recreation area or study, and again inexpensively and, if possible, with your own hands.

Single bedroom

One-room apartments are occupied not only by bachelors. A family living in a one-room apartment is also not uncommon, so the “one-room” bedroom is one in all forms: it is a marital, children's, and dining room. Oddly enough, to combine all this for 26-30 square meters. m with your own hands is still possible, and living together in such an apartment can be even more convenient than in a stupidly furnished three-room apartment.

Video: bedroom design basics

Repair types

By the degree of increasing complexity of the type of repair of bedrooms, you can specify the following:

• cosmetic repairs, it is simple;
• decorative;
• capital;
• renovation;
• redevelopment renovation.

Redecorating

Cosmetic repairs come down to cleaning the room, replacing a window or balcony block, and. In preparation for it, the main thing is the choice of wallpaper and new furniture, which will be discussed later. The laying of a new one-piece flexible flooring over the existing one, without repairing the floor, replacement of curtains, suspension of a lambrequin, installation of screens are also included in the cosmetic repairs.

Decorative renovation

Decorative repairs are already more difficult: in addition to the above, in its course a new ceiling is arranged, walls are refinished, and the floor is re-laid. Perhaps the balcony is insulated and produced. Decorative repair of the bedroom is already quite complicated, but still quite doable on our own. The device of light partitions made of PGB (tongue-and-groove blocks), GVL (drywall), plywood or lumber also applies to decorative repairs.

Overhaul

Overhaul of the bedroom, like any other room, includes a complete cleaning of the room, drying it, overhaul of the ceiling and walls with their insulation, overhaul of the floor with the replacement of the screed, its sealing, insulation and vapor barrier. The technology and methods of work are the same as for other rooms, and in terms of complexity and laboriousness, major repairs are available only to the most skilled home craftsmen.

"Eurorepair"

Renovation - the concept is quite general and does not at all boil down to continuous sheathing with clapboard and the installation of PVC windows. Renovation is primarily a style, creating a unique look of the bedroom, expressing the individuality of its owner (owners). Renovation is possible of any kind, including cosmetic, but it requires either a developed artistic taste and knowledge of the relevant methods of work, or the advice of an experienced designer. In any case, renovation will cost much more than usual.

Repair with redevelopment

Repair with redevelopment is most often the installation of heavy capital partitions, giving a large concentrated load on the ceilings (brick, etc.), as well as a device in the bedroom. It requires the development of a project, a special permit for work with complex documentation, professional technical supervision of the work, their acceptance with confirmation by an act. For implementation, the experience of a builder is necessary, with the ability to make technical calculations and knowledge of SNiP, therefore repairs with redevelopment are independently carried out in exceptional cases.

Note: in any bedroom there should be a boudoir corner: a dressing table, an ottoman, a chest of drawers or a closet-pencil case. In a bachelor's bedroom, a secretary perfectly combines the functions of a boudoir and a desktop with a mirror in its niche.

Light and air

An ideal bedroom renovation should not only make it cozy and change according to the intentions of the person(s) who entered. The patient, after all, also lies in the bedroom, and perfectly healthy people stay there for a long time while they sleep. Therefore, the hygiene of the bedroom is no less important than the bathroom or kitchen.

But deodorants are not used in the bedroom, and it is impossible to arrange enhanced ventilation: during sleep it is easy to catch a cold even with additional heating. The hygiene of the bedroom should be achieved by the most natural, unconstrained means.

Light

The main factor in the disinfection of the bedroom is natural light. For comparison: such a dangerous microorganism as pale triponema survives up to several hours in a dark room in the open air, up to 20 minutes with diffused medium strength light, and dies instantly under direct sunlight from a window. Therefore, the window in the bedroom should be larger, and in the bedroom facing the shady side - with continuous glazing, as in the figure.

Further, natural light should be distributed as evenly as possible over the volume of the room, and it should be possible to dim it if necessary. The first is achieved by the lightest possible finish of the walls and ceiling and large mirrors located in places of the most intense illumination by direct rays. Light vertical rotary blinds, Japanese curtains, shiny plasterboard (see below) and a stretch ceiling allow you to redirect the light from the window, without greatly reducing its overall intensity.

Air

Inconspicuous, but quite effective air circulation in the bedroom is provided by "breathing" walls, properly plastered and pasted over with properly selected, see below, wallpaper. Firstly, at night, such walls absorb the fumes and exhaust air of the sleeping people, and during the day, when the bedroom is mostly empty, they are gradually emitted, and natural ventilation removes them.

Secondly, in a properly finished bedroom, the well-known “open bottle effect” has the opposite effect: dust does not settle in the room, but is imperceptibly swept out of it. For this, in addition to proper wall decoration, a dust-free ceiling and a properly selected floor covering are required. A warm floor gives a huge effect on hygiene and comfort in the bedroom, but its installation is a difficult, time-consuming job, it requires the complete removal of the old screed and the formation of a new one, which is tantamount to a major overhaul of the floor.

Note: the question arises - how to combine light and soft wall decoration with the requirements of increased wear resistance of their lower part? And at the bottom of the wall should be dense, smooth, not dirty and not dirty?

• The simplest solution is to finish to a height of about 80 cm with drywall on the frame and paint it with acrylic enamel or stick it with a self-adhesive film.
• More complicated and more expensive - wood paneling. All these materials also “breathe”, and absorb light a little. But plastic sheathing should be avoided: it is “deaf” in the air.

Technological methods

The technology and sequence of complete repairs in the bedroom are no different from those for other rooms:

1. Cleaning the ceiling and walls; drying out the room.
2. Dismantling of the old floor covering.
3. Repair of the basic surfaces of the ceiling, walls.
4. Floor repair and underfloor heating.
5. Electrical wiring.
6. Plastering works.
7. Suspended ceiling device.
8. Floor covering.
9. Wallpapering and decorating.

A simple bedroom renovation, of course, does not include all of these stages and not all operations at each stage. But in order to decide what needs to be done and what not, you need to have a complete understanding of the repair.

Cleaning and drying

Cleaning of the premises is carried out after wetting the old plaster with water and holding for a day with a metal spatula; the remains are removed with a drill with a cord brush. Surface cleaning for whitewashing and painting is done with an abrasive mesh on a flat bar. The old wooden flooring is removed with a pry bar or crowbar and carpenter's tongs with a nail puller. The tiling is knocked down with a puncher with a chisel, they also remove the unusable screed during the overhaul of the floor.

Before starting the basic repair, the damp room must be dried. The need for drying is determined by a piece of film in 1 sq. m, laid on the floor and tightly pressed along the edges: if no condensation has formed under it during the day, it is not necessary to dry it. Dry with a fan heater or industrial hair dryer, with a slight excess of moisture. To speed up drying, you can spread silica gel in cloth bags in the room, but in no case scatter it!

Basic surface repair

During the basic repair of the ceiling and walls, rusts are foamed in layers - the seams between the plates. The thickness of one layer is 3-4 cm. Foam with a gun with a thin long nose until the channels between the plates are filled.

To determine the necessary degree of repair of the floor, its revision is first carried out. In the presence of intersecting or gaping cracks located along the perimeter, more than 2 mm wide, cracks are necessary. Separate cracks are sawn with a grinder 50-70 mm deep, dust-free, treated with a deep penetration primer on concrete and sealed with a thixotropic compound, having previously inserted marker studs. After the thixotrope has hardened, the markers are removed, the seam is sawn again with a grinder, a damper cord is placed in it and filled with silicone sealant. Small potholes are sealed with a cement-sand mortar; tubercles are removed with a grinder with a bowl-shaped circle on concrete.

The second option for partial repair of the base floor is dust removal, impregnation with a “deep” primer, sealing cracks with silicone and a 10-20 mm base. The bulk composition is kneaded immediately over the entire floor area with a perforator with a mixer; pouring the floor in parts is avoided even by experienced professionals. The poured composition is leveled with a mop and rolled with a special needle roller. It is possible to fill on top with another polymeric liquid self-leveling floor by 7-10 mm. It simplifies flooring and provides additional insulation, but is expensive.

Floor overhaul

Overhaul of the floor, in addition to its poor condition, is necessary when installing a warm floor and hidden laying of heating wiring. First, a hydro- and vapor barrier is applied to the dried floor surface from a special film (hydrostop, etc.) with a twist on the walls of 25-30 cm, without cuts. Then: in usual cases with expanded clay; under a warm floor - special fibrous mats with increased bearing capacity or foam concrete. In the first case, the layer is at least 20 mm; in the second - from 60-80 mm.

Next, plaster beacons are laid in increments of 600-800 mm and the screed is made with a very viscous, “dry” cement-sand mortar. Knead it in portions of 10-30 liters with a perforator or drill with a mixer. Portions are successively dumped between the lighthouses and leveled with a wide rule over the lighthouses. You can walk on the screed in a day, but before laying the floor, it must stand for at least 40 days.

And have certain skills in this area. Before embarking on this difficult, but truly aesthetic process, be sure to determine the functionality of the room so that it is easier for you to draw up a project.

If you want to see examples of high-quality bedroom renovation, photos are shown in our gallery.

What to consider when drafting a project?

Before you make a bedroom renovation, draw up its project. This can be done using a special computer program, but if you do not have the skills to work with it, just draw the layout of the room on a piece of paper.

The project should begin with determining the location of the bed. Decide in advance on the width and design of the bed. Remember that these parameters affect what other furniture attributes will be located in the bedroom.

Bedroom renovation design in the photo was made using a simple computer program

Be sure to plan your bedroom in such a way that access to the bed is free. If two people live in the room, it is advisable to make convenient approaches to the sleeping place from two sides.

Photo of a bedroom renovation with a comfortable approach to the bed

The bedroom project should also include the location of the remaining furniture and large decor details. It should also be noted on the electrical wiring diagram if you are planning a major, rather than a redecoration of the bedroom with the replacement of wiring.

What style to choose?

Bedroom renovations can be done in different styles. Several factors influence the choice of design direction, but the most important ones are the area of ​​\u200b\u200bthe room and the personal preferences of the apartment owners.

What style to use for a room with a small square

Where to start renovating a bedroom? Of course, with the decoration of the ceiling. Regardless of whether you plan to level it, plaster, paint or stretch it, you should always start with it.

Bedroom renovation, design, real photo demonstrates the installation of a stretch ceiling

European-quality repair of the bedroom, in the photo the room is completely ready for operation

Tips and tricks for renovations in small and narrow spaces

Creating a beautiful and functional interior can be difficult if the bedroom area is small. Most often, small rooms arise as a result of redevelopment in an apartment or house, for example, after expanding the living room. The bedrooms in Khrushchev also differ in a small area. In these cases, the repair, as well as the choice of design, requires a special approach. If you want to see a beautiful and competent repair in a small bedroom, photos are waiting for you in our gallery.

The most successful options for finishing small rooms in Khrushchev

Small rooms in Khrushchev (3 by 3 or 3 by 4 m) should be decorated in bright colors and contain a minimum of furniture. The ceiling in such a room is better to paint or make a stretch. Plasterboard construction can make the room lower and visually smaller, which means that it is best to refuse to use it.

Repair of a bedroom in Khrushchev, in the photo is an example of the original stretch ceiling

Photo-renovation ideas for a narrow bedroom, interior decoration made in Japanese style

Do not forget about the main rule of repairing narrow spaces. The main accents should be used on short walls, and try to make long ones less noticeable. By accents, we mean a brighter wallpaper or carpet, if its use is allowed by the style. A small wall can be pasted over with bright photo wallpaper.

Wallpaper with a large pattern in a narrow room is the main accent of the room

Bedrooms are being renovated when you want to update the interior that has become familiar to the eye. People spend a considerable part of their lives in rooms, so everyone wants to make it cozy. That is why, before starting the planned work, it is necessary to choose the optimal design, from the point of view of a person. Photos of ready-made options or a designer's consultation will help in this. Regardless of the chosen method, everything must first be carefully thought out, otherwise unforeseen expenses cannot be avoided.

It is recommended to consider various design options in advance. To do this, you will need furniture or thematic catalogs. It would not be superfluous to make a sketch that will help you see in advance how exactly this or that detail fits into the interior. It is desirable to take part at this stage in the size of the room, the degree of its illumination and the predominant color range.

Increased attention is paid to the issue of zoning available areas. For example, if we are talking about the design of bedrooms, then it is done in isolation from other rooms. On the one hand, every centimeter of the area must be rationally used, without overloading the interior. On the other hand, if there is enough space in the room, a wardrobe or workplace is arranged.

The next steps are as follows:

1. Drawing up a work estimate - the more accurately the materials necessary for repairs are taken into account, the easier it is to decide on a financial issue. Beginners can use specialized computer programs. We do this in order to simplify the whole process, because they allow, based on the parameters entered, to see an approximate estimate;
2. Preparation of the future place of work - in order to make it convenient to carry out the necessary manipulations in the room, all furniture and appliances should be removed from it. In cases where the project does not provide for the replacement of windows and doors in the room, they should first be protected from accidental damage, dust and possible ingress of paint. For this, a special film is used, which can be bought at a building materials store;
3. Removal of old structures and coatings - in most cases, we are talking about unnecessary wallpaper, whitewash, tile or paint. This step takes a lot of time and requires extra care. The real difficulties begin at the stage of removing the plinth and threshold.

Bedroom renovation options: wall and ceiling decoration

In order for the bedroom to be transformed, you need to pay close attention to the walls and ceiling. When it comes to the ceiling, you can change its appearance with the help of: puttying, installing a stretch or plasterboard option. The first way is to wisely use sufficient building experience for people, otherwise many mistakes cannot be avoided. It's easier to work with drywall.

Firstly, they even out almost all surface irregularities, and, secondly, they allow you to hide unsightly communications with your own hands. Among other advantages, versatility stands out - the ability to use in the interior, regardless of its characteristics. If the design of the room provides for the use of a multi-level ceiling, then it is recommended to use drywall or stretch ceilings.

No less attention should be paid to the issue of transforming the walls:

• Drywall refers to inexpensive and simple ways to hide all surface irregularities;
• If there is no desire to visually reduce the space in the room, the choice must be made in favor of plaster;
• Fine finishing is carried out using wallpaper and decorative plaster;
• Various types of finishes will help to study photos in thematic press.

Where to start repairs in the bedroom: you also need to look under your feet

A beautiful floor in a room should not be cold tones. A similar requirement applies to its temperature. To fully experience the benefits of a well-insulated floor option, the “warm floor” system will help. If there are no financial opportunities for its installation, then several common types of materials will help to make a comfortable option. Opens the list of laminate, amenable to easy installation even by not very experienced people.

After installation, it does not require special care - in addition, a good designer will offer a number of other options:

1. Linoleum- a budget option for flooring. For decades, furniture was placed on it that could not harm linoleum. If from a functional point of view, the material confidently outperformed competitors, then from an aesthetic point of view, it left much to be desired;
2. Bulk floor- creates a perfectly flat surface with minimal time. Other advantages include the ability to create a floor in 3D pictures;
3. Suberic floor- environmentally friendly and pleasant to the touch coating. His only mine is a ban on the use of aggressive chemical cleaners;
4. Parquet-requires increased attention to itself in terms of care. At the same time, it allows you to create a designer floor. A significant drawback of the material is its high cost.

It is more correct to start with redevelopment, which involves the dismantling of individual elements. Similarly, it is necessary to do when it comes to zoning space using partitions. In addition, at the redevelopment stage, heating batteries are replaced, an air conditioner is installed, electrical wiring is installed or reconfigured, and new double-glazed windows are installed.

Finishing material - is selected taking into account the aesthetic and environmental factors. A phased work plan must take this aspect into account. The absence of dangerous dyes and other not always safe elements will positively affect the health of the inhabitants of the room. If we talk about the window system, then the tree must be abandoned due to its inability to pass the air flow in the required volume. The wrong microclimate will not have the best effect on the quality of indoor air.

In addition, it must be remembered that the apartment requires high-quality sound insulation. Only plastic windows will cope with this task. In doing so, one point must be remembered. If people with allergies live in the house, then plastic windows should be abandoned. The same requirement applies to doors. They are mistakenly perceived as a monolithic obstacle designed to protect the inhabitants of the room from a military invasion.

• The focus is on functional furniture with a large number of retractable elements;
• Visually a small bedroom will be expanded by a corner wardrobe with glass sliding panels;
• In rooms with extraordinary geometry, it is better to use 2-3 noticeable visual accents. As such, a designer wardrobe or a picture will act;
• Whichever finish option is chosen, it is necessary to exclude excessive cluttering of the space with furniture.

Carrying out repairs in the premises is not an easy task, requiring good preparation. When making a sketch, the architectural features of the room where it is planned to change the situation are taken into account. Furniture, windows and doors are selected according to the preferred style in the interior. After the approval of the estimate, the transformation of the premises begins. The main thing is to strike a balance between the degree of workload of the available space and the desired result.

Examples of bedroom renovations (photos of interiors)