Bavaria house in a new configuration summer. Bavaria - a project of a house made of glued laminated timber

Equipment Basic

• Foundation: without foundation
• Floors of the 1st floor: floor logs 40x150mm, draft floors - OSB 3 - 6 mm, insulation - 50mm for wind and waterproofing, flooring - floor board 21mm for vapor barrier.
• External walls of the 1st floor: frame - 40x150mm, insulation - 150mm, lining lining 12.5mm, outside for wind and hydro protection, inside for vapor barrier.
• Partitions of the first floor and attic: frame 40x100mm, not insulated, sheathing lining 12.5mm, vapor barrier on both sides.
• Overlappings of the 1st floor: floor beams - 40x150mm, ceiling filing - lining 12.5mm, flooring - floor board 21mm for vapor barrier, insulation - 50mm.
• Attic: frame - 40x100mm, not insulated, sheathing lining 12.5mm, outside for wind and hydroprotection, inside for vapor barrier.
• Rafter system, roofing: rafter - 40x100mm, hemming of the attic ceiling - lining 12.5mm for vapor barrier, not insulated. Roof - galvanized profiled steel, 20mm crate for windproofing.
• Window: wooden, with double-row glazing and single-circuit sealant.
• Low tides: installation of drainage systems under windows and along the perimeter of the foundation
• Doors: entrance, internal - wooden paneled.
• Stairs:
• Porch: without foundation, floor logs - 40x150mm, flooring - p / m planed 21 mm, side railing - carpentry profiles, ceiling filing - lining 12.5mm, roof - galvanized profiled steel, crate 20mm.

Price - 1,030,000 rubles

Complete set "Country house"

• - FOR A PRESENT!
• Ground floor floors: floor logs 40x150mm, rough floors - OSB 3 - 6 mm, insulation 150mm, flooring - floor board 35mm
• Walls of the 1st floor:
• Floor coverings on the first floor:
• Attic: frame - 40x100mm, insulation - 100mm.
• Finish: external - lining 12.5 mm for wind and hydroprotection, internal - lining 12.5 mm for vapor barrier.
• Rafter system, roofing: rafter - 40x100mm, roof - galvanized, profiled steel, including the porch.
• Window: wooden, with a double-glazed window, a set "Country" (P 42).
• Low tides: installation of galvanized drainage under the windows and along the perimeter of the foundation.
• Doors:
• Stairs: attic staircase - made of planed lumber, with balusters, with a railing turnstile in the attic. Entrance - attached, temporary.
• Porch: size 1250x2500 mm.
• The house is intended for living in the period - early spring - late autumn.

Price - 1,133,000 rubles

Complete set "Warm house"

• Foundation: screw, pile 108x2500mm(including porch), timber framing - FOR A PRESENT!
• Treatment:
• Ground floor floors: floor logs 40x150mm, rough floors - OSB 3 - 6 mm, insulation 150mm, flooring - floor board 35mm.
• Walls of the 1st floor: frame - 40x150mm, insulation - 150mm.
• Floor coverings on the first floor: floor beams - 40x150mm, flooring - floor board 21mm for vapor barrier, insulation - 50mm.
• Attic: frame - 40x150mm, insulation - 150mm.
• Finish: external - lining 12.5 mm for wind and hydroprotection, internal - lining 12 mm for vapor barrier.
• Rafter system, roofing: rafter - 40x150mm, roof - galvanized, profiled steel, including the porch.
• Windows: wooden, with double-glazed windows, set "Winter" (P 65)- FOR A PRESENT!
• Low tides: installation of galvanized drainage under the windows and along the perimeter of the foundation in the color of the roof.
• Doors: entrance and internal - wooden paneled.
• Stairs: attic staircase - made of planed lumber, with balusters, with a railing turnstile in the attic. Entrance - attached, temporary.
• Porch: size 1250x2500 mm.
• The price includes: installation of a house and 100 km of delivery from production (Moscow Region, Voskresensky district, Beloozersky village).
• The Berest company uses only a dry framework.

Price - 1,303,000 rubles

Complete set "Turnkey house"

• Foundation: screw, pile 108x2500mm(including porch), timber framing - FOR A PRESENT!
• Treatment: bioprotection of the lower harness, cranial bar, floor log in 2 layers, on four sides.
• Ground floor floors: floor logs 40x150mm, rough floors - OSB 3 - 6 mm, insulation 150mm, flooring - floor board 35mm.
• Walls of the 1st floor: frame - 40x150mm, insulation - 150mm .
• Floor coverings on the first floor: floor beams - 40x150mm, flooring - floor board 35mm for vapor barrier, insulation - 50mm.
• Attic: frame - 40x150mm, insulation - 150mm.
• Finishing: external - SAYGA siding according to OSB-3 9mm - AS A GIFT! for wind and hydroprotection, internal - lining 12.5 mm for vapor barrier.
• Rafter system, roofing: rafter - 40x150mm, roofing - metal tiles - FOR A PRESENT!
• Window: wooden, with double-glazed window, set "Winter" (P 65) - FOR A PRESENT!
• Low tides: installation of drainage under the windows and along the perimeter of the foundation in the color of the roof.
• Doors: entrance and internal - wooden paneled.
• Stairs: attic staircase - made of planed lumber, with balusters, with a railing turnstile in the attic. Entrance - attached, temporary.
• Ventilation: bathroom ventilation device, with a passage element on the roof.
• Porch: size 1250x2500 mm.
• The house is designed for year-round use.
• The price includes: installation of a house and 100 km of delivery from production (Moscow Region, Voskresensky district, Beloozersky village).
• The Berest company uses only a dry framework.

div > .uk-panel", row:true)" data-uk-grid-margin="">

Equipment

Each project is completed individually, as technical solutions depend on the place of construction, and finishing and equipment - on the wishes of the client. The following characteristics can be considered as a starting point:

Foundation

Optimal for most conditions, the foundation is a shallow reinforced grillage. Compacted sand underlay 300 mm, minimum depth of the concrete part 200 mm, from 6 reinforcement axes 12 mm.

Options:

• Slab on the grillage (Monolithic reinforced concrete basement slab)
• UShP (Insulated Swedish plate)
• Slab on piles (for areas with a close groundwater level)

wall kit

For our projects, we use glued beams with a wall thickness of 202 or 242 mm.

Section options

• Standard: 202x190(h)mm, 242x190(h)mm
• Cabin (premium): 202x240(h)mm, 242x240(h)mm (with solid louvre)
• Cabin (high): 202x270 (h) mm, 242x270 (h) mm (with checkerboard plywood)

Roof

Any type of roof is suitable for wooden houses. The choice of finishing material depends on the angle of the roof, the presence of trees near the house and the aesthetic preferences of the client. As a starting point, you can consider a soft roof of American or Finnish manufacturers with 200 mm insulation, snow retention and a metal gutter system.

Options

• Soft roof
• Cement-sand tiles
• Falz
• natural tile
• Metal tile (should take into account the noise of this coating during rain and temperature changes).

Edit project

We specialize in custom design. This project, like all others, was developed based on the wishes of a particular customer and serves as a demonstration of the capabilities of our architectural bureau. You can leave it as it is, or choose it as a starting point to create your own custom project.

How are our homes different?
from the rest?

• Your home will be warm

  We guarantee that the house built according to our project will be warm. Our houses fully comply with SNiP. “Incorrect” bay windows, balconies, extra cuts in the walls and some other elements can also lead to heat leaks. But the main reason for heat loss is blowing through the walls due to an incorrect profile of the longitudinal groove on a log or beam, or due to unprofessional assembly. We make sure our homes are warm.

• We make changes to the project for free

  Most clients ask to make their own changes to the project: add or remove a boiler room, a terrace, a "second light", an extra bedroom, windows, increase or decrease the premises. We are happy to implement the wishes of customers in the project. But we can also refuse changes if they do not comply with the current SNiPs or the rules of wooden housing construction or may lead to an increase in the cost of construction. We make all changes to the project free of charge.

• You save on construction up to 200,000 rubles.

  With our project, you are guaranteed to save on building a house - up to 200,000 rubles when building a 200-meter house.

• The placement of engineering networks is already thought out

  In our projects, the placement of engineering networks is thought out. If this is not done in advance, then you will have to use equipment of non-standard sizes, which usually costs more. Or you will need to install additional boxes in a visible place and their subsequent decoration.

• Optimal arrangement of furniture

  Our projects include a competent arrangement of furniture. This eliminates errors in planning the size of rooms, the location of window and door openings. If this is not done when designing, then, for example, due to improper placement of a door or window, you will not have enough 10-30 centimeters to locate plumbing fixtures, cabinets or kitchen drawers.

• We build houses

  We not only create projects, but also build houses. Each project presented on our website has been built by us many times. Our architects visit built houses and see “not on paper” the result of their work. We also receive feedback from the owners of houses built according to our projects, take into account their wishes and make changes to standard projects. Thus, we can say with confidence that our projects have been tested by time and repeated construction, they are comfortable for living and economical.

• Optimal cutting of a 6-meter log

  For the production of a log house, 6-meter logs are used. Logs are cut into elements. When cutting, waste remains, which can reach up to 20% of the total volume of wood. We design the house and the dimensions of the premises in such a way that the cutting of a 6-meter log is optimal, and waste tends to zero. This allows you to significantly reduce the cost of the log house. Therefore, the exact dimensions of the premises are very important, and changing the size even by 20 cm can lead to a large waste, and, consequently, a rise in price.

How are our homes different?
from the rest?

• Your home will be warm

  We guarantee that the house built according to our project will be warm. Our houses fully comply with SNiP. “Incorrect” bay windows, balconies, extra cuts in the walls and some other elements can also lead to heat leaks. But the main reason for heat loss is blowing through the walls due to an incorrect profile of the longitudinal groove on a log or beam, or due to unprofessional assembly. We make sure our homes are warm.

• We make changes to the project for free

  Most clients ask to make their own changes to the project: add or remove a boiler room, a terrace, a "second light", an extra bedroom, windows, increase or decrease the premises. We are happy to implement the wishes of customers in the project. But we can also refuse changes if they do not comply with the current SNiPs or the rules of wooden housing construction or may lead to an increase in the cost of construction. We make all changes to the project free of charge.

• You save on construction up to 200,000 rubles.

  With our project, you are guaranteed to save on building a house - up to 200,000 rubles when building a 200-meter house.

• The placement of engineering networks is already thought out

  In our projects, the placement of engineering networks is thought out. If this is not done in advance, then you will have to use equipment of non-standard sizes, which usually costs more. Or you will need to install additional boxes in a visible place and their subsequent decoration.

• Optimal arrangement of furniture

  Our projects include a competent arrangement of furniture. This eliminates errors in planning the size of rooms, the location of window and door openings. If this is not done when designing, then, for example, due to improper placement of a door or window, you will not have enough 10-30 centimeters to locate plumbing fixtures, cabinets or kitchen drawers.

• We build houses

  We not only create projects, but also build houses. Each project presented on our website has been built by us many times. Our architects visit built houses and see “not on paper” the result of their work. We also receive feedback from the owners of houses built according to our projects, take into account their wishes and make changes to standard projects. Thus, we can say with confidence that our projects have been tested by time and repeated construction, they are comfortable for living and economical.

• Optimal cutting of a 6-meter log

  For the production of a log house, 6-meter logs are used. Logs are cut into elements. When cutting, waste remains, which can reach up to 20% of the total volume of wood. We design the house and the dimensions of the premises in such a way that the cutting of a 6-meter log is optimal, and waste tends to zero. This allows you to significantly reduce the cost of the log house. Therefore, the exact dimensions of the premises are very important, and changing the size even by 20 cm can lead to a large waste, and, consequently, a rise in price.