DIY metal gates. Do-it-yourself swing gates Make a drawing of a gate with a wicket

Acquaintance with the house begins from the gate. Essentially, this is the owners’ business card. Therefore, their appearance should, by definition, be solid and beautiful. But, at the same time, their main purpose is to ensure the safety and security of private country houses and dachas.

How to combine these two purposes together? How to make swing gates for your dacha beautiful, reliable and functional. What types of swing gates are there and which ones are better to choose? How to make and install. There are detailed step-by-step instructions about all this in our article.

Before we move on to describing the process of installing gates, we will focus on their pros and cons.

Advantages of swing gates:

• simple design;
• relatively low price;
• undemanding in maintenance;
• long service life;
• strength;
• ease of operation;
• unlimited choice of design solutions and shapes;
• no need for concreting the site. For example, under the rollers for;
• possibility to install automation.

Flaws:

• the need to provide quite a lot of space for opening and closing;
• the need to take into account the wind load in the region.

Simple arithmetic shows that swing gates have significantly more advantages. And the shortcomings are removable or not critical. The long history of their existence only confirms the reliability of the system.

Swing gate design

No matter what materials appear, no matter how the fashion for decorating gates changes, the basic principle of their arrangement remains unchanged. Structural device:

• pillars (racks). In fact, they are not gates, but they are supports for their fastening;

• frame for swing gates. Wood or metal can be used in its manufacture. The latter is more popular because gives the frame greater rigidity;

• finishing (cladding) material for cladding;

• loops;

• latches and locks.

So, we have decided what swing gates are and what features they differ from.

Making swing gates - tools and materials

Having made sure that we can make them ourselves, we will begin construction.

The required tool for making swing gates and consumables for it.

Tool

Mandatory for the manufacture of the frame and arrangement of racks:

• Bulgarian. Designed for cutting and grinding metal workpieces;
• threaded discs;
• grinding discs;
• welding machine;
• electrodes;
• roulette;
• building level;
• corner;
• hammer;
• shovel;
• Master OK.

Auxiliary:

• compressor, spray gun or brushes for painting racks and/or gates;
• drill. If necessary for fastening the gate trim;
• rivet, as well as rivets for it.

Material

• pipe for making a frame. It is preferable to use a profile pipe 60x40x1.5. 40x20x1.5 will also do. The final choice depends on the finishing material and taking into account the wind load;

• pipe for making racks. Here you should also be guided by the weight of the finished gate.

1. gate weight is within 150 kg. and below. A pipe 80x80x4 is suitable;
2. gate weight from 150 kg to 300 kg. Pipe - 10x100x5;
3. The weight of the gate exceeds 300 kg. Pipe -140x104x5.

Tip: You can use brick, concrete or even wood for the racks. In any case, correlate the properties of the material with the expected load.

• hinges for swing gates. They can be adjustable or unregulated. Must be made of high-quality material and be able to withstand significant loads;

• locks. Can be mechanical or electromechanical. The choice is discretionary;

• dye. Needed for painting racks and/or trim;

• sheathing There is also complete freedom of choice here. The main thing is that it is to your liking and affordable;

• automation for swing gates. To be able to make automatic gates. You can not install it at all or install it later. But, if its installation is expected, even in the distant future, it is better to make the frame of the swing gates more durable.

How to make swing gates with your own hands

Do not think that homemade is a synonym for the words “ugly” and “unreliable”. Quite the opposite - homemade swing gates mean creativity, individuality and concern for your own safety.

Sequence of work.

1. stage - installation of racks for hanging gates.
2. stage - manufacturing swing gates.

The stages, of course, can be changed. But the installed racks (posts for swing gates) must last at least a week. In order not to prolong the pleasure, the waiting time can be occupied by welding the gate.

Stage 1 - installation of swing gate posts

The following can be used as a stand:

• profile pipe. The choice of pipe cross-section is justified above in the “materials” section;

• concrete pillar - purchased or poured on site;

• brick or natural stone. The latter is used more for cladding due to its non-standard dimensions;

• wooden beam (100x100).

Methods for installing poles/racks:

The pipe can be driven to a depth of about one and a half meters

This installation method is the fastest, most cost-effective (no concrete costs), and it is possible to replace the stand. The main thing when constructing pillars using this method is to maintain the level. This will prevent the gate from skewing.

Material prepared for the website www.site

Strengthen the support pillar with concrete (concrete), i.e. make, a kind of foundation for the base of the gate.

We will describe the second one, because the first requires brute force and suitable soil.

Installation of gate posts

Execution sequence:

1. Dig or drill with an earth drill a pit at least 1 meter deep. The diameter of the drill must be at least 200 mm, with a pipe cross-section of 100x100.

   The depth depends on the depth of soil freezing in the installation region. The width of the sides is determined by the quality of the soil and the dimensions of the supports (pipe, wood, concrete).

2. We arrange a sand and crushed stone cushion under the concrete. Its height is 150-200 mm. The purpose is to prevent the post from deepening and to create a foundation for concreting.
3. We install the post and level it using a building level.
4. Prepare the concrete and pour the stand.

Concrete pillars must withstand for 7 days, no less. The concrete must harden well. While the concrete is curing, periodically moisten it with water. Of course, cracks in such a small area are not as dangerous as, for example, cracks in the foundation of a house. But it's better to avoid them.

Tip: If you use brick or concrete rather than a pipe, the depth of the recess will also be 1 m.

For reliability, the racks need to be reinforced. And also, take out two or three reinforcing embeds in advance for attaching the hinges.

Stage 2 - production of swing gates

Sequence of independent device.

Installation location and appearance of swing gates

This is the starting point from which all work begins. Often the installation location has a direct impact on the appearance of the structure.

For example, you need to install a gate in the backyard, at the entrance to the garden, or to fence off a future construction site. Then both the material and the design will be as simplified as possible.

If it is a front gate or a garage, then the costs will be higher.

Swing gate sizes

Ideally, the gate is made together with the fence. However, if, for example, you have a hedge or you are expanding the driveway and need a new gate, you should accurately measure the dimensions.

Tip: Try to make swing gates in the same style as the fence.

It is important to measure the height and width of the opening for the gate. When measuring the height, keep in mind that a technical gap is usually left at the bottom of the gate. Its value depends on the coverage of access roads. If you have asphalt, tiles or concrete in the gate area, then 5-7 cm of clearance is enough. If the soil is not strengthened (grass grows) and the surface is not flat - then about 10 cm. Technical clearance is also needed to reduce the wind load, if the future gate is solid, without ventilation gaps.

It is also necessary to ensure that there is sufficient clearance between the sashes. This will level out slight displacement of the racks.

Drawing of swing gates

Having at your disposal a drawing and design diagram of swing gates, it is easy to calculate the amount of material required.

Try to make a frame for the gate so that its dimensions correspond to the dimensions of the intended finishing material. This will make the installation process easier for you and avoid connecting seams on the front surface of the gate. For example, the standard width of PS-10 corrugated sheet is 1,100 mm.

Advice. When making calculations, use the working, and not the total, width of the finishing material.

The figure shows a diagram of a frame for swing gates, which we will take as a basis.

Using this drawing as a basis, you can calculate the amount of material, attachment points and parameters of pipes and finishing materials.

In our example, the frame is a welded structure. It will be made of pipe or metal profile. But you can also use wood. If, for example, you have a completely wooden gate.

The picture shows that the frame has a square appearance and internal jumpers. They are needed to give the frame rigidity.

Please note that this diagram is shown for swing gates that are not equipped with a wicket. The gate is located separately. If you decide to save space and embed the gate into the gate, consider this need when creating a drawing of the frame for swing gates.

Calculation of swing gates

For the frame shown in the diagram you will need the following material:

• profile pipe 60x40 - 22 meters - for the perimeter of the frame and lintels. This pipe will be attached to the racks and support the entire structure;

• profile pipe 40x20 - 15 meters - for the internal frame (perimeter reinforcement). Namely, the gate lining material will be attached to this pipe.

Usually pipes are sold by linear meters, so it is better to immediately take the sizes that you need. Among other things, this will make delivery easier for you.

Pipe cutting and grinding

At this stage, the manufacturing of frame components occurs. The pipes are cut to the required length and polished.

Grinding is needed to remove rust from pipes. If the metal is lubricated with oil, it must be removed using a solvent (usually gasoline).

Welding swing gates

When carrying out welding work, remember safety precautions. It is better when this type of work is performed by a specialist. This way the quality of welded joints will be higher. And the appearance is more beautiful.

When welding, it is important to make joints in such a way as to protect the pipe from water leakage. Otherwise, water or snow will get into it. In winter it will freeze, and with warming it will begin to expand. This will inevitably lead to expansion of the pipe walls. And, as a result, to deformation of the entire structure.

In our example, the internal pipes are welded in the form of squares. But this is not of fundamental importance.

The pitch of welding fastening of the external and internal frame (pipes 60x40 and pipes 40x20) is 250-300 mm. Maintain staggered order. This way, the pipes will not break the weld seam due to thermal expansion.

Some drawings of frames for swing gates are given below.

The more stiffening ribs, the greater the wind load your gate can withstand.

If you are sewing up a fence with finishing material, then weld the pipe in the middle of the outer one. This way, it’s easier to mark the place where the casing is attached.

Primer

It doesn’t matter what material was used to make the frame - metal or wood - it needs to be primed. A primer will extend the life of the paintwork and make the application process more enjoyable.

Welding areas are primed especially carefully.

Latch and hinges for swing gates

The hinges are welded to the frame and to the racks (pillars). If the stand is made of brick, and the removal of reinforcement was not provided, then you must first attach the channel to the brick with a dowel, and then weld the loop.

Varieties of loops are shown in the photo

The valve mechanism you choose is the one you prefer. The most common and easiest to manufacture is the one shown in the photo.

Finishing of swing gates

• Painting the frame

The frame must first be wiped clean from dust. Any paint is suitable for painting. It is better to apply the paint with a spray gun, so it will lie smoother and the work will go faster. You can also use a brush. In this case, the process will be somewhat delayed, and the paint consumption will be less.

It is better to apply paint in several layers.

• Fastening finishing material

Covering the gate is possible before and after installing the frame on the posts. To do this, we attach the casing to the inner pipe (40x20, in our example). The method of fastening and fastening depends on the finishing material.

How to cover swing gates

The following materials are used:

Corrugated sheet

Advantages - low price, wide range of colors, light weight. The disadvantages include: the difficulty of replacement (it is difficult to choose the color, because the sheet fades slightly, plus, the shade depends on the batch and manufacturer). And also, the possibility of damage during installation and high windage.

Tree

Advantages - availability, beautiful appearance of natural wood, ease of replacement. Disadvantages: high maintenance requirements. Over time, the wood may dry out, leading to cracks.

A metal sheet

The advantage is durability. The disadvantage is significant weight.

Forging

Advantages: unlimited designs. The disadvantage is that only specialists can make forged gates with their own hands.

Steel mesh

Advantages: low cost, high speed, light weight. Disadvantage - low aesthetic properties; the transparency of the fence makes the entire territory of the yard accessible for viewing.

Rabitz

The characteristics are the same. More suitable for installing technical gates.

Combined

The basis of this combination is most often forging, which allows you to give the gate any shape. And they are closed by lining the inside with wood, metal, corrugated sheets or polycarbonate. Examples of such gates in the photo

Installation of swing gates

So, the racks are ready, the frame is welded, the finishing material is fixed. It's time to hang the gate.

Conclusion

We hope you are convinced that installing swing gates with your own hands is not a difficult task. If you have the materials and tools, installing the gate will not take more than a week. From the installation of the pillars to the installation of the gates. And if you consider that it takes 7 days for the concrete pillars to settle, then generally a day. I wish you success!

Swing gates - photos of different device options

Any personal plot is fenced with a fence and gates. Such designs ensure the safety of personal property. The selection and construction of gates can be done independently. Before work, you will need to create drawings, take into account the basics of installing poles and choose the right construction material. During the installation process, it is better to follow the advice of experienced builders. When installing gates with your own hands, you will need drawings, photos and videos of finished structures.

Advantages of swing gates

Regardless of the design, the owner of the site can choose the method of opening the doors - outward or inward. Installation of swing gates is carried out without any particular difficulties. If all stages of construction are carried out correctly, the structure will serve for a long time and properly. Classic swing gates have a number of advantages:

• high functionality;
• compactness;
• no size restrictions;
• the ability to use any materials;
• ease of use.

Also, such gates are easy to install, they are low maintenance, quite durable and can be built in a wide variety of design solutions. Swing structures also have a long service life. If the need arises, they can be equipped with an automatic control system.

The disadvantages of such gates include:

• the importance of taking into account wind loads relevant to a given region;
• the need to free up sufficient space for opening and closing the gate.

A simple consideration of these factors allows us to understand that swing gates have much more advantages than disadvantages.

Swing gate design

Regardless of size, finish, opening direction and materials, swing gates include:

• Support posts. The posts must match the type of gate.
• Frame. It is made of metal or wood. The main requirement for the frame is greater rigidity.
• Sheathing material. Metal profiles are very popular.
• Loops. They are selected according to the weight of the gate and its design features.
• Locks and constipations. They are devices that prevent intruders from entering the site. Also, such mechanisms have a variety of designs.

Every detail of a swing gate performs an important function. Correct installation of each of them is the key to long service life of the gate. When building a gate with your own hands, you need drawings, diagrams, and design sketches.

Gates made of corrugated sheets

Swing gates are the most popular among private developers. The doors can open in one or both directions. Corrugated sheeting is used as the material that is attached to the frame. You can also make a wicket in the door leaf.

The popularity of swing gates is achieved due to the long service life of such products. Metal structures do not require repairs compared to wooden ones. They are often supplemented with automation systems. In addition, the profiled sheet has a number of advantages:

• low cost of materials used;
• simple manufacturing process;
• sufficiently long service life;
• external attractiveness;
• excellent characteristics.

The disadvantage of gates made of corrugated sheets is their exposure to wind loads. Such sashes must be installed on reinforced hinges. It is also worth taking care in advance about the correct installation of the pillars. The disadvantages of such structures include the need to free up space for opening.

However, the advantages of metal profile gates significantly outweigh their disadvantages. Moreover, many problems are not so critical that you need to pay attention to them.

Installation of swing gates

If you plan to make swing gates from corrugated sheets, you will need to install fairly strong posts. For supports, it is better to choose pipes with a diameter of 80 mm or more. A square pipe will also cope well with loads.

The doors are welded from square pipes. It is better to choose products with dimensions of 10x25x3000 mm. To connect them you will need to use welding. The frame must be strengthened with diagonal tensioners. It is also necessary to provide space for constipation, a lock and limiters.

Work begins with the installation of supports. This stage requires some preparation. It is also important to use ready-made gate drawings and photos. You can also get a lot of information from videos showing the installation of swing gates step by step. Useful information on the topic is in this material:

Pole installation methods

Support pillars can simply be buried in the ground or concreted. In the second case, the supports will be much stronger and more reliable. Also, do not forget about the need to correctly install the hinges. When driving, it is necessary to immerse the supports into the ground 130 cm.

Using this method of installing gate posts saves time. Almost immediately after hammering in the supports, you can attach the hinges and hang the sashes.

Another method is concreting. It is better to combine it with support reinforcement. The depth of the pits is 150-200 cm. The diameter of each pit depends on the cross-section of the pipe being buried. First, a cushion is prepared (from sand and crushed stone, and then concrete is poured).

Important! Before concreting, it is worth placing a waterproofing “glass” made of roofing felt into the hole. Thanks to this, the concrete milk will not go into the ground, which will make the solution more durable. Concrete must be compacted periodically to expel excess air.

Manufacturing and installation of sashes

After installing the pillars, you will need to make the sashes. Particularly time should be devoted to this process. The work is carried out in stages:

• First, you need to lay out a profile pipe or corners on a flat surface and weld the shape according to the drawing.
• To ensure high structural strength, it is important to strengthen the sashes with diagonals.
• When the frame is ready, you can begin covering it with profiled sheeting. The material should be 2 mm thick. You should not choose metal that is too thick - then you will have to think about strengthening the racks.
• After this, the hinges are installed. First, one half of them is welded to the gate frame, and then the other half is welded to the post.
• When all the work is completed, it is necessary to take care of security - a lock and bolt are installed on the gate.

The same principle underlies the installation of a wicket door. The painting of the sashes can be done either suspended or on the ground - even before installation on the supports. The difference is that on already installed gates, drips may appear during the paint application process. For this reason, you need to treat the work with special care.

Sliding gates

Sliding gates are particularly functional. They do not take up much space, are silent, and open quickly enough. There are several types of sliding gates:

• recoil;
• hanging;
• console

The least popular type of gate is the hanging type. This is explained by the emergence of travel restrictions, the complexity of installation, and the many requirements of such structures.

If your region regularly experiences severe frosts, you should not install sliding gates on your property. The guides will become covered with ice, which will reduce the functionality of the structure. Such gates will require constant maintenance. Otherwise they are quite good.

Anyone can build sliding gates with their own hands. To do this, you need to have drawings and decide on the dimensions of the sash. Various videos and photos of finished structures can also help. The main condition for installing sliding gates is the need to free up space along the fence.

A special profile is installed on the ground surface. The sash will move along it. Special rollers are also installed on top of the gate. To ensure that the gate stops in the right place, special fixing elements are installed. Useful information is in this video:

Installation of cantilever gates

Cantilever gates are considered one of the most complex. The advantage of such structures is that there is no need to equip a ground rail. The gate does not touch the ground surface while moving. Also, when installing cantilever gates, there are no height restrictions. In addition, only 1 support post needs to be installed. Such structures are used at any time and in any weather.

The folding is quite simple. It consists of a frame and casing. A guide is welded to the bottom of the sash, inside which roller carriages are placed. The gate can move along them in both directions.

Advice! Once the frame is welded, it is necessary to clean the welds. In addition, traces of corrosion should be removed from all surfaces.

The cantilever gate leaf is conventionally divided into two parts - the one that closes the opening, and the one that serves as a counterweight. The second part should have a length equal to 35-50% of the length of the first. A special foundation is installed under the cantilever part, capable of withstanding significant loads during operation of the gate.

To equip the foundation, you will need to prepare a channel that will be equal to the length of the cantilever part of the sash. It is also worth digging a pit into which the concrete solution will be poured. The length of the pit should be several tens of centimeters greater than the length of the channel. The foundation is poured to a depth below the freezing level of the soil. In addition, in order to securely fasten the channel to the foundation, you will need to make a special reinforcement cage.

Once the foundation has been poured, the sash can be installed. This work also has its own nuances and requires a special approach.

Necessary accessories

The elements necessary for installing cantilever gates are presented in hardware stores in a wide variety. To choose the right fittings, you will need to determine the weight of the sash and its dimensions. It is also important to know the width of the opening.

The standard set of elements for installing sliding cantilever gates includes:

• guide beam;
• plugs with which the beam is equipped;
• end rollers;
• additional device equipped with 2 rollers;
• roller bearings;
• roller catchers.

This set is necessary when installing cantilever gates. During the selection process, it is important to seek the opinion of a specialist.

Up and over gates

Such designs are perfect for a standard garage. It is not recommended to use them as gates on the site - they have a height limitation. The principle of operation of the structures is quite simple - the canvas moves upward, taking a horizontal position. These gates open and close quickly and are relatively easy to install.

When the swing gate opens, it begins to protrude slightly outwards. This should be taken into account when driving the car to the garage. If you do not calculate the distance, the gate may hit the car.

These gates have become popular partly due to their compactness. When folded, they take up virtually no space. They also differ in accessibility. The frame is covered with wood, metal sheets or composite. If we compare such structures with swing ones, they clearly have more advantages for installation in a garage.

To make up and over gates you will need to draw a diagram. Features of installation of structures:

• When preparing to install a lift-and-turn structure, you will need to make 2 frames - for the gate and the one on which the gate will move.
• Inside the garage, the frame will be L-shaped.
• The canvas is equipped with sashes at the top and bottom.
• Also, levers are mounted to the frame to lift the blade during the opening process.
• Be sure to provide shock absorbers that will soften the impact of the blade during closing.

The support frame is attached to the opening using anchors. Installation of automation should be carried out only after all procedures for installing the gate. It is better to entrust the work to specialists who will help install the power supply.

Installing up and down gates will not take much time if you are well prepared for the work. The process will also speed up if you invite an experienced craftsman. In addition, it is necessary to use the design drawings to calculate in advance the dimensions of the sash and guide frame. How to install such gates can be found in the video:

Results

It is better to install gates of any type according to the drawings. Swing structures are more often used in individual construction, sliding structures are used both for closing entrances to private areas and for fencing industrial facilities. Lift-and-turn structures are ideal for garage entrance equipment.

Each type of gate has certain advantages. They also have certain disadvantages. The simplest and most affordable option is a swing gate with two leaves. During the installation of such structures, special attention should be paid to the installation of support pillars.

If you are planning to make a gate with your own hands, you will need step-by-step instructions that will help you calculate all the nuances of the work and will facilitate the process of creating them.

Before purchasing the necessary materials, decide on the type of gate that is suitable for a particular case and a convenient method for installing it.

Types of structures

There are many types of gates, which can be made of different materials and equipped with special mechanisms. A wide selection allows you to create homemade gates based on the characteristics of the room or area, your needs and frequency of use.

Before making gates, you should study the main types of designs that are popular.

Sliding

Sliding canvases are divided into several categories. Depending on your preferences, you can choose the option you need. For each type of structure, you will need to clear a free area along the fence so that the sash can open freely.

There are cantilever sliding structures, suspended and sliding. The structure of such canvases involves moving along rails and other metal profiles.

Hanging options are not popular for use on private property, since the entry height is limited by the upper profile to which the canvas is fixed. The valves also move along this profile.

Some country house owners install fan designs, which received this name due to their appearance.

Sliding doors, which move on a rail located along the wall, are also not popular in snowy and northern cities.

In order for the sash of sliding structures to move freely along the rail, it will be necessary to constantly remove ice and other debris, which is not always comfortable in winter.

Cantilever leaves are considered the most optimal design for sliding gates. The canvas is rigidly attached to the beam, which moves along the cantilever assembly and moves the sashes behind it. Despite the fact that the structure of the products is complex, they work great in the winter season, since the sash does not come into contact with the ground.

Tilt&Turn

This design is optimal for garage conditions. They are not suitable for installation in the yard, since the gates limit the entry height. The canvas should function freely by lifting and sliding the sash under the ceiling of the room.

Swing

Such structures with a door are often installed on the fence in the private sector. Swing gates are based on pillars, two of which are located at the width of the door leaf, and the third pillar is located next to the gate, if it is located next to the structure.

Rolled

These designs have recently appeared on the market. Gates are made of steel strips, which are combined into a flexible sheet. When it is necessary to open the gate, they begin to roll up and wrap around the shaft. This solution allows you to drive close to the room.

Folding

Folding gates are known to many as “accordion gates”. The door can be opened upwards and sideways. There are sealing gaskets between the metal mesh. Designs that open upward have become widespread.

Manufacturing Features

Each type of gate has its own design features. Before starting the manufacturing process, you should study the structure diagrams of the canvas and work out an action plan. Swing gates are not an exception to this issue. Even a beginner who has not previously worked with metal products can make a swing gate from corrugated sheets with his own hands.

To make products, you will need skills in working with a drill, welding, screwdriver, construction tape and grinder. The design of the products is created in such a way that the use of free space should be accompanied by maximum functionality. The reliability of the gate is ensured by roller blocks, which are located in the lower part of the profile beam and move due to the opening or closing of the doors.

There are several features of this type of gate that distinguish it from other designs:

• when assembling the canvas, push-button corner connectors are used, thanks to which it is possible to prevent the sashes from sagging during use;
• The material fasteners are hidden, thereby preserving the decorative properties of the gate. Also, this solution prevents foreign objects from entering the space between the profile;
• The doors are fastened using three-section hinges. Details allow you to extend the service life of the structure.

Studying the drawings of a standard sheet made of corrugated sheets, you will notice that a frame made of a square metal profile is used as the basis of the structure. As an alternative, a thick-walled pipe with a diameter of 30 mm is used.

To strengthen the doors, a metal vein is used. It should be positioned horizontally. Such reinforcement allows you to maintain the geometry of the canvas.

You can secure the doors using electric welding or metal screws. Since the corrugated sheet is light, two strong loops with a diameter of 20 mm will be enough for it. Metal pipes with a diameter of 60-100 mm can act as a load-bearing support.

The gate leaves are fastened on the basis of the fence that is present on the site. If you are planning to install a brick fence, consider installing embedded joints between the bricks in advance. Hinged supports will be welded to them.

The optimal width of entrance gates on private property is 3 m. These dimensions are sufficient for a truck or car to enter the yard. The height of the gate should not exceed 2 meters.

L-shaped pins can be used as a locking mechanism. They should be located at the bottom of the sashes. Special clamps are dug into the ground, which are metal tubes whose diameter exceeds the thickness of the locking mechanism.

To ensure that the new gate fits harmoniously into the overall interior of the site, you can use corrugated sheets to finish the frame part. As a rule, the material is attached to the frame of the canvas.

Maintain a distance from the ground, which should be 50-70 mm.

Material selection

The type of material from which the gate will be made is influenced by the dimensions of the structure, its weight and other factors. Typically, the frames for the sashes are made from a profile pipe with a cross-section of 60x40 mm. Choose metal whose thickness is 1.5-2 mm.

The cross-sectional size also depends on the weight of the gate, but experts recommend making a choice based on the following indicators:

• if the total weight of the gate leaves does not exceed 150 kg, you can use a pipe whose cross-section is 80x80 mm. The metal thickness should be 4 mm;
• when metal gates weigh from 150-300 kg, it is necessary to use a pipe with a cross-section of 100x100 mm and a thickness of 5 mm;
• if the weight of the structure exceeds 300 kg, iron pipes with a cross-section of 140x140 mm and a material thickness of 5 mm are suitable for you.

To create racks, you can use brick, wood or concrete. When choosing a material, you should study the properties and its resistance to expected loads.

Hinges can have adjustable or non-adjustable mechanisms. Make sure that the material used is of high quality, as the hinges must support the weight of the fabric.

The lock may have a mechanical structure or operate on the basis of electromechanics. The choice should be made based on your preferences. You will also need paint to paint the racks and metal profile cladding.

The sheathing can be made of any material. Many people make cladding from profiles; some owners of country houses choose combined options made of wood and metal or PVC. Any option you like will be suitable for this purpose.

If you are planning to create an automatic gate, make the frame more durable. Automation can be installed immediately or later.

Dimensions

The best option is to build a gate at the same time as a fence. However, many people are faced with a situation where they need to widen their driveway or replace an old product. In this case, you will need to make an accurate calculation of the future gate.

Taking measurements and calculating the required amount of material, take into account the surface of the driveways. If your area is equipped with an asphalt, concrete or tiled surface, you can leave a clearance of 5 cm. If there is grass on the road, increase the clearance to 10 cm for comfortable opening of the gate.

Do not forget to leave a gap between the sashes so that in the future it will be possible to level out the displacement of the supports.

Tools and accessories

Gates can have a variety of structures. Many people equip their canvases with built-in gates for convenience. Before creating a gate, you will need to carefully consider how the finished canvas will look, draw a diagram or sketch of the structure. This decision will help you decide on the tools and materials that will be required to create the canvas.

The standard list of components for creating gates consists of the following items:

• sheathing for sashes, support pipes;
• reinforcement for creating stiffeners;
• a pipe made of a profile or a square of metal for the frame of the structure;
• primer, material for painting;
• bolts, latches or bolt mechanisms;
• hinges for sashes, guides and closers if necessary.

You will also need the following tools:

• construction cord made of nylon;
• welding machine;
• hammer;
• screwdriver or drill;
• electric grinder;
• special scissors for metal.

When planning a new gate, you will need to pay special attention to the dimensions of the structure and the presence of a gate. Due to the large sashes, the weight of the entire structure increases, so the frame should be made of reinforced material.

How to do it yourself?

Gates are manufactured in stages. The process is divided into two steps:

• installation of racks for hanging the canvas;
• creation of swing gates.

You can replace the stages, but the posts for the gate structure must stand for at least seven days, after which you can hang the frame on them. In order not to waste time, you can start welding.

Installation of supports

Supports can be made from:

• profile pipe;
• concrete pillars. You can buy a finished product or fill it yourself;
• brick or natural stone.
• wooden beam.

Installation of supports can be carried out using the following methods:

• driving. The driving depth should be about 1.5 meters. This method is considered the fastest and most economical. When choosing this method, you should carefully monitor the level so that the gate does not warp;
• concreting with reinforcement. You will need to strengthen the pillar with concrete.

Step-by-step instructions for installing supports:

• if you decide to do concreting, you will need to drill a pit with a minimum depth of 1 meter. Drilling must be done with a drill whose diameter is more than 200 mm.
• The depth of the pit will depend on the degree of soil freezing in your region. The width of the sides can be determined using the quality of the soil and the size of the support itself.
• create a concrete cushion 150-200 mm high. It should consist of sand and crushed stone. The cushion is used to prevent deepening of the racks;
• then you will need to mount the post and level it using a building level. After leveling the support, you can begin pouring;
• The concreted structure must last for a week. This is the minimum period required for concrete to harden. Do not forget to periodically moisten the concrete with water to prevent cracks from appearing;
• to increase the reliability of the supports, it will be necessary to make reinforcement and install a pair of reinforcing embeds under the hinges.

Creating sashes

Before you begin construction of the structure, you should decide on the location and appearance of the gate. The place where the products are installed can influence the appearance of all elements.

If you are planning to install a gate in your backyard, at the entrance to a garden area, or to create a fence for a future construction site, you will need to choose simple materials. For the front gate you should choose more expensive and presentable products.

A universal guide for making gates with your own hands:

• prepare a drawing of the future structure. Using the diagram, you can make an accurate calculation of the required materials;
• The gate frame must correspond to the finishing dimensions. By observing this condition, you can simplify the entire work process and will not encounter connecting seams on the front part of the canvas;
• when making calculations, you should use the indicators of the working width of finishing materials;
• to create components for the frame, you will need to cut the pipe to the required length and sand it;
• Grinding is required to clean products from rust. If there is oil grease on the metal, it can be removed using solvents.

Welding

When interacting with welding, do not forget about safety precautions. If you do not have enough experience, contact specialists. Using this method, you can improve the quality of work and get an attractive design.

Joints should be made in such a way that water does not flow into the pipe.. If the joints are welded incorrectly, snow or water will get into the pipe, which will begin to increase in volume in warm weather. This will lead to expansion of the walls of the product and deformation of the entire structure.

If you are welding the outer and inner frames, a staggered order will be required. In this way, it is possible to prevent ruptures of welding seams due to thermal expansion.

Stiffening ribs influence resistance to wind loads. If you are sewing a fence using finishing material, weld the pipe in the middle part of the outer seam. In this way you will mark the place where the sheathing material will be attached.

Welding of the loop should be done to the posts and to the frame. If you used bricks to make the pillars, but no reinforcement was removed, you will need to attach a channel to the brick, and then start welding the hinges.

Primer

No matter what material you use to create the frame, it will require priming. The primer extends the life of the paint and makes the application process more comfortable. Welding areas should be primed more thoroughly.

Painting the frame

Before painting, remove all dust from the frame. To paint the part, you can use any type of paint. Most people use a spray gun as it ensures a more even coat application. Using a brush delays the process, but reduces paint consumption.

With this step-by-step guide, you can make your own gate and simplify the process as much as possible.

To learn how to install a gate with your own hands, see the following video.

Beautiful examples and options

A beautifully decorated gate will attract attention to the site and demonstrate the good taste of its owner. Openwork canvases are popular. Decorative doors look expensive and sophisticated. The inner side of the structure can be sheathed with polycarbonate sheets. Externally, such gates look like a real work of art.

The products can be installed in a country house or on a country plot. With patterned elements you can show the individuality of your territory.

Stained glass inserts on the entrance gates give the entire area an impressive and unusual look. The designs demonstrate their brightness and originality, attracting the attention of others. You can choose any design depending on your imagination. The style of the idea must be combined with the rest of the design components.

If you want to give your site a more austere look, pay attention to solid metal gates with forged elements. They will harmoniously combine metal with decorative patterns. The chosen design will show the good taste of its owner and will hide the area from prying eyes.

On the site that borders the plantings, you can install gates made of natural materials. You can use a stone for support. Such canvases look beautiful against the backdrop of nature. Natural components will last a long time if you treat the surface with protective products.

The strength of the gate is guaranteed by stone supports. This design is convenient, since when replacing the main leaf there is no need to dismantle the entire gate.

Compact white gates always attract attention. The white color scheme gives the products lightness and weightlessness. Although the gates have a catchy color, they will blend organically with the overall style of the area.

The design will attract the attention of passers-by, since there is an opinion that only wealthy people can afford such gates.

Sliding products with an original design will look good in the country. They can save space on your site and will delight you with their modern style.

Many people equip gates with wooden gates, which can be used not only as an entrance to the territory, but also for zoning space.

It is believed that swing gates are the oldest type of gate. Their existence is measured in millennia, but the principle of the device remains constant, and changes concern only the materials of manufacture and design.

They are used almost everywhere: in enterprises, cottages, and private homes. The availability of materials necessary for their manufacture, reliability and simplicity of design explain such a wide distribution of gates of this type. Gates can also become a decoration for your property if you manage to make their lining beautiful. The lining can be made from corrugated sheets, metal sheets, forging, etc.

The advantages of swing gates include:

• simplicity of design
• low manufacturing cost
• versatility
• long service life
• almost complete absence of maintenance required.

However, these gates also have disadvantages:

• In winter, snow removal is required to open them
• Gate leaves require significant free space so that they open freely

Let's start manufacturing - stages of work

The first thing you need to take care of is load-bearing pillars. They need to be manufactured and then installed. For swing gates, pillars made of a profile metal pipe with a diameter of at least 100 mm, wooden beams made of hardwood, or concrete can be used. When installing such pillars, they must be concreted to a depth of 1 m or more.

If the pillars are built of bricks, then their foundation must be concreted to the same depth. The pillars themselves and their base must be reinforced. From the pillars inside the opening, a corner must be released or installed, which will be necessary for attaching the gate posts.

Concrete for concreting pillars is made from a mixture of cement, crushed stone and river sand in a ratio of 1:4. To make it easier to work, it is best to use fine crushed stone.

After pouring the load-bearing pillar, let it sit for 7 days or more so that the concrete sets well.

While waiting for the concrete to harden, you can do manufacturing of gate leaves. First of all, you should prepare the pipes for making the frame. They must be cleaned of corrosion and dirt, degreased with solvent or gasoline and a layer of anti-corrosion primer applied. When the pipes are ready, the frame must be welded in the form of a rectangle or square. To ensure double-sided lining, an additional pipe is welded flush with the main one in the middle part of the frame. After sanding the weld seams, the gate frame must be primed and painted.

After the paint has dried, you should begin sewing up the door leaf. The choice of lining material and the order of lining is a very individual matter and depends mainly on the taste of the owner.

The next stage is suspension gate If the supporting pillars are metal, then the gate hinges are welded to the pillar itself. If the pillars are stone or brick, then a metal stand must be attached to them using dowels. And the hinges are already attached to this rack.

If you make swing gates with your own hands, they will cost you much less. If you know how to do basic plumbing and if all the necessary materials are on hand, then making swing gates will take two or three days.

Swing gates - not a single rural yard in Russia, not a single country house, can do without them. It doesn’t matter what their design is: solid metal or wood, openwork forging or simple welding of rods, angles, pipes.

You can make it yourself

Their design is the simplest of all known: sliding, lifting, single or double leaf. They let in and out the owners’ car, a cargo scooter “Ant” or a walk-behind tractor with a trailer. They can be equipped with a yellow signal light or an antenna for remote control of the “close-open” mechanism. With a gate for adults and children in one part of the plow or separately next to it.

For those who have not yet had similar ones, read our recommendations for creating entry barriers, look at photos of gate drawings, collect the necessary tools, purchase materials and start working on your own.

And if you decide to build a garage in the yard, then the experience gained from assembling a plow on the estate will also be suitable for installing the entrance to it.

You can also download a drawing of a garage door on the website. The design of these gates is simple and clear, installation is simple, easy to open/close, and reliable.

Device principle

The design of such fences has remained unchanged for centuries. Only the materials for plowing are changed. To the traditional options (made of simple metal or wood), elegant profiles and polycarbonate are added.

The advantages of plowing are:

• ease of assembly and installation
• minimum cost when assembling with your own hands
• durability
• ease of maintenance
• Suitable for office areas, technical complexes, garage cooperatives
• Variation in sash widths up to fifteen meters

Let's pay attention to installation

The gates are mounted on side posts made of pipes with a diameter of 10 cm, a welded pair of corners or ready-made profiles. They are concreted to a depth of at least a meter so that the frost does not “drive” the gates.

The height is enough to be two meters, the same width of each door. They swing open either immediately or each separately, into the yard or out. This needs to be thought through right away. They are hung on hinges that are well lubricated with a graphite mixture so that they do not creak.

When closed, if there is no opening mechanism, they are fixed in several ways. Either transversely with an inch pipe mounted on a pair of hooks for each plow, or with fasteners at the junction of the mortars, mounted in the concrete. The lower fastening will also be needed in the case of simply fixing each plow.

The cladding, painted corrugated sheeting or polycarbonate, is attached to the frames with bolts or self-tapping screws. The last hardware per square meter of fastening is needed eight to ten pieces.

You leave the last material in its translucency or paint it with a color of your choice. The corrugated sheeting, which continues in the form of a fence from the gate along the entire length of the front part of the estate, looks good.

The disadvantage of the goal format is its large turn. This is a particular drawback for winters, when a lot of snow must be cleared in order to open the gate.

Mechanization

This convenience will have to be purchased as a finished product, but it will take a long time to make it yourself. The mechanism is similar to a door closer in entrances, only much more massive and powerful.

You can install it closer to the ground if winters have little snow, or better in the middle of each side of the gate. For the middle, less bulky door closers are sold.

In both cases, it is necessary to weld the structures to the fasteners of the plows. Our descriptions are minimal; you can see all the procedures in detail on the video of the gate drawings.

Alternative to swing gates

If swing gates do not suit you due to the opening area of ​​the gate, look at possible drawings of sliding gates. Perhaps build them yourself. Only such gates will become twice as heavy. Because instead of the area of ​​two swing doors, here they will be welded together. A cone will also be added at one end of this design.

It is necessary to completely cover the entry space. Therefore, manually moving such gates along one line along the fence is problematic.

Therefore, a mechanism is needed in the form of a gearbox or worm gear on the teeth of the slide. For winter use, it is necessary to consider protection from snow and rain.

Their length for a standard estate gate is four meters. The driving angle adds at least another 1.6 meters. The fastening is radically different from swing ones.

Along the length of the gate, a profile-slide is installed at the bottom to move the structure along it. On both sides of them there are rectangles embedded in concrete with a height slightly higher than the gate with a distance between the verticals of 10-15 cm. The frame moves through them, and when closed they hold it. On one side, you concrete the platform for two meters, and on it you strengthen the continuation of the profile and the entire movement mechanism.

You can also download a drawing of a garage door on the website. Below we will talk about one garage structure.

Overhead garage doors

There are two more types of gates - overhead and garage. The lifts themselves are mounted in a detached garage or built into a building. They are not suitable for open air, since they have a complex design for the street. When rising, it will create windage in the wind, which will lead to deformation of the frame.

A drawing of a lift gate for an integral garage shows that it can be opened in winter even if there is a snowdrift in front of the engine room.

The entrance leaf simply goes up along the lower slide, and the two upper wheels along the same guides lead the structure almost horizontally.

If the gate is made not of too thick metal, but of a profile, then you can raise and lower it manually. Provide a soft seal along the contour of the gate against wind, snow, and rain.

Photos of gate drawings