At the beginning of this short article, it is necessary to stipulate that only mechanical locks need to rearrange the tongue. Magnetic locks can be mounted on a door with any opening side without rearranging the tongue, since the tongue itself has a rectangular universal shape.

The situation is different with mechanical locks. The tongue is made in the form of a triangle, where the side parallel to the axis of the lock secures the door. Accordingly, when changing the side of the door opening, it is necessary to unfold the lock tongue in the same plane, but on the other side.

Inexperienced installers or people who are faced with this problem for the first time may have the misconception that the locks are different in the opening side. In fact, this is not the case. All mechanical locks are universal and offer the ability to rearrange the tongue without disassembling the lock body.

Rearranging the lock tongue is very simple and quick:

After this simple operation, you can put the lock on the door with both left and right opening. It is important to note that any lock fits any handle, including

When redeveloping a room, any door, both entrance and interior, sometimes needs to change the direction of opening the door handle. This is necessary if, for the convenience of the owners of the house, the side of the door opening is changed. To those uninformed in the construction of locks, such a rearrangement seems to be a big problem. How to change the direction of opening the door handle without damaging either the door or the lock? Obviously, in order for the door handle to open in the other direction, the tongue must be rearranged - in any current door handle this can be done.

Is it difficult to rearrange the doorknob tongue?

The tongues of today's locks are triangular in shape. The side parallel to the lock axis ensures that the doors are locked. Therefore, if the opening side changes, the tongue also needs to be turned in the other direction. Many are mistaken, assuming the existence of some right- and left-sided locks, because of which it is impossible to change the direction of opening the door handle. In fact, any door handle is universal - the tongues in modern handles do not even need to disassemble the lock mechanisms.

How do I reposition the doorknob tongue?

First, you need to position the lock mechanism on a flat surface. There is a hole near its center on the side opposite to the tongue. In it, one cannot fail to notice the plastic ears on both sides. They are usually white or colored like the tongue itself. Use a long, tapered object (a Phillips screwdriver, ballpoint pen or pencil) to lightly press the ears. This requires care not to break them. As a result of the pressure, the ears open, releasing the tongue.

Once the tongue of the lock is pulled out, it is easy to turn it in the desired direction. As a result, the direction of opening of the door handle also changes. Now you need to return the lock tongue to its original place. To do this, you just need to press on it until you hear a soft click. When the tongue is in the correct position in the lock, the plastic ears will close by themselves.

In order for the direction of opening the door handle to change so simply, you should buy only handles with modern locks, the tongue of which can be easily reinforced with the other side. Otherwise, it will be difficult, and sometimes impossible, to change anything in the castle. Door handles that meet the standards of the last decade can be ordered on the website irbis-td.ru.

__________________________________________________

Almost all locks are not subdivided into right or left - they are all universal. Any lock is equipped with a tongue reversal system. The systems are slightly different from each other, but in general, they are fairly simple mechanisms.

Large key locks from Archie are equipped with a thrust stopper.

The stopper prevents the tongue from falling deeper than the level of the padlock.

However, when inverted, the stopper falls off and increases the pull of the tongue.

In this position, it becomes possible to turn the tongue over.

Most plumbing locks have the same system.

There is a hole on the back of the lock that is designed to rotate the latch.

By inserting a rod of a suitable diameter into the hole and pressing on it, you can release the tongue, which is fixed in the guide lining of the lock.

A regular latch does not have any systems and its tongue is inverted by rotating the latch itself.

If this material was useful to you, then add it to your page on social networks. You will help him become more popular.