High interior doors in the interior. Sliding doors sliding into the wall: features and installation

A known problem is small apartments. A good solution - compartment doors - does not always fit: sometimes there is so little space that all the walls are lined with furniture and there is nowhere to move the canvas. But if the partition is not load-bearing and it can be partially dismantled, then there is still an option: sliding doors that slide into the wall.

Structurally, the built-in interior doors do not differ from the compartment, they are based on the same components: a canvas (one or two), guide rails, carriages with rollers and fittings. If desired, an electric drive. The only difference is that when opened, the canvas is hidden from view. In the converted section of the wall, there is a cassette into which a door enters on rollers.

The canvas itself can be anything: wood, glass, plastic. You can choose an option that will be in perfect harmony with the rest of the doors and the interior as a whole. The roller mechanism does not differ from the standard one either.

The difference is in the fittings: locks and handles should not interfere with the displacement of the canvas into the wall. You need to decide on handles and locks in advance. If the sliding door will go completely into the wall, a lock with a button will be required to close it.

The second difference is that sliding doors sliding into the wall require more energy consumption of installation than a compartment. It is necessary to dismantle part of the wall, fix the cassette, sheathe the structure with plasterboard and complete the repair with finishing. There will be a lot of construction waste, you need to prepare for this in advance.

It is better to buy built-in doors into the wall immediately complete with a cassette. It will be too expensive and power-consuming to buy a cassette later and install it separately. The set of the pencil case door already has everything you need - canvas, mechanism, fittings and cassette.

Attention: for partitions made of brick and drywall, the cases are different. This must be specified when purchasing.

Installation sequence

1. Check the verticality of the walls and carefully calculate the opening (two widths of the canvas).

2. Dismantle the required area, if possible without unnecessary destruction.

3. Treat the opening, repair cracks.

4. Install the pencil case and secure with mortgages. The upper inserts will serve as a reliable fixation of the canvas, preventing the structure from shifting.

5. Sew up the cassette with plasterboard: the upper edge is positioned over the wrap-around box.

6. Install the built-in doors and fittings.

7. Finish the wall.

8. Install platbands.

Sliding doors that slide into the wall are a good option to save space occupied by an ordinary door, but they take 10 centimeters of the thickness of the room due to the cassette. Therefore, the ideal option for installing them is to mount built-in doors instead of self-supporting walls.

Any human dwelling has anthropometric parameters. Even if it's a hut. The dimensions of the premises and interior furnishings correspond to human height. No one would want to find themselves, like Gulliver, in the land of the Lilliputians. However, in the land of giants, the hero of the book was also not very comfortable. In addition to functionality, proportionality to the growth of a person in the area of ​​\ u200b \ u200bthe premises and furnishings create psychological comfort.

Medieval architects who erected the majestic Gothic cathedrals, with their grandiose size, caused a person who entered the cathedral to feel his own insignificance and the greatness of God. An overly tight and narrow space creates a different sensation. Remember the description of Dostoevsky's room, in which Raskolnikov lived: "his closet was located under the very roof of a five-story building and looked more like a closet than a room ...". It's good when the rooms are spacious and the ceilings are high. Even those who love small and cozy rooms will not argue with this.

But, in most cases, the size of the living space balances between necessity and sufficiency: less can not be done according to the norms, and more cannot be done for economic reasons. It should not be assumed that cramped and small apartments were built only in Soviet times. Now mass housing in new buildings also does not differ in space and ceiling height. But there is no need to treat the ceiling height of 2.65 meters as a sentence: physiologically, this is quite enough for life. And you can create psychological comfort with the help of competent interior design. There are many professional tricks. For example, tall doors can be used to visually enhance a low ceiling.

Why does it work?

What is the basis of the action of optical illusions? On the features of human vision. More precisely, on the ligament of the organ of vision - the eye and the brain. The human brain interprets the received visual information in accordance with its existing life experience and the ability for associative thinking. Therefore, a person can say that a mountain is like a bear, and a cloud is like a camel.

The human brain also accurately determines the size of objects by comparing what it sees with known things. When photographing, to demonstrate the size of something, they often put boxes of matches next to each other - because everyone knows the scale of the box, and you can, by comparing the displayed object with the "standard", evaluate it. If there is a high large door in the interior of the room, then the brain automatically "draws" everything else - a spacious room with high ceilings.

How to use it

Knowing the peculiarities of visual perception, it is possible to create conditions that are quite comfortable for a psychological sensation, even in very small premises.

1. We use vertical drawings. For wall decoration in a room with low ceilings, striped wallpaper is the best choice. Or with a pattern oriented vertically. In addition to the verticality of the picture, it is important to choose the right stripe width and color scheme. Light shades visually expand the space, but light, indistinct walls, without details to focus on, may not improve the situation, but only spoil it. Avoid large and bright drawings: it is better to choose wallpaper with forget-me-nots than with bouquets of peonies.
2. High doors. To maintain the vertical rhythm of the wall decor pattern, replace the standard doors with taller doors. True, most likely, it will be necessary to install all high interior doors in the apartment - to create a harmonious composition.

It would be nice to make high entrance doors as well - this will give the entrance to the house impressive. But unfortunately, you can only choose the entrance doors to your liking in a private house. An apartment in an apartment building is your property only inside, and the entrance area is considered common, and must meet certain standards. But if you live in your own house, tall metal doors will become a worthy decoration of the facade, turning an ordinary entrance to the house into a majestic portal.

Choosing high interior doors for small spaces, give preference to models with small elaborated details. Deaf massive structures can be overwhelming. An excellent option would be doors with deviated glass. Transparent inserts will add lightness to the design and let additional natural light into the corridor. Using a structure with an upper window at the entrance, you can not order non-standard doors, which will be more expensive, but put the usual ones.

Avoid dark doors, even if they are natural wood. Bleached oak or ash is more suitable.

It is convenient to use sliding doors to create optical interior illusions. You can order sashes for interior doors and wardrobes, made in the same style.

1. Don't forget the skirting board. Skirting boards are not only a strip between the wall and the floor covering, but also an important tool in creating visual effects in the interior. Use a polyurethane molding with a height of at least 100 mm instead of a standard skirting board - you will be amazed at the result. This finish of the bottom of the wall looks especially good, painted in the same color as the doors or door trims. Double-leaf hinged high doors with casing in the form of pilasters, resting on the heel (thickening of the pilaster, base,) in combination with a high relief plinth will help create a ceremonial interior.

There are no trifles in interior design. Each of its parts bears a functional and decorative load, creating ease of use and joy for the eyes. Moreover, it cannot be a trifle, unworthy of attention, the door is an interior or entrance. These elements are too important, and the door area is not small. Before buying new doors in the store, consider how the interior will look as a whole.

Since the times of the Soviet past, many have remained convinced that it is almost impossible to make fundamental changes in the furnishings in a typical apartment of a panel old house. Today, such doom no longer threatens to create a comfortable and stylish interior!
The standard choice of interior doors is complemented by original door leaf models of any length, size and configuration.
Don't be afraid to break outdated stereotypes! Allow yourself to live more efficiently, functionally and beautifully with the help of professional masters of our design studio!

Thanks to the creative and practical look of a specialist, modern materials and technologies, your humble apartments can become truly exclusive. In recent years, completely new ergonomic designs of living rooms have been developed, which skillfully decorate high doors in the interior of an apartment, in the design of a house or cottage.

There are many ways to decorate a room, make it more voluminous and spacious. Light walls, large window openings and the presence of glass surfaces in the house can radically affect the visual expansion of free space.

High beautiful doors in the interior - a special style of modernity!

Most often, the ceilings of typical apartments have a height of no more than 2-2.50 meters and it seems that such a limit does not allow ordering the length of the doorway higher than usual. Our creative designer Irina Romanova and a team of her professional colleagues will be able to prove to the customer that everything is fixable and there are no boundaries for modern design reincarnations!

Tall new interior doors to the ceiling, custom-made - will decorate any interior with dignity! To install such a canvas, the master cuts out a high opening, decorating the upper wall with an effective ceiling molding or curb. The design of the high door in the interior of the apartment can be made sliding with a "compartment" mechanism or with a cassette box that allows you to hide the canvas inside a special niche covered with plasterboard.

High exclusive doors from floor to ceiling will help to give any room an elegant and spectacular look, add light, space and air to the room. The mobility of such structures will ensure the creation of an ergonomic interior and save the useful area of ​​your home.

If the room requires reduced light insulation (nursery, bedroom), it is necessary to order high, but opaque interior doors to the apartment - made of wood, plastic, metal, tinted glass, etc. This option will visually increase the area and height of the ceiling, but create a comfortable darkened atmosphere for sleeping or relaxing.

Stylish design of doors in the interior under the ceiling from the studio of Irina Romanova

1. Doors-partitions
Monolithic concrete walls between the kitchen and dining room, living room and study significantly hide the square of the room and free space. We propose to use in such cases interior glass sliding partitions that combine different living areas into one functional room.

2. Door in the form of a window
Tall transparent door designs allow sunlight to fill the room beautifully, illuminating it from different angles. The glass sheet can be supplemented with dense curtains (roller blinds, blinds or fabric). Such a design of doors in the interior allows you to effectively simulate a large number of windows and change the layout of the house in different variations.

Let yourself be updated with professional designers!
Our studio is ready for any extraordinary solutions of our clients!

Choosing interior doors is not as easy as it might seem. What material and what type of construction to choose, and how to correctly fit the door into the design of the room - read our detailed article. A selection of the best photos is attached.

Interior doors, of course, are an extremely important design element of any room and apartment as a whole. After all, it is the doors that connect the two spaces that should be in harmony with both rooms, regardless of whether they are made in the same general style or are inspired by completely different ideas.

So, when in the process of renovation you are faced with the question of choosing interior doors, you should pay attention to several basic rules.

1. Naturally, doors made from natural materials are ideal. We will not tire of repeating that good material is not only an aesthetic choice, but also the basis for the longevity of a particular design element, and this indicator can more than recoup the costs. When it comes to choosing interior doors, the best choice is solid wood or natural veneer doors.
2. High-quality coverage is another point to which you should pay close attention. It is a high-quality coating that will help extend the service life of the door without losing its attractive appearance. In addition, a high-quality varnish or laminate is also a matter of health!
3. Pay attention to the fit of all door elements: there should not be any extra gaps at the joints of individual parts, such as grills, frames, glass inserts or other materials.
4. Correct geometry is what matters! Only minor discrepancies of a few millimeters are allowed, otherwise you risk in the future to get certain problems with installation and operation.
5. Remember that the door frame must be with a seal, and if glass is used in the decoration, then it must be of sufficient quality to withstand all the operational moments with dignity!

​

Determining the material

Fiberboard

Doors made of fiberboard, or in other words, fiberboard, are a relatively cheap option. Unlike chipboard, which include formaldehyde resins, which eventually emit toxic fumes, fiberboard is a more environmentally friendly material. It is a slab made of pressed wood dust, wood particles in which are steamed during the manufacture of the slabs, and therefore they speak of production by the method of wet pressing.

Do not think that fiberboard doors in appearance resemble the back walls of Soviet wardrobes. In the production of doors, fiberboard is ennobled by pressing with special dyes. In addition, the material goes through the so-called strengthening process, which also positively affects its external and functional qualities.

In general, fiberboard doors are a good economical choice with a number of other advantages: fiberboard doors are moisture resistant and strong enough to last you a long time.

MDF

MDF is an excellent compromise between product price and quality. Not only is MDF an environmentally friendly material, but on top of that, it has an excellent texture that allows you to make any carved elements from it. Therefore, if you want a door with an interesting decor, MDF will perfectly cope with this task.

MDF can be an excellent "filling" for an interior door. In this case, the external finish can be made, for example, from natural veneer. If you are considering more budget options, then you can opt for a faux veneer finish or lamination.

In addition to the advantages associated with possible design delights in the performance of the door leaf, MDF has other advantages, including:

• moisture resistance;
• durability;
• practicality;
• resistance to deformation.

Solid wood

If you want the doors in your apartment to look expensive and noble, to serve you for a long time, and at the same time you are ready to pay the appropriate price for this, your choice is solid wood interior doors.

A wonderful natural material, wood, has a number of advantages:

• the strength of the door structure;
• excellent adhesion to finishing materials;
• reliability of fasteners;
• environmental friendliness;
• high quality;
• wealth of design options.

But, unfortunately, this material is not without its drawbacks:

• each door made of solid wood is in a certain sense universal, since the pattern of the tree is unique;
• low resistance to temperature extremes and moisture (high-quality coating and proper care are required);
• high weight of the structure, which requires the use of extremely reliable and sturdy fittings.

Most often, in serial production, the surface of solid wood doors is covered with thin sheets of natural veneer - to improve moisture and heat resistance and increase the service life. Veneered wooden doors cope with this task perfectly!

Glass

Many modern styles, such as hi-tech or minimalism, do not overly favor natural materials such as wood or artificial imitation of wood canvases. The futurism of such styles dictates the choice of completely different materials - metal, plastic, glass.

And if metal doors are not the best choice for dividing rooms, then glass doors, on the contrary, do not look pretentious and somewhat simplify and facilitate. The matte surface makes them easy to fit into any room and use, including, and as a door for and.

In addition, the possibilities of decorating glass canvases are multifaceted! The combination of frosted glass with ordinary glass, stained glass windows, sandblasted drawings - all this will help you choose a truly unique door for a unique interior!

Choosing the design of the interior door

There are a large number of options for interior doors, including classic swing doors, and more interesting designs - sliding or folding. All the details are below.

Swing doors

Swing doors are the simplest and most familiar type of doors. The structure of such a door consists of a door leaf and a frame. But even such simplest doors currently boast some variety of options.

A similar design and type of opening is currently used everywhere: both as interior doors and as entrance doors.

Sliding doors

Such a currently popular type of door designs as sliding doors came to us from Asia, where they have been used since ancient times. Their main advantage is ergonomics.

The structure, however, is a door leaf, which is attached to a guide with rollers installed inside a bar attached to the wall. The rollers are attached to the top of the door with a special bracket.

Sliding doors are able to fit into the smallest room, allowing you not to save precious meters.

Let's highlight the main advantages of the sliding type of opening:

• saving space, which allows you not to waste space in an irrational way;
• safety of the structure;
• stylish and fashionable design.

The main disadvantages include low sound and thermal insulation, as well as a higher cost in comparison with classic sliding doors.

One way or another, sliding doors are a stylish and modern version of interior doors. We invite you to familiarize yourself with interesting examples in our photo gallery:

Sliding doors

Sliding doors belong to the subgroup of sliding doors, however, they differ somewhat in design from the classical type, and therefore we have identified them as an independent group.

The design of such doors is akin to classic doors. But, of course, interior sliding doors differ from cabinet doors in weight and strength. In addition, do not forget about the presence of a handle and a lock.

Sliding doors are more ergonomic than classic sliding doors due to the fact that the sliding doors not only move to the side when opened, but also overlap.

Sliding doors

Another interesting type of sliding doors are doors with a sliding mechanism. Such designs are perhaps the most ergonomic option possible, because the sliding of the opened door does not occur along the wall, but inside it!

In this case, the wall is made of plasterboard, and requires partial redevelopment for mounting a U-shaped groove in the wall. The groove is best made of metal.

When installing a sliding door, do not forget about the correct position of the handle!

Such a door looks very interesting in the interior of any room and has the useful property of tightness in comparison with a conventional sliding door.

Roto doors

Roto doors are a kind of compromise between swing and sliding doors. The peculiarity of the roto-door is that during the opening process the door leaf turns slightly and in the open position it becomes perpendicular to the doorway.

This type of opening allows an open door to take up less space and, like the design of a sliding door, it serves to save space in a small room or.

Roto doors have such advantages as soundproofing and airtightness, and are the perfect solution for the bedroom!

Folding doors (accordion doors)

An interesting design solution is the design of folding doors.

An accordion door can perfectly fit into the interior of a living room or bedroom, as well as become an excellent option in terms of space zoning (for example, separating the bedroom from the dressing room).

Wood or plastic is often used as a material in the manufacture of accordion doors, but other options are also possible.

The design of a folding door is a connection of several elements using movable hinges, and one of the ends of such a door is equipped with rollers moving along a guide, as is the case with a classic sliding door.

The nuances of choice and design tricks

A single style or a riot of variety?

When choosing interior doors to an apartment, we are faced not only with the choice of material and type of opening, but also with the choice of style, which, as often happens, should "combine the incongruous." What is it about? Let's tell you more.

If you are making repairs in a separate room and together with the interior design you want to change the door, you are faced with a task: how to choose a door that would at the same time fit the new interior of the bedroom or living room and fit into the corridor? However, this question also haunts those who create a design project for the future apartment.

After all, it often happens that completely different styles coexist on the same living space in different rooms! A bedroom in the style of delicate Provence, a living room in the Art Nouveau style with its natural motives, a laconic kitchen in the style of minimalism and a retro hallway - and each room has its own requirements not only for furniture and interior design, but also for the door!

Of course, if you plan to choose a single style for decorating an apartment, then you won’t have to puzzle over how to fit the door into two interiors at the same time. If you decide not to go the easy way, then we can advise you to make custom-made interior doors - so you can arrange them on the one hand to match the design of the hallway, and on the inside - choose a finishing option that is more suitable for the chosen style of the room.

You can also choose doors in neutral colors and neutral designs, which will allow you to fit them into any interior of your choice without any questions!

High interior doors

We are accustomed to standard doorways, which on average do not reach the ceiling 30-50 cm (depending on the height of your ceilings). However, designers are increasingly offering us interesting concepts using high doors in the interior - literally from the floor to the ceiling! What are the advantages of such structures, in addition to the unusual design solution?

• High doors can visually enlarge the space of a small room and "raise" the ceilings.
• A wealth of choice of style solutions and shades can easily highlight the individuality of your design.
• The originality of the appearance does not even need comment. Such doors are unusual period.

Self-installation of interior doors

Do-it-yourself installation of interior doors is not the easiest process, which, however, allows you to save a lot during the repair process.

Of course, the nuances of assembly and installation directly depend on the type of construction you choose and a universal algorithm suitable for any case cannot be identified.

We have tried to collect for you video tutorials on installing various types of interior doors, so that this process will give you as little trouble as possible! So, we suggest watching the video:

Installation of swing doors:

Installation of sliding doors:

Folding door installation:

Installation of rotary doors:

Consider a few of the simplest ways to decorate interior doors with your own hands using materials at hand.

As you know, doors are not eternal, and anything can happen. For example, scratches, chips, cracks often appear on the door leaf. In this case, you can make repairs, replacements or carefully decorate, hiding all defects.

We paste over the door with wallpaper

To decorate the door, you can use not only paper, vinyl and non-woven wallpaper, but also fabric or liquid.

In this case, the canvas should be prepared by removing the paint layer in advance, filling the irregularities, cracks and sanding the surface.

A layer of primer applied will provide additional adhesion of the wallpaper to the door surface.

Wallpaper can be pasted over both the entire canvas and panels, cutting out pieces of wallpaper of a suitable size. Do not forget to choose the glue suitable for the type of wallpaper and dilute it according to the instructions.

Classic wallpaper

We grease the cut wallpaper with glue and apply it to the door, making sure that no jams and distortions form. Smooth the wallpaper with a soft cloth, roller or wide plastic spatula. The excess is carefully trimmed with a clerical knife. Additionally, you can decorate it by gluing a frame made of foam plinth over the wallpaper.

For the period of drying of the wallpaper, it is advisable to close the windows in the house and exclude the appearance of drafts, a sharp drop in temperature.

Textile

The door decorated with fabric looks very unusual and attractive. In addition to standard surface preparation, attention should be paid to the fabric itself, finding out the degree of shrinkage.

Cut off a small piece of fabric, measure its dimensions, moisten with water and dry. After drying, we again make measurements, comparing the readings and finding out the degree of shrinkage. If the value is large, then we also moisten the entire piece of fabric before decorating and leave it to dry.

Note! You can use not only a single piece of fabric, but also cut pieces of different colors and textures. This technique is called "patchwork" and is often used by designers in the design of premises.

Casein glue, composition based on CMC, as well as “Bustilat” or “Gumilax” mastic is best suited for fabrics. Apply the adhesive to the fabric and apply it to the door, smoothing it with a spatula. When pasting the door with fragments, it is important to monitor their geometricity, otherwise the work will look sloppy.

Additionally, you can decorate the door with beautiful furniture nails, shiny nylon or leather cords, fabric paint, baguette frames.

- are universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. In this case, you do not have to bother with the cutting of canvases. However, it will not be possible to expose the door to moisture. Therefore, this method is unacceptable for decorating a door in a bathroom or kitchen.

For work, you will need a dry wallpaper mixture, several spatulas of different sizes, a hopper gun, a roller, transparent varnish, color scheme.

We decorate the door with a mirror

A very unusual door finish can be done using mirrors. Such decor will not only attract everyone's attention, but also visually expand the space of the room, add light. However, cutting and fixing a classic glass mirror is very inconvenient, since there is an alternative - acrylic panels with amalgam, which has excellent reflectivity.

Acrylic mirrors are available in a wide range of colors. You can choose any shade you like or several to make a mirror panel. Plastic panels do not break, are easily processed and attached to the door, and are lightweight. The cost of mirrored plexiglass is not the lowest, but the quality and aesthetic qualities are fully consistent with the stated prices.

Before attaching the mirror plastic on, you should carefully level the surface by deepening the heads of the nails, sanding and filling all the irregularities / grooves with putty.

A deep penetration primer must be applied to the door and the back of the acrylic sheet. After it dries, the cut panels are fixed with double-sided tape and assembly glue. For convenience, use mounting suction cups, with their help it is much easier to neatly glue the panels to the door leaf.

As one of the decoration options, you can consider curly acrylic mirrors. Such a mirror can be attached in the center of the door or you can purchase several elements and arrange them beautifully. Usually small parts are produced with an adhesive layer already applied.

Even from such a simple material as buckwheat husk, excellent work is obtained. The cost of the material is minimal, but the service life of such a coating, unfortunately, cannot be called too long.

Step 1. Remove the layer of old paint from the door, the existing vinyl covering, remove all irregularities with putty.

Step 2. Remove the door from its hinges and place it on the floor / stools / table. We paint the door leaf with dark brown paint. If there are glass inserts on the door, we protect them with masking tape.

Step 3. Densely grease the dried door with PVA glue, spread the husk, distributing it with your hands. Add fine gold sparkles if necessary.

Step 4. We cover the door with a transparent varnish (glossy or matte). It is advisable to apply three layers in order to properly fix buckwheat on the door leaf.

The beautiful door is ready. To prevent the door from knocking out of the overall design of the room, decorate the picture frame in the same way and place the creation on one of the walls.

Decorating the door in vintage style

Vintage is sophistication and sophistication, the beauty of artificially aged things, in harmony with the chic of individual decorative elements. A door in vintage style will become a work of art, an exclusive element of the interior.

For decoration you will need:

We will combine door painting with decoupage technique and add decorative elements in addition. We will carry out the work on the door, already removed from the hinges, putty and carefully polished, laid horizontally.

Step 1. Paint the door white. Apply the paint with a wide brush with stiff bristles in one direction, in a thin layer.

Step 2. When the paint is dry, we carefully grind it with coarse sandpaper, achieving the effect of "antiquity".

Step 3. Let's start decorating the panels or the central part of the door. We tear music notebooks and old newspapers into small pieces with our hands. Draw a rectangular or square activity field on the door with a pencil. Lubricate the outlined areas with PVA glue. Immediately lay out the paper randomly, smoothing it out with our hands. Apply transparent varnish on top in two layers.

Step 4. Along the perimeter of the areas covered with paper, we attach a black baguette with mounting glue.

Additionally, you can decorate with a beautiful wreath, a large lace bow or plastic beads imitating pearls (on an adhesive basis).

There are many other ways to decorate doors. Operate the materials available in your home arsenal, use your imagination and create your own masterpieces.

Entrance door prices

Entrance doors

Video - Variety of ideas for decorating doors

Video - Patina on the door

Video - DIY door decoration

11 best manufacturers of interior doors

El'PORTA doors

El'PORTA doors- these are doors with Italian architecture, made in Russia. Models of modern design and trendy colors, materials of the highest quality. El'PORTA interior doors are manufactured using modern Italian and German equipment. Various decorative door coatings allow you to choose the best option in terms of price and performance.

Specifications:

• 3D-Graf is a high density structural decorative material. Differs in a pronounced texture, average wear resistance;
• eco-veneer is an anti-vandal decorative material that imitates a cut of a real tree. High wear resistance, resistance to mechanical damage, fading, moderate resistance to moisture;
• aqua doors - doors that are not afraid of moisture;
• enamel is a multilayer material that imitates enamel, but has higher levels.

EL'PORTA doors

- each product is an effective combination of the priorities of modern materials, reliable fittings, successful construction and design solutions. Such doors are very appropriate in rooms decorated in modern high-tech or minimalist styles.

Specifications:

• modern innovative coating Renolit (Germany) stands out for its strength, durability and environmental safety;
• undemanding care. It is enough just to wash it occasionally with ordinary furniture care products (not containing abrasives);
• doors can be installed in any room, even with high humidity;
• convenient in operation, as well as durable and reliable.

- stylish minimalistic design will appeal to the modern city dweller. A wide choice of textures and finishing options allows these doors to harmoniously fit into the new, as well as into the already finished interior. Telescopic door molding is a constructive solution of a door frame that allows you to fit to a wall of any thickness.

Specifications:

• Due to the telescopic effect, the structure is suitable for walls of any thickness. Thanks to a tighter fit to the wall, the box does not warp over time;
• harmless material based on polypropylene;
• a spliced ​​massif of Angarsk pine is used in order to ensure the stability of the frame, low weight of the canvas, as well as the environmental safety of consumers.

- Sofia doors are an author's, designer's product, impeccable European quality and prompt service. The Sofia factory carries out a full cycle of product creation, from the development of the design of each door collection with Italian designers, and the development of manufacturing technologies with German engineers.

Specifications:

• door painting based on safe acrylic-based components used in the medical industry;
• absolute precision of execution of all joints in the most unusual collections;
• careful selection and research of the materials used;
• ecological, strong and durable in operation.

- The Design by ARTDEKO direction is interior doors for true connoisseurs of beauty and comfort. Warm shades of natural wood, exquisite shapes, luxurious decor of classic doors will become a real decoration of the interior. The technological effectiveness and laconic forms of doors in a modern style are an example of high design for adherents of minimalism.

Specifications:

• veneer is used from valuable wood species, such as oak or ash;
• inserts made of transparent, frosted, colored or patterned glass;
• are manufactured on high-tech equipment by qualified specialists using high-quality raw materials and materials.

- this type of door construct is a collapsible structure of separate elements (tsarg). The main advantages of this construct are its high maintainability, due to the ability to replace any part of the door during operation and a huge range of different models, both in modern and classic style.

Specifications:

• resistance to chemical and physical influences;
• a feature of the coating is its pronounced deep "brushed" structure with a glossy lacquered monochromatic surface or a matte lacquered monochromatic surface;
• complete with German Simonswerk hinges and German KFV lock.