The balcony door made of plastic does not open. Is it possible to open a plastic window from the street and what is needed for this

Whoever has small children, it’s a matter of life, she was closed by her son on the balcony, it’s great that the child was not frightened and after a short conference with him through the glass, successfully turned the handle of the balcony door, was able to catch the moment and enter the apartment. But the balcony door was wooden, everything was simpler there, the handle was placed low. With the plastic one, everything is more complicated, the handle is placed in the middle, the child can simply reach and pull it down, but he will not always be able to return it back. The locking subjects (pins) stand in several places, it is unrealistic to squeeze them out without damaging the fittings, or to open them with a plastic card or knitting needles, as recommended on the forums, these are all empty words.

Conclusion - no, it is impossible, if only to break a double-glazed window or knock out a sandwich panel, if it is present, there is a double-glazed window on 100% glass.

If someone often goes out onto the balcony to smoke, install a false handle (petal handle) on the plastic door.

Exchange with an additional payment of a privatized room for a separate apartment Notarization is not mandatory from the point of view of the law, only if the parties themselves wish to certify the transaction with a notary.
Apartments on the waiting list This is the notorious 33 sq. m for a lonely person and 18 sq. m for each family member of two or more people. The amount of the subsidy depends on a number of factors: the footage of the apartment, the number of family members, the time spent in line.
How to make a long-burning boiler with your own hands The pipe should protrude above the level of the drum, allowing fresh air to flow through the distributor for combustion. The blower pipe must be equipped with a damper, which will also serve to regulate the intensity of combustion.
Reviews Hotpoint-Ariston HBM 1201.4 It freezes well. Awful noise, constant crackling when gaining power and when contacting a service, the manufacturer claims that this is the norm. The most disgusting thing is not even that the refrigerator is broken, but that neither the service center nor the store is even trying to help you.
Replacing the water pump with your own hands The water pump is located in the front of the machine, in order to change it, you will need to spin a large number of machine blocks.
How to open a fort without a key? Opening hinged and internal locks Move the pick gently until you feel that all the pins are in place. Then turn the tensioner in a suitable direction and ... the fort will open up.
Cylinder constipation
Open the door without a key There are quite a few offers on the Internet for the sale of universal keys, which are organized for any type.
If the situation has developed so that it is not possible to open the lock, then you will be able to knock down the door impulsively. Before that, warn the people outside the door that you are going to knock it down. Accentuate the blow next to the castle, strike with the fifth.
The keyhole is the most vulnerable point of any lock
However, there is one main aspect to this.
How to open without a key hanging fort txt How to open a fort without. The hinged fort is a rather complicated mechanism, so it’s so. And it’s not easy to open this kind of constipation without an appropriate key. If you have forgotten the key to your own hinged lock and are sitting at a can of cola thinking about how to open it.
5 methods to open an interior door lock without a key Figure 4. A screwdriver is required to open the latch lock.
If the interior door is equipped with a latch lock, it will also be easy to open it (Fig. 4). It is necessary to tighten the bolts with the help of a screwdriver and remove the outer cover.
How to pick locks Therefore, if you are not completely convinced of your own abilities, we advise you to contact the experts. If you need to pick locks you can
get a 10% discount
How to open a bastion without a key? Drill out the bolts securing the bastion to the gate.
But there is also a version of this method with a clip from the cap for the right hand and a hair clip. There are situations when the key is broken, but part of it sticks out of the keyhole.
Lomik
Screwdriver
Drill
Sequencing
Removing the key with a jigsaw file
The first step is to
pull out the broken key
from the keyhole.
Open Hinged Bastion APECS Keylessly - YouTube Kosobu / Shutterstock Padlocks, barn locks appeared several thousand years ago and are actively used today. Therefore, with the help of the material at hand, you can turn the same thing. Lockpicks allow you to easily and quickly open almost any bastion without a key.
Hardware of German production Wurth is used in the doors of Elbor. To complete this action, you will need quite ordinary and improvised means.
Until the moment, as it can be urgently useful, the spare key cannot seem at first glance to be something significant. If you have ever lost your keys, stolen them, or accidentally locked your car with the keys inside, you understand how difficult and embarrassing it is to try to open a door without a key. So how would you open your own car without a key? Or your apartment door?
How to open a door without a key? True, this is unlikely to work with an iron door.
For English locks, use is made of unusable, the door is pushed into a small hole between the door itself and the partition, and pulled. You need to pull with all your might and to the accent. But it can damage the door, but it helps many times.
How to cut a padlock To implement it, you can use a metal saw (hacksaw) or choose an option much faster and more convenient - an angle grinder (grinder) using a circle for cutting metal.
How to open a constipation without a key? They think that their apartment was robbed, they want to call the police or do some identical things. And then it turns out that the key to the fort was in the wrong pocket, but it remained hanging on a hook at home.
The door lock should be opened in the same way as the hanging one. Now you understand how to open a zip without a key.
In this case, it is necessary to drill a cylinder with the help of the drill and remove the "larva". I understand that it is a very short time to judge, but there are no complaints. Agree, a very low price for a product of this class? If outside, then hacking it is very difficult.
How to open a pendant lock without a key How to open the pendant without a key? Every mortal gets into one from time to time.
(Opening locks with master keys is a very lattice science). part of the key. Now we will consider the other types of locks, master keys for them and methods of opening without master keys.
How to open a garage without a key, while throwing the gate intact and not ruining the lock? Another way to open the garage is to cut the lock with a grinder or destroy it with a scrap of the door. These are the most inexpedient methods, when they are used, considerable damage is caused to your budget, and precious time is lost for the subsequent restoration of the garage.
How to clean plastic windows streak-free The use of cleaning agents in this case is justified - soapy water will cope with muck and dust stuck in the mesh much better than just clean water.
For the local, to rinse the outside of the windows, you need to remove the dirty layer on the first run.

Often the nets are coated with varnish or paint.
It is almost impossible to break open a window with bars.
Decorates the exterior of the building.
You can order a unique drawing based on a separate sketch.

But, to the suffering, far from all manufacturers install a lower hinge on the windows with a pressure setting.
In this case, you will have to adjust the clamp on the hinge side with "scissors", "hidden clamp" and a pin on the "middle lock".
And at the same time the freshest air enters the window.
If there are children in the apartment, pat about the handles. Otherwise, you might end up on a balcony with a covered window. The handle can be locked with a removable key, or the handle itself can be removable, which is inserted into a socket hole. This will protect you from being locked inside.
Types of plastic windows. In such a window, the sashes open inward. The advantage of such windows is that you will be able to wash such windows from the outside without dilemmas.
Thus, you will protect the mechanism from early wear and damage.
If the handle of a plastic window unexpectedly breaks, you cannot close the window completely. But almost anyone can fix this dilemma. To do this, do the following:
How to open a bastion without a key? We open the outbuildings and interior forts How to open a leveled bastion if it is built into a wooden door? To do this, push down on the door and, as far as is obvious, pull it away from the box. Then, with the help of a paper clip, screwdriver or any other tool, move the levers.
Open the door without a key What you need to pick and eviscerate a lock
When opening a variety of locks, we need tools at hand, for any lock we need our own tools, but usually this list is very similar for the bulk of cases.
How to open without a key the hanging lock txt An interactive guide to picking locks. In life, everyone can happen - you have a constipation jam, a key is lost, or you need to get into a closed nest, but you don't have the key with you. In fact, opening the suspension lock is very simple. With a nail puller, pull out the eyelet into which the constipation is inserted, and if on the self-tapping screws, unscrew it with a screwdriver.
How to pick locks Opening forts with a cruciform key
A high-quality Phillips screwdriver is useful for opening such a constipation. The soft material of the pins makes it possible to cut them, then we just have to turn the mechanism:
Opening of crossbars
How to open the front door without a key: if there is a need You need to catch them on the protruding edge of the broken key, carefully turning it in the direction where the key turned when opening the door.
After opening the door, you need to drag the key towards you.
Open the APECS outboard fort without a key - YouTube And to open this kind of constipation without the appropriate key is quite difficult. There are many different padlocks.
Such a nuisance may not happen entirely by accident, but through the fault of ill-wishers. All the methods mentioned do not require special skills; there is practically no sound from their application.
Open Elbor safe without a key ZANDER. Professional catastrophic opening (picking) of any locks.
Selling picks for gutting cars (Lishi). As soon as SMARTTRAP feels any manipulation inside the bastion, it will simply cover the key with a special blocking plate.
You can buy an inexpensive kit online, but if you don't want to spend money or don't have time to wait, there are several methods to make your own lockpicks.
Method # 3: use paper clips
HOW to open the pendant combination lock how to change the password on the code. True, it’s not an incident that when you leave, you will be able to thaw it, wood swollen from dampness takes time and agreement to return to its original state.
How to open a door without a key? Sometimes it works, but this work is laborious, because the gap is small and it is difficult to make the correct movements.
How to cut a padlock Home »Apartment and part» Other
According to statistics, keys are in the first place in the list of things no less lost by people. If the key is lost, and there is no time to select the newest one, or there is no time to search for the old one, you can resort to a more radical method of removing it - cutting it down.
How to open a constipation without a key? If you are seriously interested in picking locks, then you will need more complicated toys than a regular screwdriver. Lost your house or office key? The door slammed, and you were left standing in the hallway in your slippers?
How to open a padlock without a key? The range includes products suitable for any kind of doors: aluminum, wood, light iron and even armored. After opening, the polymath will offer you to replace the lock.
Latch drilling is also one well-known criminal autopsy method among burglars.
How to open a suspended lock without a key A funny video about how bad locks are easily broken. 2 | Tags: hanging constipation, opening locks, How to open a constipation without keys, video. Using an ordinary paper clip, you can open a huge number of locks and latches. How to open a lock without a key in a few seconds. (with a can of coca cola).
How to open a garage without a key, while leaving the collar intact and not ruining the lock? Specialized companies have everything for this: the appropriate tools, experienced craftsmen, time and, ultimately, additional resources to perform the opening of garage forts.
Opening of closed outbuildings Benefits of aiding Yudu
Several provisions should be highlighted that will prove the benefits of complicity with our portal:
A disaster relief call can be made at any time of the day;
How to open an outboard fort without a key Naturally, other types of constipation cannot be opened in this way.
Opening the door lock without damaging the door! Company ... After lowering the hinge on the door closing button, tighten it and pull it up.
Hinged code bastion cipher change - YouTube Pushbutton locks have panels with iron buttons. Here are two methods to open the hinged code bastion: Pull the bow of the lock towards you so that the bow pushes the wheels. If such a bastion is buried, and the code is forgotten or lost, then push the wheels and try to turn them.
How to clean plastic windows streak-free And the next call, to achieve the best result, you can already use any suitable means.
It is recommended to wash double-glazed windows with a special "scraper" - a device for washing windows with various attachments.
Protection of plastic windows. Features of protecting windows from sons and burglary
In any case, when choosing a mesh, you need to take into account the distance between the rods. The child may stick his head with the snares and get stuck. Therefore, the gaps should not be more than 90-100 millimeters.
Protection of plastic windows from evisceration
How to adjust plastic windows To begin with, look at the coincidence of the locking rods (pins) on the sash with the bindings on the binding, as in "Adjusting the balcony door".
On the lower hinge, a screw is responsible for the clamp, which is located in the body of the part of the hinge that is on the sash.
How to open a plastic window from the outside The window must open. But all these methods are possible if there is no handle with a fort on the window. Then it is unlikely that you will be able to open the window from the outside on your own.
But professional thieves do this task well.
Types of plastic windows. Any product that has any modifications is always tried to classify. Plastic windows, of course, are no exception. There are many different models of PVC window profiles, each with its own pros and cons.
How to open a plastic window? Watch the video
How to open a plastic window?
If you mean plastic windows at home, then you need to learn the right to open them. If you do this incorrectly, then you can break the fastening mechanism, and then the window will have to be fixed.

Each modern apartment has plastic doors to the balcony. They are distinguished by many advantages: ease of use, ease of maintenance and speed of installation. A possible problem that arises after a long-term operation of the mechanism is the skew and loose fit of the sash. Therefore, it is helpful to know how to adjust a plastic balcony door to eliminate loosening due to regular opening, closing and ventilation.

Before proceeding with the diagnosis of the problems that have arisen and subsequent repairs, it is worth understanding the structure of the structure. There is a base unit as well as spare parts for a plastic balcony door. Moreover, among the accessories there are both irreplaceable and optional parts. As a rule, the following elements are included in the door block:

• frame made of PVC profiles, which are connected by special fasteners;
• a sash assembled according to a principle similar to a door frame;
• hinges, thanks to which the structure closes and opens;
• handle and latch for PVC balcony doors;
• a seal that ensures the tightness of the sash closing;
• double-glazed window of a balcony door.

In addition, the device may include additional elements that expand the functionality of the balcony door: stoppers, mechanical or hydraulic sensors and other parts.

The handle device may also differ: it can be stationary and movable, one-sided and two-sided, shell handles for balcony doors are popular. The latter option is in demand in families with children, as well as among people who smoke, because the shell handle allows you to conveniently close the door while on the balcony. For an apartment on the ground floor, a good idea is a handle with a lock - a balcony latch for plastic doors, which makes it possible to secure the balcony from intruders.

When adjustment of a plastic balcony door is required

The price of a plastic balcony door is quite high, but buying an expensive high-quality model does not save you from frequent cases of breakdowns of the mechanism. It's all about its frequent use, leading to a decrease in the tightness of the sash.

In addition, the glass unit provides excellent sound insulation and PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and the insulation of the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is firmly pressed against the door frame profile.

If everything is so, no intervention in the door mechanism is required. However, if you notice the slightest deviations, you immediately need to repair the plastic balcony doors. It is not worth pulling with the call of the master, because with each opening and closing the situation will worsen. As a result, this can lead to the balcony doors not closing at all.

Useful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch a video of self-adjustment of plastic balcony doors and fix the problem yourself.

Types of balcony door faults

If you are adjusting a plastic balcony door with your own hands, it is important to determine the causes of the malfunction for the success of the repair. The most common problems are as follows:

Fault type	Cause of occurrence
Sagging of the door (when closing, the door clings to the plastic threshold)	Most likely, the structure is too heavy, which leads to its displacement downward.
Hanging handle for balcony door	Usually the handle starts to dangle when the balcony door is opened very often.
Plastic balcony doors do not close tightly (the sash is not tightly pressed against the frame and you feel a draft)	As a rule, this is a symptom of a malfunctioning door handle or door skew.
The sash is displaced to the side (the door touches the middle of the frame)	Most often, the problem is in the hinges, adjusting them will help eliminate the malfunction. This problem occurs often due to constant sharp temperature changes that affect the fittings for plastic balcony doors in the event of insufficient insulation of the balcony

To test the door for tightness, slam a regular sheet of paper with the flap. Try to drag the sheet around the perimeter of the door. If it moves easily, the structure has lost its density and needs to be adjusted.

Also evaluate the tightness of the gasket pressure: unequal gum pressure, as a rule, indicates sagging. Determining the side of the offset is simple: pay attention to the place where the seal is squeezed and check if there is a trace from the sash on it.

How to determine the skew of the door leaf

If you suspect a skewed structure, cover the sash, and then draw along the perimeter of the closed door with a simple pencil. Open the door and compare its outline with the drawn line. The presence of irregularities indicates that the door is skewed. For an accurate result, use a building level.

Let's say, as a result of measurements, you learned that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). So, everything is in order, and the door is not skewed. If the width of one strip is 12 mm, and the other is 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that from the side of the hinges the width of the strip is 3-4 mm, and from the side of the handle is 6-7 mm. Such indicators indicate a narrowing of the sash by 4-6 mm - this is a manufacturing defect, and it makes no sense to move such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will be in the shape of a barrel - this happens with an incorrect installation, when the middle of the frame is pulled to the wall more than the top and bottom. Such errors also lead to a loose clamping. By measuring the width of the sash from all sides, you will determine the correct length of the impost. The difference between three measurements should not be more than 0.5-1 mm. If the indicators differ from the norm, the length of the impost differs from the required one and causes the door to be skewed.

How to adjust a plastic balcony door: step by step instructions

To avoid mistakes or accidental damage to the glass unit of the balcony door (the cost of which is quite high), you need to figure out how to adjust the plastic balcony doors correctly. When carrying out work, it is not necessary to overpay for the master: you can adjust the balcony door with your own hands - video instructions can be easily found on the Internet.

To work, you need very few tools:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when you open and close the door, it scratches the bottom edge of the frame, this indicates a sagging of the sash. The adjustment in this case can be vertical or horizontal.

Horizontal adjustment steps:

1. Open the door wide to the swing position.
2. There is a screw near the top hinge at the end of the sash. Take a hex wrench and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws underneath the plugs clockwise.
5. After adjusting the mechanism, check if the door now closes freely. Tighten the screws again if necessary.

To understand how to adjust balcony doors vertically, do the following:

1. Raise the door straight and find the screw at the bottom of the hinge along its axis.
2. If the screw is covered with a cover, carefully remove it.
3. If you turn the screw clockwise, gently lift the door, if against, lower it.

Adjusting the pressure of balcony doors and door handle

To tighten the handle for a plastic balcony door, you must do the following:

1. Slowly and carefully rotate the plastic cover at a right angle.
2. Find the screws for the fastening under the plastic cover. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock with a special material that does not contain resin and acid. In case of complete breakdown, it is worth buying a handle for plastic balcony doors, unscrewing the screws, removing the old part and putting a new one in its place.

Useful advice! A good option is to install a magnetic latch on the balcony door. It will avoid pushing the doorknob too often each time the door is closed and opened, which will have a beneficial effect on its durability.

If it blows from the plastic balcony doors, this is a sure sign of loose pressing of the sash. It is necessary to adjust the pressure of the balcony plastic door. To figure out how to adjust the plastic balcony doors to the clamp, look for locking elements on the door leaf. They are responsible for the pressure density.

Using a key or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjusting plastic balcony doors depending on the season. It is enough to figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the hold-down in hot weather and seal in the cold season.

Sometimes the adjustment of the hinges does not help to solve the problem, and then the looseness of the clamp can be eliminated with the help of the trunnion. For this you will need. To maximize door hold-down, set the trunnion perpendicular to the profile. On the other hand, to achieve a minimum pressure, place the trunnion parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This is because the rubber seal is worn out, and any door adjustments are meaningless without replacing it. For this you need:

1. Pull out the old rubber. This is done effortlessly and you don't need any additional tools.
2. Remove dirt from the inside of the groove.
3. Place a new seal. Make sure that the side fold falls on the end of the sash.

Useful advice! To make it easier to work, remove the sash from the frame: this way, access to the rubber gaskets will be free from the side of the hinges. It is better to prefer a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the position of the door is not correct, repeat the procedure with the upper hinge.

Greetings to all blog readers! Today we will focus on adjusting PVC doors on the balcony.

A lot of my acquaintances complain that the door is blowing through, it does not close tightly and there are still a lot of other problems. I have to go and figure out what happened there.

In fact, there is only one reason - improper care of fittings and rubber bands. Every time you have to explain what needs to be done, how to take care of the door. In this regard, I decided to write instructions for each and every one, suddenly you have the same trouble and you cannot find a solution.

Today, metal-plastic balcony blocks are installed in almost every apartment. As you know, both windows and doors in them can wear out over time. Most often, it is plastic doors that need to be repaired, because in just one day they can be opened and slammed countless times.

In this case, the door weighs more than the window frame, and accordingly it deforms more easily, and sometimes it also "slips" when the structure is lowered. There is a need for urgent sash repair.

To adjust a failed balcony door, in general, the same principle is used as in adjusting the window mechanism. However, door repair has a number of characteristic properties. We will talk about the problems that may arise during the operation of plastic doors and the ways to solve them in this article.

First of all, when starting to adjust the door, you need to stock up on screwdrivers (ordinary flat and cross), as well as a 4 mm wrench for adjusting the screws on the door hinges, pliers.

Sometimes it happens that the plastic door to the balcony does not close. This problem occurs, as a rule, due to sagging door hinges or broken fittings, in particular, the lock. Deformation of the sash itself often occurs. In this case, you need to find out the cause of the malfunctions, and only then proceed with the repair.

If the door with its lower structural element, when trying to close it, clings to the sill, and it needs to be lifted, holding on to the fittings, then the sash has dropped under the weight of its weight. Due to the impressive size of the balcony doors, such a skew often occurs. If the door touches the frame in the center, we can talk about a horizontal displacement of the sash or a change in its shape.

This sometimes happens when exposed to high temperatures. Sometimes the mechanism breaks down, which presses the sash to the frame. As a result, the door frame remains slightly closed and does not lock even when the handle is turned. This problem can be rectified by repairing the pressure mechanism.

Adjustment of the balcony door fastening mechanism

If the structure sags, the upper door hinges are adjusted first.

It is necessary to fully open the sash, set the product in the pivot position, then release the fastening element from the decorative cap (basically, on all metal-plastic doors, the hinges are covered with special caps, it is under them that the screws are hidden).

After that, using a spanner wrench, twist the adjusting screw to the right several times. This will correct the crooked position of the structure and prevent it from sagging again. It happens that the sash rises, it is also necessary to tighten the hinges from below. They have top and side screws.

The door can be raised a few millimeters by adjusting the top end screw. If you turn the side screw with the key, then the sash is compressed or, on the contrary, moves away from the opening.

Thus, sagging is eliminated by rotating the adjusting screws on the hinges in the lower and upper parts of the door leaf. They are designed so that the sash can be slightly displaced in one direction or another.

What to do if the blade touches the frame when opening

In this case, the door may touch the frame with its upper border. This indicates that, while adjusting the sag, the sash was displaced to a greater height than necessary. It is easy to fix this problem: it is enough to make a single turn of the end screw in the lower loop. Sometimes the door cannot be closed completely, and the resulting gap allows cold air to pass through.

Change the sealing material to avoid drafts. To do this, we purchase a suitable seal on the building market or in the store.

Using a screwdriver, we release the groove from the old profile, then clean it from the dried glue, wash it with a damp sponge or cloth.

Then you need to let the groove dry, then apply a layer of glue and attach the new profile with the fastening side. In this case, the cord or material for insulation should not be pulled. It must be gently smoothed out with your hands or with a special copper tube with a bent end. The ends of the profile must be glued firmly.

So that the owners of balconies do not have to frequently change the cord for sealing in the future, it is recommended to process it with a special silicone mixture. Grease silicone is usually available from your balcony unit system supplier.

Particularly noteworthy is the handle for the plastic balcony door.

Deformation of locks and fittings is a fairly common problem. Sometimes, the doorknob does not make a full turn and force is required to do so.

Such a malfunction is eliminated by applying horizontal door adjustment. In this case, it is possible, especially before the start of the cold season, to squeeze the door leaf more tightly in the direction opposite to the hinges. This is fine.

However, in spring it is better to reduce the force of the clamping flap mechanism, since this breaks it faster, besides, the sealing profile is erased.In situations of severe damage to the handle, it is better to replace the deformed structural element with a new one.

If the handle is loose and turns too easily, turn the bar at the base 90 degrees. There are screws underneath that must be tightened. This simple procedure will quickly solve the problem.

In order to check whether the balcony door has been adjusted correctly, we will try to close the sash. If this happens easily, with a slight pressure on the handle, it means that the adjustment is done correctly.

Breakage of the castle

The door frame locking mechanism keeps the leaf closed. With frequent use, it breaks down and requires replacement.

The lock is screwed to the end of the product with screws. You just need to unscrew them, pull out the old balcony latch for plastic doors and screw on the new one.

Elimination of microdefects, scratches and chips

Over time, small cracks and damage may appear on the surface of the balcony door. To get rid of them, use a special mixture called "Cosmophen" or any other component similar in composition. It should be applied to visible areas with defects and wait for the surface to dry.

After that, a special substance is also applied to the chips - plastic in liquid form. For laminated doors, a wax pencil or the so-called furniture stroke is suitable. Sometimes, repairing a balcony opening can only be done by contacting a specialist.

This applies to such defects as the appearance of cracks and chips in the glass unit, holes in plastic, destruction of welded seams. This could break the door hinge mechanism. In some cases, it is even required to order the manufacture of a new door or call a repairman.

Occasionally, when adjusting the overlap, it becomes necessary to move the glass unit. The adjusting screws can be used to move the door a few millimeters. If a larger angle of displacement is required, it is necessary to combine both types of adjustment - by screws and by moving the glass unit.

The double-glazed window is fastened with sticks. They should be removed, and then squeeze blades should be placed under the glass unit, which will act as a lever, and with their help, the glass unit should be moved in the desired direction. In this case, the spring effect begins to act and the plastic door is displaced after the glass unit.

After adjustment, you need to fix the glass unit again with sticks. These fasteners are different in size for different parts of the structure, so you need to be careful not to mix them.

Fixing the balcony door

In some cases, it becomes necessary to completely remove the sash. For example, for the implementation of its complex repairs or when it is necessary to leave an opening open when entering the balcony in order to take out large pieces of furniture there.

First, remove the special cap that covers the upper loop. Then the axial rod (pin) is pressed. The pressure should be on its head, which rises above the door hinge. Using pliers, you need to hold the pin underneath, and also pull it out to the end.

The next step is that the structure is tilted towards you and slightly raised, enough 5 - 6 cm. This procedure removes the fasteners from the lower hinge, which allows you to remove the door and move it if necessary.

After a while, the sash must be put back in its place in the opening. The installation of plastic doors on the balcony is carried out in several stages: The lower hinge is pushed onto the rod for fastening with a special hole. Then the door is set to working position.

With proper pressure on the pin of the upper hinge, it will take its original position, while protruding from both sides of the hinge by 5 mm. Finally, put the decorative buttonhole attachments back in place.

Do not forget about the large weight of plastic balcony blocks.

The leaf is quite heavy. If dropped during dismantling, the hinge mechanism will break. In this case, you will either have to buy a new door, or seek help from professionals, masters of installing balcony blocks. In order to avoid such troubles, it is better to remove and hang the door, inviting yourself an assistant.

Often, the installation of a metal-plastic balcony system is identical to the installation of any standard interior leaf or sash. However, the opening method is essential here. This determines the specifics of the installation. It is carried out in stages.

First you need to remove the old floor. The next step is to clean the doorway. It is necessary to sweep away the remaining debris, wipe the sides of the hole in the wall from dust. Then you can go directly to the installation of the door frame.

Moreover, if the installation of sliding products is taking place, it is necessary to attach the guide profiles. The remaining gaps are filled with polyurethane foam, after which the door is put on the hinges. At the end comes the turn of fittings and adjustment of the handle.

As a rule, when buying a balcony door, a guarantee is issued for it. Until the warranty period is over, it is better to use the services of a wizard for installing plastic windows and doors. Some defects and malfunctions are difficult to rectify on your own.

In addition, if you additionally damage the door during the adjustment or repair process, you will no longer be able to count on the warranty and free troubleshooting.

You can set up a balcony door with your own hands if it has begun to function poorly. However, you need to approach this process wisely so as not to accidentally damage the structure. Therefore, the main thing in installing and adjusting plastic doors to the balcony is the exact adherence to technology, accuracy and care when taking measurements.

If you make a mistake somewhere during the installation process, the door may begin to bend, bend and simply work poorly. Sometimes, when adjusting the balcony door, the locking mechanism is destroyed. In this case, you need to replace it with a new one.

Source: zonabalkona.ru/dveri/ne-zakryvaetsya-plastikovaya-dver.html

When adjustment of a plastic balcony door is required

The price of a plastic balcony door is quite high, but buying an expensive high-quality model does not save you from frequent cases of breakdowns of the mechanism. It's all about its frequent use, leading to a decrease in the tightness of the sash.

In addition, the glass unit provides excellent sound insulation and PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and the insulation of the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is firmly pressed against the door frame profile.

If everything is so, no intervention in the door mechanism is required. However, if you notice the slightest deviations, you immediately need to repair the plastic balcony doors. It is not worth pulling with the call of the master, because with each opening and closing the situation will worsen. As a result, this can lead to the balcony doors not closing at all.

Useful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch a video of self-adjustment of plastic balcony doors and fix the problem yourself.

Types of balcony door faults

If you are adjusting a plastic balcony door with your own hands, it is important to determine the causes of the malfunction for the success of the repair. The most common problems are as follows:

Fault type	Cause of occurrence
Sagging of the door (when closing, the door clings to the plastic threshold)	Most likely, the structure is too heavy, which leads to its displacement downward.
Hanging handle for balcony door	Usually the handle starts to dangle when the balcony door is opened very often.
Plastic balcony doors do not close tightly (the sash is not tightly pressed against the frame and you feel a draft)	As a rule, this is a symptom of a malfunctioning door handle or door skew.
The sash is displaced to the side (the door touches the middle of the frame)	Most often, the problem is in the hinges, adjusting them will help eliminate the malfunction. This problem occurs often due to constant sharp temperature changes that affect the fittings for plastic balcony doors in the event of insufficient insulation of the balcony

To test the door for tightness, slam a regular sheet of paper with the flap. Try to drag the sheet around the perimeter of the door. If it moves easily, the structure has lost its density and needs to be adjusted.

Also evaluate the tightness of the gasket pressure: unequal gum pressure, as a rule, indicates sagging. Determining the side of the offset is simple: pay attention to the place where the seal is squeezed and check if there is a trace from the sash on it.

How to determine the skew of the door leaf

If you suspect a skewed structure, cover the sash, and then draw along the perimeter of the closed door with a simple pencil.

Open the door and compare its outline with the drawn line. The presence of irregularities indicates that the door is skewed. For an accurate result, use a building level.

Table of values ​​for door leaf adjustment

Let's say, as a result of measurements, you learned that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). So, everything is in order, and the door is not skewed. If the width of one strip is 12 mm, and the other is 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that from the side of the hinges the width of the strip is 3-4 mm, and from the side of the handle is 6-7 mm. Such indicators indicate a narrowing of the sash by 4-6 mm - this is a manufacturing defect, and it makes no sense to move such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will be in the shape of a barrel - this happens with an incorrect installation, when the middle of the frame is pulled to the wall more than the top and bottom. Such errors also lead to a loose clamping.

By measuring the width of the sash from all sides, you will determine the correct length of the impost. The difference between three measurements should not be more than 0.5-1 mm.

If the indicators differ from the norm, the length of the impost differs from the required one and causes the door to be skewed.

How to adjust a plastic balcony door: step by step instructions

To avoid mistakes or accidental damage to the glass unit of the balcony door (the cost of which is quite high), you need to figure out how to adjust the plastic balcony doors correctly.

When carrying out work, it is not necessary to overpay for the master: you can adjust the balcony door with your own hands - video instructions can be easily found on the Internet.

To work, you need very few tools:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when you open and close the door, it scratches the bottom edge of the frame, this indicates a sagging of the sash. The adjustment in this case can be vertical or horizontal.

Diagram of vertical and horizontal door adjustment

Horizontal adjustment steps:

1. Open the door wide to the swing position.
2. There is a screw near the top hinge at the end of the sash. Take a hex wrench and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws underneath the plugs clockwise.
5. After adjusting the mechanism, check if the door now closes freely. Tighten the screws again if necessary.

To understand how to adjust balcony doors vertically, do the following:

1. Raise the door straight and find the screw at the bottom of the hinge along its axis.
2. If the screw is covered with a cover, carefully remove it.
3. If you turn the screw clockwise, gently lift the door, if against, lower it.

Adjusting the pressure of balcony doors and door handle

To tighten the handle for a plastic balcony door, you must do the following:

1. Slowly and carefully rotate the plastic cover at a right angle.
2. Find the screws for the fastening under the plastic cover. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock with a special material that does not contain resin and acid. In case of complete breakdown, it is worth buying a handle for plastic balcony doors, unscrewing the screws, removing the old part and putting a new one in its place.

Useful advice! A good option is to install a magnetic latch on the balcony door. It will avoid pushing the doorknob too often each time the door is closed and opened, which will have a beneficial effect on its durability.

Schematic instruction for self-adjusting the position of the balcony door

If it blows from the plastic balcony doors, this is a sure sign of loose pressing of the sash. It is necessary to adjust the pressure of the balcony plastic door. To figure out how to adjust the plastic balcony doors to the clamp, look for locking elements on the door leaf. They are responsible for the pressure density.

Using a key or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjusting plastic balcony doors depending on the season.

It is enough to figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the hold-down in hot weather and seal in the cold season.

Sometimes the adjustment of the hinges does not help to solve the problem, and then the looseness of the clamp can be eliminated with the help of the trunnion. To do this, you need pliers.

To maximize door hold-down, set the trunnion perpendicular to the profile. On the other hand, to achieve a minimum pressure, place the trunnion parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This is because the rubber seal is worn out, and any door adjustments are meaningless without replacing it. For this you need:

1. Pull out the old rubber. This is done effortlessly and you don't need any additional tools.
2. Remove dirt from the inside of the groove.
3. Place a new seal. Make sure that the side fold falls on the end of the sash.

Useful advice! To make it easier to work, remove the sash from the frame: this way, access to the rubber gaskets will be free from the side of the hinges. It is better to prefer a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the position of the door is not correct, repeat the procedure with the upper hinge.

Prevention of malfunctions of balcony doors

If you had to build a house yourself, adjusting the hardware of the balcony doors is more important, because you want the result of your work to last longer. To minimize the risk of future problems, try to follow these rules:

• a reputable manufacturer is a guarantee of good product quality, because in terms of durability and performance, the quality of the materials from which the door and fittings are made is of primary importance;
• when buying fittings, make sure that all the selected parts are suitable for the type and size of the balcony door: please note that modern fittings are designed for a weight of 100-130 kg;
• so that you do not have to figure out how to tighten plastic balcony doors, take care of the presence of a special microlift: this compensator part prevents the door leaf from sagging under the influence of its own gravity;
• so that the door does not sag and the sash does not jam, it is worth installing a special additional bus that limits the door opening.

Useful advice! The microlift is especially relevant in the case of a two-chamber double-glazed unit, which is distinguished by its impressive weight and size. The design of the microlift can be different, representing a small lever on the side of the sash or a roller in its lower part.

Also, even at the stage of installing the door, follow the following points:

1. Along the entire perimeter of the door frame, the frame must adhere to it evenly and tightly.
2. Opening and closing doors should be easy and effortless.
3. When checking with a building level, it should be obvious that the structure is installed exactly vertical.
4. There should be no drafts.
5. If the door is installed level, in a semi-closed position it should not open or close by itself.

Remember that self-adjustment of the door is possible, however, it requires attention, caution and thorough diagnosis of problems.

Therefore, if there is a valid guarantee for the balcony door, if the slightest malfunction is detected, it is worth contacting specialists who will quickly determine the causes of the problems.

If you are sure that malfunctions arise due to a factory defect or installation problems, it is also better to contact a professional - tightening the bolts yourself in this case will not correct the situation.

If you decide to adjust the door yourself, be sure to follow the instructions, and in case of replacing the hardware, choose the products of the same company as your balcony doors.

Hide

How to open a plastic window, especially from the street side , it is not only the thief who can think about it: sometimes this problem also arises for the landlords. So, the front door can jam. This can happen for various reasons: for example, you went out onto the landing, leaving the keys in the apartment, and the door was slammed shut, or a small child locked it from the inside. Often apartment owners lose the keys to the front door, then the only way to get home is through the window. Also knowledge of how to open a plastic window , may be required if it is jammed.

In fact, products are rarely equipped with additional burglary protection and can be easily opened with a screwdriver or any flat metal object such as a ruler.

Opening plastic windows: methods and methods

Let's say the window is closed, you are outside, and you only have a flathead screwdriver. First you need to find where the latch is. You will need to gently squeeze out the sash by pressing on the fittings. If you can do everything right, the sash will open slightly, you can reach in and turn the handle, opening the window completely.

How to open a plastic window from the street using a ruler?

If you don't have a screwdriver at hand, but you found a metal ruler, you can use the following scheme: the ruler is placed between the window frame and . Then you need to find the latch, try to hook it and pull it down. You need to act carefully so as not to damage the plastic of the window. This material is quite flexible and will allow you to squeeze the ruler where you need it without any problems. If you do everything right, a window will open.

However, it should be borne in mind that they have a variety of designs, and you need to act in accordance with what kind of design you have installed. The above methods illustrate how to open a plastic window with standard handles. If you have a different construction in front of you, these methods may not work.

How to open a plastic window without a handle?

Self-opening of such a structure from the side of the street is extremely difficult. Any narrow object can be attempted as long as the window is not locked. This method will help protect the structure from damage, and it will continue to function. It may be damaged by opening. Almost always, mechanically applied scratches remain on it, less often chips.

Another way to open a plastic window from the outside is by drilling. It will harm the frame, as a through hole will appear in it, through which it will be possible to push a narrow object, for example, a wire or a handle, and open the sash with its help.

How to open a double-glazed window , without harming it - an important question for the owner of the window. Not everyone will want to change or repair after they need to get into the room. These methods are the safest for the design and allow you to maintain its functionality.

Features of outward opening windows

How to open from the outside , if the sash opens in the same direction? This question is quite interesting, since before trying to open such a window, you need to study its features.

Typically, such designs have double-sided lock-type handles, which allows them to open in the other direction. There may also be additional fittings that open the sash, for example, in ventilation mode. If there is such a function, this is good: you can try using the ruler to switch the window to this position, squeeze your hand inside and open it.

Quite often, this method does not work with this type of windows. You can try to pry them off with a crowbar or chisel, but as a result, the window will be broken and it will need repairs, since the locking mechanism will be disabled.

How to open a window without a handle?

If you find yourself outside, you can try to open the glass unit with a screwdriver or a ruler using the method described above. But it happens that such a problem finds the owner indoors. The window has no handle, it is jammed, and it is impossible to open the sash. In this case, you will still need to purchase a pen or use pliers instead.

If you still can't complete the action, look for the reason in an element called scissors. Sometimes it comes out of the grooves and does not allow the window sash to move in the right direction.

Before opening the glass unit , you will need to find a tool to remove the sash from the frame. It is more convenient to remove the hinges located in the upper part of the structure. When they are unscrewed, you will see a metal plate; remove it, remove the hinge pin, lift the lower hinge and find the grooves of the scissors. After the element is in place, the window should work.

Tip: before disassembling the window, try to get to the scissors from above, sometimes the slopes do not interfere with this.

How to open a plastic balcony door from the outside?

A more common problem is a closed balcony door. For example, you went out to smoke, and you were locked up on the balcony and not heard. There is a way out of the situation: if there is any tool on the balcony, you can try to open the door with a screwdriver. This is done according to the same principle as in the case of a plastic window.

Another way: unscrew, lift the door and open it from the other side. Or, stick your hand into the hole and turn the handle to the desired position. But this may not always help, since many doors are equipped with additional protection. If you have just such a door, then you will have to use the help of a specialist who repairs doors.

Conclusion. Opening a plastic window from the outside is not as easy as it might seem. Without knowledge of the design, the presence of at least some tool at hand and a little experience, it may not work to open a window or a plastic door without damaging the structure. If you do not want to risk it, call a window repair technician: he will help you solve the problem.

Ways to open a window from the outside

Many people believe that PVC windows are more reliable in protecting housing from penetration than old Soviet windows. However, in reality, things are exactly the opposite.

The fact is that doors made of plastic are much more flexible and softer than wooden ones, as a result of which they easily fold back. In an ordinary situation, this, of course, is a reason for frustration, but not in ours, when it is necessary to get into a locked house.

When deciding how to open a plastic window from the outside, it is worth noting that, in order not to harm the object, it is important to use a special tool.

method number 1

As from the street you can open a plastic window. Armed with a thin metal plate or iron ruler, this element must be carefully placed between the frame and the glass unit.

Your next step is to get to the latch of the plastic window. Succeeded? Then we hook it with a tool and slowly pull it down.

There is absolutely no difficulty here, because plastic is a rather flexible material that will not withstand the pressure of metal. The only drawback of this method is the possible appearance of minor scratches, or even dents.

As a result of these actions, the cylinder of the locking mechanism should jump out of the hook;
if the constipation is located on several sections of the shutters, which is most often the case, the procedure must be repeated by inserting a screwdriver opposite each of them. The moment the trunnion pops out of the hook is accompanied by a loud click.

Hacking scheme for standard fittings

This opening method is quite simple, and, most importantly, after such a hack, the fittings remain intact. The only thing is, if you do the work inaccurately, you can scratch the plastic.

method number 2

Open the plastic window from the outside with a screwdriver and without damage. Determine where the latch is. At that point with this tool, try to squeeze the window sash.

A complicated option is when there are several pins in the opening mechanism. In this case, you need to act in stages. Opposite each of the trunnions, you need to tear off the sash, pushing the trunnion behind the bar, and proceed to the next one only after the previous trunnion is fixed on the other side of the bar.

It will be possible to open it by pressing the fittings. Further, if everything is done correctly, the sash will open slightly. The next and last step is to turn the constipation knob.

It should be noted that all these methods are effective only if the window is equipped with standard fittings. But if the intruders are professionals, they can also break windows with anti-burglar fittings Rocko and Mako.

Burglary protection fittings

method number 3

Is it possible to open a plastic window from the outside by drilling. It turns out that it is possible, but in most cases only burglars resort to this method. If in the previous methods minor scratches are damage to the window, then this is more and more widespread.

So, by drilling a hole with a handle or the same screwdriver, a window is opened. Of course, this will still get you into the house, but your window structure will be damaged.

Jamming of a plastic balcony door is one of the most unpleasant breakdowns that can occur with this fairly reliable structure. It is doubly unpleasant if the door jammed when you went out onto the balcony in a light robe and slippers on your bare feet to bring some food from the balcony or just smoke. Most designs of plastic doors are not equipped with a balcony handle on the street side, which closes the lock. Therefore, it is quite problematic to close the door tightly behind you. This serves as some guarantee against getting stuck on the balcony.

Reasons for jamming

Some "reactive" owners try to slam the door behind them with a sharp jerk towards themselves, having managed to pull out their hand at the last moment. With a certain skill, this succeeds. But the trouble is that it is quite difficult to calculate the force with which it is necessary to pull the door sharply towards oneself in order for the latch to work. From hitting the box, a loose or worn handle may fall and the door lock may work. So much for "jamming".

If the door is not jammed because it was mistreated, not from a blow or a sharp slam, then the reasons should be sought in the malfunctioning of the locking or canopy elements of the doors.

There are not many of them. This could be:

• actuation of the locking mechanism of the lock when opening the door for "airing";
• door handle breakage;
• misalignment of the structure;
• freezing of the door in winter due to condensation accumulated between the frame and the sealant.

None of these reasons are fatal. Simply, if the balcony door does not close or does not open, you need to try to find out the reason, and in no case try to force it back upright or jerk it open.

The design, although reliable, can break with excessive force. Plastic after all.

Remedies

Let's start by looking at the most unpleasant option. The door is jammed when you were on the balcony or loggia. It does not open and you cannot enter the room. In this case, the main thing is not to panic, but to quickly find a thin metal or plastic tool on the balcony (knife, spatula, hacksaw blade, chisel). In a word, everything that can be used to pick up the glazing bead, which is used to fasten the glass unit in the door. After that, trying not to scratch or leave deep burrs, pick up the glazing bead on the long side in the middle and carefully, with both hands, disconnect it from the center to the edges. Do the same on the other side, and then above and below.

Having freed the glass unit from the retaining glazing bead, it can be easily removed by pulling the upper edge towards you. It should only be remembered that the weight of 1 sq. m. triple glass unit more than 30 kg. Therefore, be careful, especially if you have a solid glass unit installed at the full height of the balcony door. It can be very difficult. Having taken out the double-glazed window and carefully setting it aside, you will gain access to the door handle and the ability to open the lock from the inside, and if it does not work, simply climb into the room through a free opening.

Do not under any circumstances try to knock out the glass unit. It is strong enough, besides, the outer glass can be 4 mm thick. And such glass can only be broken with a heavy metal object. In this case, fragments are inevitable, which can seriously injure yourself. And a double-glazed window is not cheap.

If the door is jammed when you are indoors, everything is much easier. You can use the tool that you have on your farm, or call a foreman. But in most cases, a master is not needed, all the reasons can be easily eliminated with your own hands.

If the balcony door, opened for ventilation, does not want to return to the vertical position, it is enough to set the handle to the horizontal position and, having felt at the end of the door where the lock is located, just below the handle, return it to its original position (vertically). Or press the spring-loaded plate blocking the door lock and, after aligning the door vertically, press it against the door frame and turn the handle all the way down, closing the lock. Then open again. The malfunction should disappear.

A broken door handle is not actually the reason why the door is jammed. This is the result of either wear of the material from which it is made, or excessive force with which it was opened or closed. Replacing it will take no more than 10 minutes, if you have a spare one. It is enough to pull the decorative plug at the base of the handle towards you, turn it 90 ° and unscrew the freed self-tapping screws that fix the handle.

Carefully pull out the broken handle with a rod and insert a new one in its place, tighten the screws, and replace the decorative strip.

Jamming, as a result of the sagging of the balcony door, does not occur simultaneously. This is certainly preceded by difficult opening of the lock, clinging to the edge of the door frame, creak. Therefore, if you did not fix these problems in time, a jammed door will punish you for negligence and laziness.

To eliminate this cause, it is necessary to remove the decorative strips from the hinges, try to open the door by lifting it with your hands by the lower edge, or remove the glass unit in order to facilitate the structure and eliminate critical sagging. After that, using the hexagonal L-shaped keys, adjust the position of the door in the vertical, horizontal and frontal planes.

Do not forget to lubricate the door hinges before installing the decorative trims for preventive purposes.

Freezing of a plastic door to a door frame is very unpleasant. This happens in severe frosts, when the door was ajar for ventilation, condensation has accumulated on the seal. After closing, it freezes and tightly "grabs" the door.

In this case, think carefully about whether you have an urgent need to immediately open it and be on the balcony. Or with a piece of meat or dumplings stored in the cold, you can wait until warmer days.

In most cases, the cost of a piece of meat not eaten is not comparable to the cost of a broken door. But if you are really impatient, or your beloved dog freezes on the balcony, then there is only one way out. To dismantle the double-glazed window again, to free the unfortunate animal, and armed with an ordinary hairdryer and dressed warmly, walk a stream of hot air around the entire perimeter of the door, slightly pulling on the door handle.

Typically, after 5-10 minutes of such intensive warm air treatment, the door thaws and opens. After that, thoroughly wipe the door frame and the seal with a dry, lint-free cloth and lubricate the rubber seal with silicone grease to prevent the possibility of freezing in the future. Replace the glass unit.

In the warm season, a similar situation can happen if the seal or the door frame is densely covered with the traces of the hands of the prancing company (protein cream of cakes, sweet champagne or jelly). In this case, not a hairdryer will help, but a steam generator, or abundant water procedures with warm water.

If none of these remedies work, do not try to break down the balcony door. If the plastic profile bursts or the lock breaks, they cannot be repaired. Call the master. Perhaps the reason is a breakdown of the rods that activate the closing mechanism. Repairing them is beyond your power.

Let's summarize

A jammed balcony door is not uncommon. This is due to the imperfection of the design of the balcony doors, which, for the most part, are nothing more than enlarged windows. In their manufacture, careless manufacturers can use fittings that are not designed for the solid weight of the structure - 70-90 kg. Hence all the reasons for jamming.