Aluminum front panels. Aluminum Panel Aluminum Facade Panels for House Exterior Decoration

Any building needs finishing of external walls. One of the most modern and practical solutions to this problem is to install aluminum panels on the facade. This is a multilayer material consisting of thin metal plates and filler.

Aluminum panels are used in the design of industrial and public buildings, and sometimes private houses. This type of cladding has a number of advantages and disadvantages.

Let's talk more about what aluminum wall panels, also called composite, are. The upper and lower parts of the material are aluminum sheets 0.21-0.45 mm thick, with a mineral or polymer filler between them.

The total thickness of the panel usually does not exceed 6 mm, the width is 1.6 m, and the length is 6 m. Often the material is made to order, taking into account the architectural features of the building. On the inside of the panel there are special holes for removing excess moisture.

The front layer of aluminum can be covered with a special oxide film. It protects the metal surface from mechanical damage and environmental influences. The film can be transparent or decorative, giving the material various shades - bronze, turquoise, silver, etc. It is also possible to create the effect of a mirror surface, imitation of wood or stone. Read more about the properties of aluminum wall panels?

Varieties

The properties of the material and its ability to withstand external influences depend on the type of top coating and the use of various fillers. These characteristics determine the scope of the coating.

There are the following types of aluminum panels:

• facade;
• universal - suitable for interior and exterior walls, billboards, shop windows, etc.;
• fire-resistant - can be used at objects with increased fire hazard, for example, at gas stations.

Selection and application

When buying aluminum panels for the facade, it is better to purchase products that come with a profile and fasteners. Otherwise, improper fasteners can lead to deformation of the finished coating and reduce its strength.

For the design of the facade, standard material is usually sufficient. Thicker panels are needed only for buildings located in areas with frequent precipitation and increased wind loads. They are made to order.

As already mentioned, aluminum panels are a versatile material that has found its application in various fields. They are used for lining the interior and exterior walls of shopping centers, small detached buildings (car washes, gas stations, pavilions, technical rooms), for creating billboards, various stands. Sometimes aluminum panels are used in cottage construction, this is especially true if you plan to design a high-tech house. More about the characteristic features of high-tech style?

Specifications

Despite the presence of metal in the composition, the weight of the panels is relatively small - about 3-7 kg / m? depending on thickness. This allows you to use the material on almost any wall, in most cases you can do without strengthening the foundation.

The warranty period starts from 25 years, as in Alucobond facade panels, and can reach 50 years. The material withstands temperatures from -60 to +120 ° C (the range depends on the properties of the filler), sound absorption is in the range of 20-30 dB.

The sheets have good elasticity and can be bent at an angle of 180 degrees. This allows you to clad facades of complex shapes, decorate arches, make smooth bends.

Mounting Features

Most often, aluminum panels are used in the construction of a ventilated facade. Work can be carried out at any time of the year. Read more about the construction of a ventilated aluminum facade?

Due to its plasticity, the material is easy to install, but in order to get a high-quality coating, you need to follow a number of rules:

• Use a milling cutter or electric jigsaw to cut the panels, while fixing the sheet on the clamp. When fixing, the use of rubber gaskets is mandatory.
• The frame is made vertical. It is built from the parts included in the kit, the step between the profile is determined based on the weight of the material.
• Fasteners are used only from stainless steel.
• Be sure to conduct a geodetic survey of the building before starting installation. According to her data, brackets for the frame are exposed.

After installing the guides, additional thermal insulation of the walls is carried out with a suitable slab insulation. A moisture and windproof film is placed on top of it.

Next, the installation of aluminum panels is carried out. They can be mounted hidden, open or hinged. Work begins in the direction from the bottom up. In the first case, the panel is fixed on the racks with screws, the upper edge of one sheet is connected with a groove to the lower edge of the next one.

In the second version, the panels are applied with a slight overlap and fixed with screws. With a hinged mounting method, the sheets of material are fastened with bolts, there are rubber gaskets at the joints of the sheets. The latter option is preferable, since it simplifies the replacement of individual elements when repairing the coating.

Advantages and disadvantages

Aluminum façade panels are in demand due to their stylish look, in line with modern architectural trends. In addition to this, the material has outstanding technical characteristics.

Among the main advantages of aluminum panels are:

• long service life (up to 50 years);
• high class of fire safety;
• flexibility and plasticity;
• universality;
• ability to absorb noise;
• resistance to corrosion, moisture and temperature extremes;
• resistance to ultraviolet, allowing the material to retain its original appearance for a long time;
• easy cleaning with water;
• many color solutions;
• moderate weight of the material.

In contrast to the positive properties, there are several disadvantages, namely:

• The outer surface of the material is unstable to mechanical damage, especially in the absence of an additional protective coating. Aluminum panels are easy to scratch, which affects their decorative properties. For this reason, the material is not suitable for finishing areas where increased resistance to damage is required, for example, the basement of a building.
• The cost of such panels is quite high, which is understandable, since they are characterized by increased strength and belong to elite finishing materials.

Aluminum panels for the facade open up space for various design solutions. They meet all the requirements for modern finishing materials and will be an excellent choice for those who want to add style to their home. When buying high-quality aluminum panels and their professional installation, the owners can be sure that the walls of the building are reliably protected and will retain a presentable appearance for many years.

Useful video about the technology of mounting aluminum facade panels

The use of aluminum for exterior decoration of building facades has long become commonplace. In addition to durability, neatness and respectable appearance, exterior finishing with hinged aluminum systems is perfectly combined with the technology of ventilated facades. With the growth of energy saving requirements for buildings of all classes, ventilated facades are gaining more and more popularity.

Types of aluminum facade panels

Depending on the architectural solution, the height of the building, the fire resistance class of the structure, the most suitable type of aluminum panels for the facade is selected.

The design and installation of aluminum exterior trim is regulated by building codes. For each facade, based on the geometric parameters of the building, an individual project is developed.

According to the method of manufacture and application, there are several types of aluminum panels and cassettes:

• Aluminum composite panels or cassettes from a three-layer sheet, from two layers of aluminum with a plastic layer between them, from 2.5 mm to 6 mm thick;
• Aluminum panels without a plastic interlayer from a solid aluminum sheet, from 1.5 mm to 2.5 mm thick: flat or three-dimensional aluminum cassettes;
• Perforated aluminum panels on the facade;
• Aluminum ceiling panels;
• Aluminum honeycomb panels for sound insulation;
• Aluminum panels for advertising structures and signs.

The last three types of panels are not facade, so we will not dwell on them in the article.

Regardless of the type of cassettes or facade panels, their manufacture requires special equipment, including CNC machines.

Application of aluminum panels

Aluminum façade panels blend seamlessly into modern dynamic architectural style with laconic details. This finish is perfect for buildings of shopping malls, auto centers, entertainment and entertainment, as well as business centers, and even industrial buildings.

Aluminum wall panels are most often used for internal partitions or cladding, their use as an external facade decor or as independent enclosing structures is unnecessarily expensive. This niche is almost completely occupied by wall sandwich panels with an outer layer of steel.

Limitations of the scope of aluminum composite panels

The limitation in application is the destructive effect of wind loads and fire safety requirements, in particular, when erecting structures of class F1.1 and F1.2 in terms of functional fire hazard. These include:

• Preschool educational organizations;
• Specialized nursing homes and disabled people (not residential);
• Hospitals;
• Sleeping buildings of educational organizations with the presence of a boarding school and children's organizations.

When installing ventilated facades, the issue is considered comprehensively, the use of basalt insulation in the project prevents the spread of fire.

The federal law "Technical Regulations on Fire Safety Requirements" prohibits the use of aluminum panels for explosive and fire hazardous buildings of class A, B, in particular for gas stations.

Exceptional features of the use of perforated cassettes: media facade

Perforated cassettes for the facade are a new architectural trend that is gaining momentum, actively using the effect of chiaroscuro and the work of the surface through the light. The effect of voluminous media facades is achieved by multi-level and multi-plane ice illumination. The contrast of perforation without illumination against the background of blank concrete walls is also interesting.

The perforated facade is also found on sports facilities. Some stadiums in Russia have decor on the facade - perforation in the form of a running person or other athletes.

Aluminum panel decors

The composite sheet has a durable exterior painting of bright saturated, or vice versa, soft pastel colors.

The most common panels for aluminum facades are light gray silver with a metallic sheen. This color is produced by most Russian, European and Asian manufacturers. Due to the fact that the outer aluminum sheet is painted before thermal bonding of all layers, in order to order a different shade, you need to familiarize yourself with the color catalog of the manufacturer. Non-standard painting is also possible if it is planned to order a large (usually over 500 sq.m.) amount of material. Color catalogs from different manufacturers differ in the degree of gloss and shades, you should order the entire volume from one supplier. The type of surface depends on the method of applying the finishing layer:

• One-color painting is carried out on the basis of PVDF and a PE-polymer structure based on polyester varnish. Such a coating contains synthetic fluorocarbon or fluorocarbon resins of increased strength;
• For the "mirror metallic" effect, an additional layer of oxide film is used;
• The method of electrochemical anodizing achieves metallized surfaces, such a surface is often used in interior decoration to create mirror "silver" and "gold" surfaces.

The exterior finish of aluminum panels looks impressive in the form of brushing, small scratches on a dull gray background create the illusion of stainless steel.

Composite aluminum sheet for facade panels can have an outer surface imitating:

• Valuable wood species;
• Polished granite or marble;
• Fantasy non-geometric ornament.

Depending on the difference in the application of the outer coating, its service life varies:

• Polymeric PVDF and PE painting - 20-25 years;
• Chemical anodizing - 15-20 years;
• Decors with stone or wood imitation - 15-20 years.

During this period, the surface of facade aluminum panels is guaranteed not to fade or change color. The paintwork will last longer, but may slightly lose the brightness of the shades.

Aluminum panel production

The basis for the manufacture of facade panels from a solid or composite sheet is the use of an aluminum building alloy.

How aluminum sheet is produced

Aluminum building sheet is produced by hot and cold rolling followed by annealing. For manufacturing, an alloy with a high content of manganese AMg6 is used. This provides the necessary rigidity to the finished product.

Depending on the final decor, a galvanized coating up to 14 Mk thick is applied to the sheet by the electrochemical method for subsequent powder painting and applying a paint layer. In order to preserve the visible structure of the metal, an anodized layer is applied with a thickness of up to 40-60 microns, followed by protection with a special varnish.

The painted sheet is delivered in separate sheets, usually 1500x2500, 3000 mm. The aluminum composite sheet has more effective dimensions, 1200, 1250x 6500 mm, which minimizes waste when cutting. The exception is Chinese material, which is shipped by sea, its dimensions are limited by the size of a sea container.

Composite aluminum sheet consists of two aluminum alloy plates with a thickness of 0.25 mm to 0.5 mm with a thermally bonded and pressed plastic layer between them. The front surface is painted before the plates are connected to each other and is protected for ease of transportation with a protective PVC film, often with the manufacturer's logo. The film is not removed even when cutting the sheet; already finished products are released from it.

Often, with an abundance of the same size in production conditions, only cutting of blanks is performed, so it is more convenient to take out the cassettes for installation, and the final assembly into a box with edge boards is carried out directly at the facility, where a production mini-section is equipped for these purposes.

Stages of production of aluminum cassettes

The production of aluminum cassettes begins with the calculation of the required amount of material for the implementation of a specific project. To do this, the area of ​​​​all facades is calculated, excluding the area of ​​\u200b\u200bwindow and door openings. When assessing the required amount of aluminum sheet, it is taken into account that the cladding with cassettes lags behind the surface of the facade by at least 100 mm. The size of the flanging and cutting of the sheet is also taken into account.

To create a presentable look and increase the flow of customers, each company and shopping center tries to give the facade an original stylish look. Of modern materials, aluminum panels are most suitable for this purpose. They protect the walls of the building from wind and dampness. The variety of colors and 3D patterns allow you to combine and create a unique look that will attract visitors and create a company brand.

Composite panels made of aluminum and polymers

Composite wall cladding boards are simply called aluminum panels, after the outer material. In fact, the inner layer of polymers and mineral additives between thin sheets of metal is more than half the thickness. The table shows examples of the most popular aluminum panels.

Composite panels are a multi-layer structure of adhesive compositions, decorative and facing materials.

1. Transparent matte or glossy protective film of the outer coating.
2. Varnish or paint applied to a primer on the front side and a primer varnish, usually anti-corrosion on the side of the wall.
3. Aluminum rolled sheet.
4. Smoothing primer coat.
5. Glue.
6. Compressed polyethylene with mineral and other additives.

Aluminum panels work well. Therefore, in addition to painting, composite materials for walls are decorated with the help of grinding, electroplating, embossing. The finished panel can be bent. The minimum radius determines the thickness of the sheet multiplied by 2. This makes it possible to finish facades with curved walls and round columns.

They do not burn in fire, they are not afraid of water, they live long

Aluminum wall panels

Among metals, aluminum stands out for its low specific gravity and resistance to moisture. Pure metal, upon contact with atmospheric oxygen, is covered with a thin layer of oxide. This film is several microns - thousandths of a millimeter, has high hardness and completely protects aluminum from interaction with various substances. As a result, even acids with short exposure cannot damage aluminum.

Composite materials for aluminum walls have advantages over similar materials based on wood waste and polyvinyl chloride:

• do not burn and do not support combustion;
• do not emit harmful substances;
• waterproof;
• durable;
• abrasion resistant;
• lungs;
• easy to process and cut;
• decorated with thermal printing;
• suitable for finishing the facades of buildings of any configuration and height;
• service life of more than 50 years without deformation.

A large selection of colors and patterns, the ability to combine, allow you to create a unique finish for walls, ceilings and facades.

Finishing of ventilated facades of high-rise buildings and public buildings

Aluminum is not breathable. Facing is done only on ventilated facades. Composite boards protect the walls from wind and noise, even if they are only 4 mm thick. Rain and sun will not be able to penetrate the multi-layer facing material, and the facade will stand unscathed for a long time. This increases the time between repairs several times.

High strength and low weight have made aluminum composite slabs an excellent material for finishing high-rise buildings. The sheet is simply attached to the wall with self-tapping screws and with the help of clamps and clips. You can just nail it through with nails. In this case, expansion washers and spacers are used to provide a ventilation gap between the wall and the slab.

Hinged facade structures are mounted on a special galvanized profile. This method allows the team to make the cladding of a multi-storey building in a few days. I make a private house with aligned walls with an assistant in 10 - 12 hours.

Created for wall cladding, aluminum composite boards, whose thickness is 6 - 8 mm, appealed to advertisers. Large billboards can be seen on the side of the road, near the mall and inside the office. Some online stores are focused exclusively on customers who create outdoor advertising.

Unique view of trading floors, offices and metro stations

The use of aluminum panels for interior decoration

Take a closer look at the buildings, the appearance of which stands out for its originality. Many got their wonderful look thanks to the designers and aluminum finishes. Composite material strikes with the richness of colors, textures and wall shapes. The thickness and weight of the material are invisible. The façades curve in defiance of the laws of standard construction and float above the ground.

Lightweight composite slabs are used to decorate offices and trading floors. Aluminum paneling can be seen at some Moscow metro stations. Exhibitions and business centers in their design use light metal materials for advertising and information boards. Wall decoration looks fantastic if designers have used the unlimited possibilities of composite panels.

With the help of electroplating, milling and bending, 3D drawings are applied to aluminum composite panels. Even fragmentary use transforms the interior, makes it stylish. Partitions are made from plates with a double-sided pattern, the thickness of which is 6 mm. In addition to the aesthetic appearance, thin walls significantly save space and absorb sound.

Wall panels in the interior of bathrooms and kitchens

Zero vapor permeability does not allow you to completely cover the walls of the bathroom with aluminum plates. They can replace the tiles in the shower room, protect the walls above the font and washbasins from splashes. If you want to make a beautiful bathroom with the help of a wonderful material, then put a strong forced ventilation. It will ensure proper ventilation of the damp room. Similarly, the toilet will get rid of odors.

In the kitchen, an apron made of aluminum sheet with a pattern printed on it by digital printing or screen ornament will look great. Usually, walls are lined with moisture-resistant materials, to which the stove and other kitchen equipment are attached. The rest are painted or decorated in a different way.

Ceiling panels and cassettes in aluminum

If we talk about repair work, then the quality of the materials used, as well as several basic parameters, are of great importance. These are durability, strength, decorative qualities and affordable cost. Although it is better to pay once, and not worry that the material will soon become unusable. One such material is aluminum composite panels. What is their peculiarity, how to use products and why are they so popular.

Manufacturing

Aluminum wall panels are produced by many factories that manufacture metal facades. Modern technology is indispensable. The whole process is fully computerized, thanks to which factories produce many units of goods in the shortest possible time. To give the aluminum panels their final shape, a bending method is used. The photo shows exactly how the process takes place:

There are manufacturers who specialize in creating custom-made aluminum panels. Before the production of aluminum products, all the information is discussed with the customer: thickness, color, dimensions, etc. It is possible to satisfy even sophisticated customers who need decorative curves, additional perforations and patterned carvings. For the ability to bend sheets on an individual order, you will need to pay extra.

Where applicable

The main area of ​​application is the cladding of building facades. Moreover, it has been used in this area for a very long time. And if aluminum panels are rare in private housing construction, then gas stations, football stadiums, large warehouses, production workshops or large stores are often faced with metal panels.

Its relevance for such places is due to its high resistance to mechanical damage. But due to the fact that aluminum panels can be made into an attractive and rich design, many homeowners choose these products for facade decoration.

Varieties of aluminum panels

Decorative metal panels that can be used for interior and exterior decoration must meet certain parameters. For example, fire safety, durability, strength, easy installation, good decorative qualities. There are several types of products that differ in the type of material used:

1. From non-ferrous metals: sheet of aluminum, copper. Their cost is much higher than that of analogues. However, everything is due to the long service life, as well as other technical characteristics. Aluminum panels are painted with decorative compositions, treated with polymeric materials or simply polished until smooth.
2. Panels of simple metal, which is rolled on a machine. The size of the product is different, and the thickness is minimal. Such decorative elements can be made with your own hands using a hand tool for bending sheets along their length. This option is much cheaper. The surface is protected with paint so that the material does not rust over time. Unlike aluminum panels, metal panels can corrode when exposed to moisture.

The aluminum profile for wall panels is treated with insulating material from the inside. As a result, they have increased noise absorption. Such a layer is made of soft plates on adhesive tape, the thickness of which is 1–4 mm, as well as from liquid spraying of polyethylene foam. Both the first and the second composition have similar characteristics. They allow you to muffle the sound.

There are several more types of aluminum panels that differ in scope and load capacity. This includes:

1. Wall metal products. They are created in any shape, they can be square, rectangular. Installation is carried out as desired, horizontally or vertically.
2. Ceiling aluminum panels. Mostly made square, hung on the frame.
3. Decorative aluminum panels with pattern perforation. Such aluminum panels are produced by cutting holes according to the order. This is high-tech work done in a factory. They are used as a decorative material with ventilation holes. There are even backlit panels.

The cost of metal products reaches 700 rubles / 1m2. It all depends on the type of coating, as well as the metal used. Aluminum panels are the most expensive - more than 2 thousand rubles.

Advantages and disadvantages

Not without reason the cost of facade aluminum panels is high. They have many advantages over other analogues for facade decoration.

List of pros:

1. Light weight. The thickness of the material is small, so the finish does not heavily load the base of the building. Yes, and transport will be much easier. This applies specifically to aluminum products.
2. Absolute fire safety. The material does not burn, therefore it complies with fire safety regulations.
3. Resistance to mechanical damage. The aluminum panel is durable and protects the wall surface.
4. Long service life, which is at least 30 years. In practice, the lining withstands even more.
5. Moisture resistant. The walls will be protected from negative influences, because the metal does not let precipitation through. The only weak point is the joints of the outer walls. They are sealed.
6. A huge range of colors that allows you to create any facade, depending on the requirements of the customer. In terms of design, the panels are ideal. In addition, they are made with imitation of brickwork or natural wood.
7. Good sound insulation performance.
8. Resistance to influence of the alkaline environment and many acidic reagents.
9. The material is not afraid of sudden changes in temperature, has good frost resistance. The coefficient of deformation with a change in temperature for products is the lowest.
10. Simple finish. To use aluminum panels, you need a standard set of tools and minimal skills to work with them.
11. Products do not rust, do not rot.
12. The metal absorbs radio waves, so the building will be difficult to listen to.

As you can see, aluminum products have many advantages. However, there are also disadvantages:

• high price;
• low thermal insulation of the building. You will have to mount insulation material on the wall, covering it with aluminum panels;
• the material conducts current well, however, this does not affect the operation of the building.

Sheet mounting secrets

Immediately before work, you need to buy panels, as well as stock up on tools and materials. We will talk more about the mounting system below.

If we talk about installation, then it is not easy, however, with instructions, everything is possible. Before installing metal wall panels, you need to remove the old finishing material. Plaster, falling tiles, plants on the facade.

The next step is the installation of a metal crate. It is fixed to the wall with dowels. Brackets hold the entire structure, and panels are attached to the rails by means of bolts. Work begins at the top, gradually moving down.

Fastening system

Correct installation is possible due to the use of the fastening system. All elements for work are made of aluminum alloy.

List of wall connection profiles:

1. Profile GT-08. It has a groove width of 3 mm, dimensions 19x25 mm.
2. Profile GT-09. It has a groove width of 4 mm, dimensions 17x23 mm.
3. GT-10 profile. It has a groove width of 6 mm, dimensions 17x23.5 mm.
4. GT-11 profile. It has a groove width of 8 mm, dimensions 17x24.5 mm.
5. GT-46 profile. It has a groove width of 3 mm.
6. GT-47 profile. It has a groove width of 4 mm.
7. GT-22 profile. It has dimensions of 40x40x20 mm.
8. GT-23 profile. It has dimensions of 40x40x20 mm.

List of aluminum profiles for creating a ventilated facade:

1. Main guide (GT-12, GT-052). Length 6 m.
2. Sliding bracket (GT-31, GT-32). Length 5 cm.
3. Bracket for wall (GT-041). Length 5 cm.
4. Latch (GT-06).
5. Cassette holder (GT-07).
6. Washer (GT-03).

When it comes to structures for outdoor decoration, they must be reliably protected. When creating a frame under the panel, which consists of internal and external corners, starting rail, connecting strips, finishing rail, trim and brackets, you need to follow the instructions and be careful so that the quality of the finish is the best.

Aluminium-composite panels are expensive, elite materials for facade finishing. Although they have a lot of advantages, only a few allow themselves to finish a private house.

At first glance, aluminum wall panels fail to attract buyers. Yes, metal structures have always been considered massive and rough, so they have never been used in finishing work. Today, manufacturers are ready to change the minds of buyers. They offer a wide range, which allows you to make an excellent choice for a project of any complexity.

Exterior aluminum panels

First of all, you need to talk about the exterior decoration of the house. According to buyers, decorative aluminum panels cannot provide protection and thermal insulation. Still, the metal always remains cold, which means that the facade will receive only additional aesthetic beauty.

In fact, the technology of mounting materials involves the use of special profiles. They allow you to pre-use foam or polystyrene foam, which will remain invisible under the amazing shiny surface. This will significantly increase the thermal insulation in the house.

Interestingly, professional builders always remind that from this point of view, metal is much more useful. If necessary, the panels can always be dismantled without damage in order to carry out major repairs. If you apply traditional plaster to the heat-insulating material, it will remain intact for the rest of your life.

Aluminum panels for interior decoration

Sometimes aluminum panels are used at home

In modern apartment interiors, you can often find decorative aluminum panels with two-color anodizing. Outwardly, they do not give themselves away, so the metal surface is recognized only after touching. Are such projects popular? Of course, new style trends include such wall decoration, especially since it has a couple of important advantages.

When panels are used in the interior, you can always hide various engineering communications under them. Moreover, this is done even for water supply and heating systems, since aluminum is almost not subject to corrosion. As a result of such work, without additional surface preparation, it is possible to hide individual elements that often remain in sight.

Also, aluminum wall panels have amazing beauty. Even a smooth multi-colored surface allows you to add attractive details to the interior design. The brightness and ease of cleaning captivates people, prompting them with ample opportunities in finishing. Moreover, the manufacturers even offered original drawings that help to abandon the decor in the room.

Finally, designers allow interesting variations when working with three-dimensional panel surfaces. Similar options were met in Soviet times, and today they have become an amazing addition to the modern style of interiors. In the assortment of large manufacturers, you can find many different types of 3D textures that completely fill the walls in various rooms. They proved to be an important innovation that changed the way many professional designers work.

No one thought that solid aluminum alloy panels would push the boundaries of finishing work. It would seem that metal is not suitable for creating a comfortable atmosphere or keeping warm in the house. However, the completed projects confirm the claims of manufacturers who have managed to combine ease of installation, durability and amazing beauty. Because of this, today it is worth taking the panels seriously, because with their help you can categorically change the interior or facade in any house, spending a minimum of money.

Composite panel installation video

Check out the video material on the installation of aluminum composite panels:

A popular product has the following layering sequence:

• protective coating with anti-corrosion properties;
• a primer to make the aluminum sandwich panel resistant to rust;
• the first sheet of aluminum up to 0.5 mm thick;
• plastic layer;
• second aluminum sheet up to 0.5 mm thick;
• primer layer of a composite based on polyvinylidene fluoride resin;
• paint composition;
• protective film.

The aluminum panel can have different thicknesses for easy selection according to the tasks. Products of well-known brands have a non-combustible base.

Advantages of aluminum sandwich panels

The most significant advantages of products are light weight, fire resistance, durability, strength, reliability, elasticity. Aluminum composite panels are available in different shades. Color saturation does not change over time, traces of fading or cracking are invisible on the surface.

The aluminum composite can have a complex shape for decorating corners, oval objects. Products can be bent at an angle up to 180 degrees. The aluminum panel is processed in various ways - cut, sawn, bent, rolled, etc.

Plates are characterized by increased resistance to external factors. Aluminum composite panels are resistant to corrosion and chemical attack. They do not deform under pressure and shock. The aluminum panel withstands sharp temperature fluctuations. It is allowed to use plates in any climatic conditions.

The aluminum composite has excellent noise-absorbing properties, has a stylish and attractive appearance.

Scope of aluminum sandwich panels:

• The slabs are in demand for arranging exhibition pavilions or other temporary demonstration facilities.
• Restoration of old buildings. Panels do not exert additional load on structural parts.
• Used for the device of ventilated facades, for the internal arrangement of public buildings.
• The material is laid on the walls and ceilings of airports, railway stations, car dealerships, cinemas, shopping centers.

Buy aluminum composite panels of any thickness by calling one of the contact numbers in Moscow. You can also specify the price for large volumes of products by phone. To find out more about the characteristics of the material, submit a request through the online form. The Remeks company guarantees the minimum terms of order processing and fast delivery of aluminum panels in Moscow and St. Petersburg.